summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/hsi
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-06-17 22:16:07 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-06-19 09:41:51 +0200
commit9313920df6d3d55fbd03ce8ec1c0da9a10c29824 (patch)
treeef80d80abbaf46293b777ead52caddd9d5d97644 /dts/Bindings/hsi
parent83e875e1f45beffe399cff0ff6128e0fca9da168 (diff)
downloadbarebox-9313920df6d3d55fbd03ce8ec1c0da9a10c29824.tar.gz
barebox-9313920df6d3d55fbd03ce8ec1c0da9a10c29824.tar.xz
dts: update to v3.16-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/hsi')
-rw-r--r--dts/Bindings/hsi/client-devices.txt44
-rw-r--r--dts/Bindings/hsi/nokia-modem.txt57
-rw-r--r--dts/Bindings/hsi/omap-ssi.txt97
3 files changed, 198 insertions, 0 deletions
diff --git a/dts/Bindings/hsi/client-devices.txt b/dts/Bindings/hsi/client-devices.txt
new file mode 100644
index 0000000000..104c9a3e57
--- /dev/null
+++ b/dts/Bindings/hsi/client-devices.txt
@@ -0,0 +1,44 @@
+Each HSI port is supposed to have one child node, which
+symbols the remote device connected to the HSI port. The
+following properties are standardized for HSI clients:
+
+Required HSI configuration properties:
+
+- hsi-channel-ids: A list of channel ids
+
+- hsi-rx-mode: Receiver Bit transmission mode ("stream" or "frame")
+- hsi-tx-mode: Transmitter Bit transmission mode ("stream" or "frame")
+- hsi-mode: May be used instead hsi-rx-mode and hsi-tx-mode if
+ the transmission mode is the same for receiver and
+ transmitter
+- hsi-speed-kbps: Max bit transmission speed in kbit/s
+- hsi-flow: RX flow type ("synchronized" or "pipeline")
+- hsi-arb-mode: Arbitration mode for TX frame ("round-robin", "priority")
+
+Optional HSI configuration properties:
+
+- hsi-channel-names: A list with one name per channel specified in the
+ hsi-channel-ids property
+
+
+Device Tree node example for an HSI client:
+
+hsi-controller {
+ hsi-port {
+ modem: hsi-client {
+ compatible = "nokia,n900-modem";
+
+ hsi-channel-ids = <0>, <1>, <2>, <3>;
+ hsi-channel-names = "mcsaab-control",
+ "speech-control",
+ "speech-data",
+ "mcsaab-data";
+ hsi-speed-kbps = <55000>;
+ hsi-mode = "frame";
+ hsi-flow = "synchronized";
+ hsi-arb-mode = "round-robin";
+
+ /* more client specific properties */
+ };
+ };
+};
diff --git a/dts/Bindings/hsi/nokia-modem.txt b/dts/Bindings/hsi/nokia-modem.txt
new file mode 100644
index 0000000000..8a97978045
--- /dev/null
+++ b/dts/Bindings/hsi/nokia-modem.txt
@@ -0,0 +1,57 @@
+Nokia modem client bindings
+
+The Nokia modem HSI client follows the common HSI client binding
+and inherits all required properties. The following additional
+properties are needed by the Nokia modem HSI client:
+
+Required properties:
+- compatible: Should be one of
+ "nokia,n900-modem"
+- hsi-channel-names: Should contain the following strings
+ "mcsaab-control"
+ "speech-control"
+ "speech-data"
+ "mcsaab-data"
+- gpios: Should provide a GPIO handler for each GPIO listed in
+ gpio-names
+- gpio-names: Should contain the following strings
+ "cmt_apeslpx"
+ "cmt_rst_rq"
+ "cmt_en"
+ "cmt_rst"
+ "cmt_bsi"
+- interrupts: Should be IRQ handle for modem's reset indication
+
+Example:
+
+&ssi_port {
+ modem: hsi-client {
+ compatible = "nokia,n900-modem";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&modem_pins>;
+
+ hsi-channel-ids = <0>, <1>, <2>, <3>;
+ hsi-channel-names = "mcsaab-control",
+ "speech-control",
+ "speech-data",
+ "mcsaab-data";
+ hsi-speed-kbps = <55000>;
+ hsi-mode = "frame";
+ hsi-flow = "synchronized";
+ hsi-arb-mode = "round-robin";
+
+ interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
+ <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
+ <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+ <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+ <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+ gpio-names = "cmt_apeslpx",
+ "cmt_rst_rq",
+ "cmt_en",
+ "cmt_rst",
+ "cmt_bsi";
+ };
+};
diff --git a/dts/Bindings/hsi/omap-ssi.txt b/dts/Bindings/hsi/omap-ssi.txt
new file mode 100644
index 0000000000..f26625e426
--- /dev/null
+++ b/dts/Bindings/hsi/omap-ssi.txt
@@ -0,0 +1,97 @@
+OMAP SSI controller bindings
+
+OMAP Synchronous Serial Interface (SSI) controller implements a legacy
+variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+
+Required properties:
+- compatible: Should include "ti,omap3-ssi".
+- reg-names: Contains the values "sys" and "gdd" (in this order).
+- reg: Contains a matching register specifier for each entry
+ in reg-names.
+- interrupt-names: Contains the value "gdd_mpu".
+- interrupts: Contains matching interrupt information for each entry
+ in interrupt-names.
+- ranges: Represents the bus address mapping between the main
+ controller node and the child nodes below.
+- clock-names: Must include the following entries:
+ "ssi_ssr_fck": The OMAP clock of that name
+ "ssi_sst_fck": The OMAP clock of that name
+ "ssi_ick": The OMAP clock of that name
+- clocks: Contains a matching clock specifier for each entry in
+ clock-names.
+- #address-cells: Should be set to <1>
+- #size-cells: Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible: Should be set to the following value
+ ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg-names: Contains the values "tx" and "rx" (in this order).
+- reg: Contains a matching register specifier for each entry
+ in reg-names.
+- interrupt-parent Should be a phandle for the interrupt controller
+- interrupts: Should contain interrupt specifiers for mpu interrupts
+ 0 and 1 (in this order).
+- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
+ events for the port. This is an optional board-specific
+ property. If it's missing the port will not be
+ enabled.
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+
+ /* needed until hwmod is updated to use the compatible string */
+ ti,hwmods = "ssi";
+
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys",
+ "gdd";
+
+ interrupts = <55>;
+ interrupt-names = "gdd_mpu";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ssi-port@4805a000 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <67>,
+ <68>;
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+ }
+
+ ssi-port@4805a000 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805b000 0x800>,
+ <0x4805b800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <69>,
+ <70>;
+
+ status = "disabled"; /* second port is not used on N900 */
+ }
+}