summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/input
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2015-03-03 08:11:01 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2015-03-03 08:11:01 +0100
commiteaa819409db6ac80fbd7c3d36450b2d1bec93576 (patch)
tree6cd5e0c7f8abe121af237b701ee9e0e1b6f7e40d /dts/Bindings/input
parent0c9aadb6185e1d84746b632284bc89e4e4c80cd3 (diff)
downloadbarebox-eaa819409db6ac80fbd7c3d36450b2d1bec93576.tar.gz
barebox-eaa819409db6ac80fbd7c3d36450b2d1bec93576.tar.xz
dts: update to v4.0-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/input')
-rw-r--r--dts/Bindings/input/e3x0-button.txt25
-rw-r--r--dts/Bindings/input/regulator-haptic.txt21
-rw-r--r--dts/Bindings/input/sun4i-lradc-keys.txt62
-rw-r--r--dts/Bindings/input/touchscreen/sun4i.txt4
-rw-r--r--dts/Bindings/input/touchscreen/ti-tsc-adc.txt15
-rw-r--r--dts/Bindings/input/tps65218-pwrbutton.txt17
6 files changed, 143 insertions, 1 deletions
diff --git a/dts/Bindings/input/e3x0-button.txt b/dts/Bindings/input/e3x0-button.txt
new file mode 100644
index 0000000000..751665e8e4
--- /dev/null
+++ b/dts/Bindings/input/e3x0-button.txt
@@ -0,0 +1,25 @@
+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+ - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupt-parent:
+ - a phandle to the interrupt controller that it is attached to.
+- interrupts: should be one of the following
+ - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+ - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+ button {
+ compatible = "ettus,e3x0-button";
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 1>, <0 31 1>;
+ interrupt-names = "press", "release";
+ }
diff --git a/dts/Bindings/input/regulator-haptic.txt b/dts/Bindings/input/regulator-haptic.txt
new file mode 100644
index 0000000000..3ed1c7eb2f
--- /dev/null
+++ b/dts/Bindings/input/regulator-haptic.txt
@@ -0,0 +1,21 @@
+* Regulator Haptic Device Tree Bindings
+
+Required Properties:
+ - compatible : Should be "regulator-haptic"
+ - haptic-supply : Power supply to the haptic motor.
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - max-microvolt : The maximum voltage value supplied to the haptic motor.
+ [The unit of the voltage is a micro]
+
+ - min-microvolt : The minimum voltage value supplied to the haptic motor.
+ [The unit of the voltage is a micro]
+
+Example:
+
+ haptics {
+ compatible = "regulator-haptic";
+ haptic-supply = <&motor_regulator>;
+ max-microvolt = <2700000>;
+ min-microvolt = <1100000>;
+ };
diff --git a/dts/Bindings/input/sun4i-lradc-keys.txt b/dts/Bindings/input/sun4i-lradc-keys.txt
new file mode 100644
index 0000000000..b9c32f6fd6
--- /dev/null
+++ b/dts/Bindings/input/sun4i-lradc-keys.txt
@@ -0,0 +1,62 @@
+Allwinner sun4i low res adc attached tablet keys
+------------------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-lradc-keys"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - vref-supply: powersupply for the lradc reference voltage
+
+Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
+
+Required subnode-properties:
+ - label: Descriptive name of the key.
+ - linux,code: Keycode to emit.
+ - channel: Channel this key is attached to, mut be 0 or 1.
+ - voltage: Voltage in ┬ÁV at lradc input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ vref-supply = <&reg_vcc3v0>;
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+ };
diff --git a/dts/Bindings/input/touchscreen/sun4i.txt b/dts/Bindings/input/touchscreen/sun4i.txt
index aef57791f4..433332d3b2 100644
--- a/dts/Bindings/input/touchscreen/sun4i.txt
+++ b/dts/Bindings/input/touchscreen/sun4i.txt
@@ -2,9 +2,10 @@ sun4i resistive touchscreen controller
--------------------------------------
Required properties:
- - compatible: "allwinner,sun4i-a10-ts"
+ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
- reg: mmio address range of the chip
- interrupts: interrupt to which the chip is connected
+ - #thermal-sensor-cells: shall be 0
Optional properties:
- allwinner,ts-attached: boolean indicating that an actual touchscreen is
@@ -17,4 +18,5 @@ Example:
reg = <0x01c25000 0x100>;
interrupts = <29>;
allwinner,ts-attached;
+ #thermal-sensor-cells = <0>;
};
diff --git a/dts/Bindings/input/touchscreen/ti-tsc-adc.txt b/dts/Bindings/input/touchscreen/ti-tsc-adc.txt
index 878549ba81..6c4fb34823 100644
--- a/dts/Bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/dts/Bindings/input/touchscreen/ti-tsc-adc.txt
@@ -28,6 +28,20 @@ Required properties:
ti,adc-channels: List of analog inputs available for ADC.
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
+Optional properties:
+- child "tsc"
+ ti,charge-delay: Length of touch screen charge delay step in terms of
+ ADC clock cycles. Charge delay value should be large
+ in order to avoid false pen-up events. This value
+ effects the overall sampling speed, hence need to be
+ kept as low as possible, while avoiding false pen-up
+ event. Start from a lower value, say 0x400, and
+ increase value until false pen-up events are avoided.
+ The pen-up detection happens immediately after the
+ charge step, so this does in fact function as a
+ hardware knob for adjusting the amount of "settling
+ time".
+
Example:
tscadc: tscadc@44e0d000 {
compatible = "ti,am3359-tscadc";
@@ -36,6 +50,7 @@ Example:
ti,x-plate-resistance = <200>;
ti,coordiante-readouts = <5>;
ti,wire-config = <0x00 0x11 0x22 0x33>;
+ ti,charge-delay = <0x400>;
};
adc {
diff --git a/dts/Bindings/input/tps65218-pwrbutton.txt b/dts/Bindings/input/tps65218-pwrbutton.txt
new file mode 100644
index 0000000000..e30e0b93f2
--- /dev/null
+++ b/dts/Bindings/input/tps65218-pwrbutton.txt
@@ -0,0 +1,17 @@
+Texas Instruments TPS65218 power button
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65218-pwrbutton"
+- interrupts: should be one of the following
+ - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Example:
+
+&tps {
+ power-button {
+ compatible = "ti,tps65218-pwrbutton";
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
+};