dts: update to v5.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 27 deletions

diff --git a/dts/Bindings/memory-controllers/brcm,dpfe-cpu.txt b/dts/Bindings/memory-controllers/brcm,dpfe-cpu.txt
deleted file mode 100644
index 82d923ef41..0000000000
--- a/dts/Bindings/memory-controllers/brcm,dpfe-cpu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-DDR PHY Front End (DPFE) for Broadcom STB
-=========================================
-
-DPFE and the DPFE firmware provide an interface for the host CPU to
-communicate with the DCPU, which resides inside the DDR PHY.
-
-There are three memory regions for interacting with the DCPU. These are
-specified in a single reg property.
-
-Required properties:
-  - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu"
-    or "brcm,dpfe-cpu"
-  - reg: must reference three register ranges
-      - start address and length of the DCPU register space
-      - start address and length of the DCPU data memory space
-      - start address and length of the DCPU instruction memory space
-  - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem";
-        they must be in the same order as the register declarations
-
-Example:
-	dpfe_cpu0: dpfe-cpu@f1132000 {
-		compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
-		reg =  <0xf1132000 0x180
-			0xf1134000 0x1000
-			0xf1138000 0x4000>;
-		reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
-	};