dts: update to v5.16-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 440 insertions, 0 deletions

diff --git a/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml
new file mode 100644
index 0000000000..25ed0266f6
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - elpida,ECB240ABACN
+              - elpida,B8132B2PB-6D-F
+          - enum:
+              - jedec,lpddr2-s4
+      - items:
+          - enum:
+              - jedec,lpddr2-s2
+      - items:
+          - enum:
+              - jedec,lpddr2-nvm
+
+  revision-id1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 1 value of SDRAM chip. Obtained from device datasheet.
+
+  revision-id2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 2 value of SDRAM chip. Obtained from device datasheet.
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Density in megabits of SDRAM chip. Obtained from device datasheet.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 4096
+      - 8192
+      - 16384
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      IO bus width in bits of SDRAM chip. Obtained from device datasheet.
+    enum:
+      - 32
+      - 16
+      - 8
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Active bank a to active bank b in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles. Obtained from device datasheet.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      WRITE recovery time in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tRASmin-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row active time in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Four-bank activate window in terms of number of clock cycles. Obtained
+      from device datasheet.
+
+patternProperties:
+  "^lpddr2-timings":
+    type: object
+    description: |
+      The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+      "lpddr2-timings" provides AC timing parameters of the device for
+      a given speed-bin. The user may provide the timings for as many
+      speed-bins as is required. Please see Documentation/devicetree/
+      bindings/memory-controllers/ddr/lpddr2-timings.txt for more information
+      on "lpddr2-timings".
+
+required:
+  - compatible
+  - density
+  - io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    elpida_ECB240ABACN: lpddr2 {
+        compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
+        density = <2048>;
+        io-width = <32>;
+        revision-id1 = <1>;
+        revision-id2 = <0>;
+
+        tRPab-min-tck = <3>;
+        tRCD-min-tck = <3>;
+        tWR-min-tck = <3>;
+        tRASmin-min-tck = <3>;
+        tRRD-min-tck = <2>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tCKE-min-tck = <3>;
+        tCKESR-min-tck = <3>;
+        tFAW-min-tck = <8>;
+
+        timings_elpida_ECB240ABACN_400mhz: lpddr2-timings0 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <400000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <7500>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+
+        timings_elpida_ECB240ABACN_200mhz: lpddr2-timings1 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <200000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <10000>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+    };
diff --git a/dts/Bindings/memory-controllers/ddr/lpddr2-timings.txt b/dts/Bindings/memory-controllers/ddr/lpddr2-timings.txt
new file mode 100644
index 0000000000..9ceb19e0c7
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/lpddr2-timings.txt
@@ -0,0 +1,52 @@
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+
+Example:
+
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+	compatible	= "jedec,lpddr2-timings";
+	min-freq	= <10000000>;
+	max-freq	= <400000000>;
+	tRPab		= <21000>;
+	tRCD		= <18000>;
+	tWR		= <15000>;
+	tRAS-min	= <42000>;
+	tRRD		= <10000>;
+	tWTR		= <7500>;
+	tXP		= <7500>;
+	tRTP		= <7500>;
+	tCKESR		= <15000>;
+	tDQSCK-max	= <5500>;
+	tFAW		= <50000>;
+	tZQCS		= <90000>;
+	tZQCL		= <360000>;
+	tZQinit		= <1000000>;
+	tRAS-max-ns	= <70000>;
+};
diff --git a/dts/Bindings/memory-controllers/ddr/lpddr3-timings.txt b/dts/Bindings/memory-controllers/ddr/lpddr3-timings.txt
new file mode 100644
index 0000000000..84705e50a3
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/lpddr3-timings.txt
@@ -0,0 +1,58 @@
+* AC timing parameters of LPDDR3 memories for a given speed-bin.
+
+The structures are based on LPDDR2 and extended where needed.
+
+Required properties:
+- compatible : Should be "jedec,lpddr3-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds).
+- tRFC
+- tRRD
+- tRPab
+- tRPpb
+- tRCD
+- tRC
+- tRAS
+- tWTR
+- tWR
+- tRTP
+- tW2W-C2C
+- tR2R-C2C
+- tFAW
+- tXSR
+- tXP
+- tCKE
+- tCKESR
+- tMRD
+
+Example:
+
+timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+	compatible	= "jedec,lpddr3-timings";
+	reg		= <800000000>; /* workaround: it shows max-freq */
+	min-freq	= <100000000>;
+	tRFC		= <65000>;
+	tRRD		= <6000>;
+	tRPab		= <12000>;
+	tRPpb		= <12000>;
+	tRCD		= <10000>;
+	tRC		= <33750>;
+	tRAS		= <23000>;
+	tWTR		= <3750>;
+	tWR		= <7500>;
+	tRTP		= <3750>;
+	tW2W-C2C	= <0>;
+	tR2R-C2C	= <0>;
+	tFAW		= <25000>;
+	tXSR		= <70000>;
+	tXP		= <3750>;
+	tCKE		= <3750>;
+	tCKESR		= <3750>;
+	tMRD		= <7000>;
+};
diff --git a/dts/Bindings/memory-controllers/ddr/lpddr3.txt b/dts/Bindings/memory-controllers/ddr/lpddr3.txt
new file mode 100644
index 0000000000..031af5fb03
--- /dev/null
+++ b/dts/Bindings/memory-controllers/ddr/lpddr3.txt
@@ -0,0 +1,107 @@
+* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
+
+Required properties:
+- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
+  Example "<vendor>,<type>" values:
+    "samsung,K3QF2F20DB"
+
+- density  : <u32> representing density in Mb (Mega bits)
+- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
+- #address-cells: Must be set to 1
+- #size-cells: Must be set to 0
+
+Optional properties:
+
+- manufacturer-id : <u32>     Manufacturer ID value read from Mode Register 5
+- revision-id     : <u32 u32> Revision IDs read from Mode Registers 6 and 7
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRFC-min-tck
+- tRRD-min-tck
+- tRPab-min-tck
+- tRPpb-min-tck
+- tRCD-min-tck
+- tRC-min-tck
+- tRAS-min-tck
+- tWTR-min-tck
+- tWR-min-tck
+- tRTP-min-tck
+- tW2W-C2C-min-tck
+- tR2R-C2C-min-tck
+- tWL-min-tck
+- tDQSCK-min-tck
+- tRL-min-tck
+- tFAW-min-tck
+- tXSR-min-tck
+- tXP-min-tck
+- tCKE-min-tck
+- tCKESR-min-tck
+- tMRD-min-tck
+
+Child nodes:
+- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
+  "lpddr3-timings" provides AC timing parameters of the device for
+  a given speed-bin. Please see
+  Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+  for more information on "lpddr3-timings"
+
+Example:
+
+samsung_K3QF2F20DB: lpddr3 {
+	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
+	density		= <16384>;
+	io-width	= <32>;
+	manufacturer-id = <1>;
+	revision-id     = <123 234>;
+	#address-cells	= <1>;
+	#size-cells	= <0>;
+
+	tRFC-min-tck		= <17>;
+	tRRD-min-tck		= <2>;
+	tRPab-min-tck		= <2>;
+	tRPpb-min-tck		= <2>;
+	tRCD-min-tck		= <3>;
+	tRC-min-tck		= <6>;
+	tRAS-min-tck		= <5>;
+	tWTR-min-tck		= <2>;
+	tWR-min-tck		= <7>;
+	tRTP-min-tck		= <2>;
+	tW2W-C2C-min-tck	= <0>;
+	tR2R-C2C-min-tck	= <0>;
+	tWL-min-tck		= <8>;
+	tDQSCK-min-tck		= <5>;
+	tRL-min-tck		= <14>;
+	tFAW-min-tck		= <5>;
+	tXSR-min-tck		= <12>;
+	tXP-min-tck		= <2>;
+	tCKE-min-tck		= <2>;
+	tCKESR-min-tck		= <2>;
+	tMRD-min-tck		= <5>;
+
+	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+		compatible	= "jedec,lpddr3-timings";
+		/* workaround: 'reg' shows max-freq */
+		reg		= <800000000>;
+		min-freq	= <100000000>;
+		tRFC		= <65000>;
+		tRRD		= <6000>;
+		tRPab		= <12000>;
+		tRPpb		= <12000>;
+		tRCD		= <10000>;
+		tRC		= <33750>;
+		tRAS		= <23000>;
+		tWTR		= <3750>;
+		tWR		= <7500>;
+		tRTP		= <3750>;
+		tW2W-C2C	= <0>;
+		tR2R-C2C	= <0>;
+		tFAW		= <25000>;
+		tXSR		= <70000>;
+		tXP		= <3750>;
+		tCKE		= <3750>;
+		tCKESR		= <3750>;
+		tMRD		= <7000>;
+	};
+}