dts: update to v4.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 files changed, 166 insertions, 9 deletions

diff --git a/dts/Bindings/mmc/amlogic,meson-mx-sdio.txt b/dts/Bindings/mmc/amlogic,meson-mx-sdio.txt
new file mode 100644
index 0000000000..8765c605e6
--- /dev/null
+++ b/dts/Bindings/mmc/amlogic,meson-mx-sdio.txt
@@ -0,0 +1,54 @@
+* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller
+
+The highspeed MMC host controller on Amlogic SoCs provides an interface
+for MMC, SD, SDIO and SDHC types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 2.0.
+
+The hardware provides an internal "mux" which allows up to three slots
+to be controlled. Only one slot can be accessed at a time.
+
+Required properties:
+ - compatible : must be one of
+	- "amlogic,meson8-sdio"
+	- "amlogic,meson8b-sdio"
+	along with the generic "amlogic,meson-mx-sdio"
+ - reg : mmc controller base registers
+ - interrupts : mmc controller interrupt
+ - #address-cells : must be 1
+ - size-cells : must be 0
+ - clocks : phandle to clock providers
+ - clock-names : must contain "core" and "clkin"
+
+Required child nodes:
+A node for each slot provided by the MMC controller is required.
+NOTE: due to a driver limitation currently only one slot (= child node)
+      is supported!
+
+Required properties on each child node (= slot):
+ - compatible : must be "mmc-slot" (see mmc.txt within this directory)
+ - reg : the slot (or "port") ID
+
+Optional properties on each child node (= slot):
+ - bus-width : must be 1 or 4 (8-bit bus is not supported)
+ - for cd and all other additional generic mmc parameters
+   please refer to mmc.txt within this directory
+
+Examples:
+	mmc@c1108c20 {
+		compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+		reg = <0xc1108c20 0x20>;
+		interrupts = <0 28 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+		clock-names = "core", "clkin";
+
+		slot@1 {
+			compatible = "mmc-slot";
+			reg = <1>;
+
+			bus-width = <4>;
+		};
+	};
diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt
index b32ade645a..fb11ae8b3b 100644
--- a/dts/Bindings/mmc/mmc.txt
+++ b/dts/Bindings/mmc/mmc.txt
@@ -53,6 +53,9 @@ Optional properties:
 - no-sdio: controller is limited to send sdio cmd during initialization
 - no-sd: controller is limited to send sd cmd during initialization
 - no-mmc: controller is limited to send mmc cmd during initialization
+- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type.
+  The value <n> is the driver type as specified in the eMMC specification
+  (table 206 in spec version 5.1).
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
@@ -143,7 +146,7 @@ sdhci@ab000000 {
 
 Example with sdio function subnode:
 
-mmc3: mmc@01c12000 {
+mmc3: mmc@1c12000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
diff --git a/dts/Bindings/mmc/mtk-sd.txt b/dts/Bindings/mmc/mtk-sd.txt
index 4182ea36ca..72d2a734ab 100644
--- a/dts/Bindings/mmc/mtk-sd.txt
+++ b/dts/Bindings/mmc/mtk-sd.txt
@@ -7,10 +7,18 @@ This file documents differences between the core properties in mmc.txt
 and the properties used by the msdc driver.
 
 Required properties:
-- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
+- compatible: value should be either of the following.
+	"mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
+	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
+	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
+	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
+- reg: physical base address of the controller and length
 - interrupts: Should contain MSDC interrupt number
-- clocks: MSDC source clock, HCLK
-- clock-names: "source", "hclk"
+- clocks: Should contain phandle for the clock feeding the MMC controller
+- clock-names: Should contain the following:
+	"source" - source clock (required)
+	"hclk" - HCLK which used for host (required)
+	"source_cg" - independent source clock gate (required for MT2712)
 - pinctrl-names: should be "default", "state_uhs"
 - pinctrl-0: should contain default/high speed pin ctrl
 - pinctrl-1: should contain uhs mode pin ctrl
@@ -30,6 +38,10 @@ Optional properties:
 - mediatek,hs400-cmd-resp-sel-rising:  HS400 command response sample selection
 				       If present,HS400 command responses are sampled on rising edges.
 				       If not present,HS400 command responses are sampled on falling edges.
+- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
+		     error caused by stop clock(fifo full)
+		     Valid range = [0:0x7]. if not present, default value is 0.
+		     applied to compatible "mediatek,mt2701-mmc".
 
 Examples:
 mmc0: mmc@11230000 {
diff --git a/dts/Bindings/mmc/sdhci-fujitsu.txt b/dts/Bindings/mmc/sdhci-fujitsu.txt
index de2c53cff4..3ee9263adf 100644
--- a/dts/Bindings/mmc/sdhci-fujitsu.txt
+++ b/dts/Bindings/mmc/sdhci-fujitsu.txt
@@ -15,6 +15,8 @@ Required properties:
 Optional properties:
 - vqmmc-supply: phandle to the regulator device tree node, mentioned
   as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
+  requires the CMD_DAT_DELAY control to be enabled.
 
 Example:
 
diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt
index 0576264eab..bfdcdc4ccd 100644
--- a/dts/Bindings/mmc/sdhci-msm.txt
+++ b/dts/Bindings/mmc/sdhci-msm.txt
@@ -18,6 +18,8 @@ Required properties:
 	"core"	- SDC MMC clock (MCLK) (required)
 	"bus"	- SDCC bus voter clock (optional)
 	"xo"	- TCXO clock (optional)
+	"cal"	- reference clock for RCLK delay calibration (optional)
+	"sleep"	- sleep clock for RCLK delay calibration (optional)
 
 Example:
 
diff --git a/dts/Bindings/mmc/sdhci-omap.txt b/dts/Bindings/mmc/sdhci-omap.txt
new file mode 100644
index 0000000000..51775a372c
--- /dev/null
+++ b/dts/Bindings/mmc/sdhci-omap.txt
@@ -0,0 +1,16 @@
+* TI OMAP SDHCI Controller
+
+Refer to mmc.txt for standard MMC bindings.
+
+Required properties:
+- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
+
+Example:
+	mmc1: mmc@4809c000 {
+		compatible = "ti,dra7-sdhci";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+	};
diff --git a/dts/Bindings/mmc/sdhci-st.txt b/dts/Bindings/mmc/sdhci-st.txt
index e356455983..6b3d40ca39 100644
--- a/dts/Bindings/mmc/sdhci-st.txt
+++ b/dts/Bindings/mmc/sdhci-st.txt
@@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 {
 
 /* Example SD stih407 family configuration */
 
-mmc1: sdhci@09080000 {
+mmc1: sdhci@9080000 {
 	compatible	= "st,sdhci-stih407", "st,sdhci";
 	reg		= <0x09080000 0x7ff>;
 	reg-names	= "mmc";
@@ -90,7 +90,7 @@ mmc1: sdhci@09080000 {
 
 /* Example eMMC stih407 family configuration */
 
-mmc0: sdhci@09060000 {
+mmc0: sdhci@9060000 {
 	compatible	= "st,sdhci-stih407", "st,sdhci";
 	reg		= <0x09060000 0x7ff>, <0x9061008 0x20>;
 	reg-names	= "mmc", "top-mmc-delay";
diff --git a/dts/Bindings/mmc/sunxi-mmc.txt b/dts/Bindings/mmc/sunxi-mmc.txt
index 63b57e2a10..132e0007d7 100644
--- a/dts/Bindings/mmc/sunxi-mmc.txt
+++ b/dts/Bindings/mmc/sunxi-mmc.txt
@@ -29,7 +29,7 @@ Optional properties:
 
 Examples:
 	- Within .dtsi:
-	mmc0: mmc@01c0f000 {
+	mmc0: mmc@1c0f000 {
 		compatible = "allwinner,sun5i-a13-mmc";
 		reg = <0x01c0f000 0x1000>;
 		clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
@@ -39,7 +39,7 @@ Examples:
 	};
 
 	- Within dts:
-	mmc0: mmc@01c0f000 {
+	mmc0: mmc@1c0f000 {
 		pinctrl-names = "default", "default";
 		pinctrl-0 = <&mmc0_pins_a>;
 		pinctrl-1 = <&mmc0_cd_pin_reference_design>;
diff --git a/dts/Bindings/mmc/tmio_mmc.txt b/dts/Bindings/mmc/tmio_mmc.txt
index 54ef642f23..3c6762430f 100644
--- a/dts/Bindings/mmc/tmio_mmc.txt
+++ b/dts/Bindings/mmc/tmio_mmc.txt
@@ -10,7 +10,7 @@ described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
 Required properties:
-- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+- compatible: should contain one or more of the following:
 		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
 		"renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC
 		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
@@ -26,6 +26,16 @@ Required properties:
 		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 		"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
 		"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
+		"renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller
+		"renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller
+		"renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1
+					   SDHI controller
+		"renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller
+
+
+		When compatible with the generic version, nodes must list
+		the SoC-specific version corresponding to the platform
+		first followed by the generic version.
 
 - clocks: Most controllers only have 1 clock source per channel. However, on
 	  some variations of this controller, the internal card detection
@@ -43,3 +53,61 @@ Optional properties:
 - pinctrl-names: should be "default", "state_uhs"
 - pinctrl-0: should contain default/high speed pin ctrl
 - pinctrl-1: should contain uhs mode pin ctrl
+
+Example: R8A7790 (R-Car H2) SDHI controller nodes
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee100000 0 0x328>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 314>;
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 314>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee120000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee120000 0 0x328>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 313>;
+		dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+		       <&dmac1 0xc9>, <&dmac1 0xca>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 313>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 312>;
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 312>;
+		status = "disabled";
+	};
+
+	sdhi3: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 311>;
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		resets = <&cpg 311>;
+		status = "disabled";
+	};