dts: update to v4.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 73 insertions, 40 deletions

diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt
index a4a570fb24..cfe8f64eca 100644
--- a/dts/Bindings/net/dsa/dsa.txt
+++ b/dts/Bindings/net/dsa/dsa.txt
@@ -34,13 +34,9 @@ Required properties:
 
 Each port children node must have the following mandatory properties:
 - reg			: Describes the port address in the switch
-- label			: Describes the label associated with this port, which
-                          will become the netdev name. Special labels are
-			  "cpu" to indicate a CPU port and "dsa" to
-			  indicate an uplink/downlink port between switches in
-			  the cluster.
 
-A port labelled "dsa" has the following mandatory property:
+An uplink/downlink port between switches in the cluster has the following
+mandatory property:
 
 - link			: Should be a list of phandles to other switch's DSA
 			  port. This port is used as the outgoing port
@@ -48,12 +44,17 @@ A port labelled "dsa" has the following mandatory property:
 			  information must be given, not just the one hop
 			  routes to neighbouring switches.
 
-A port labelled "cpu" has the following mandatory property:
+A CPU port has the following mandatory property:
 
 - ethernet		: Should be a phandle to a valid Ethernet device node.
                           This host device is what the switch port is
 			  connected to.
 
+A user port has the following optional property:
+
+- label			: Describes the label associated with this port, which
+                          will become the netdev name.
+
 Port child nodes may also contain the following optional standardised
 properties, described in binding documents:
 
@@ -107,7 +108,6 @@ linked into one DSA cluster.
 
 			switch0port5: port@5 {
 				reg = <5>;
-				label = "dsa";
 				phy-mode = "rgmii-txid";
 				link = <&switch1port6
 					&switch2port9>;
@@ -119,7 +119,6 @@ linked into one DSA cluster.
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				ethernet = <&fec1>;
 				fixed-link {
 					speed = <100>;
@@ -165,7 +164,6 @@ linked into one DSA cluster.
 
 			switch1port5: port@5 {
 				reg = <5>;
-				label = "dsa";
 				link = <&switch2port9>;
 				phy-mode = "rgmii-txid";
 				fixed-link {
@@ -176,7 +174,6 @@ linked into one DSA cluster.
 
 			switch1port6: port@6 {
 				reg = <6>;
-				label = "dsa";
 				phy-mode = "rgmii-txid";
 				link = <&switch0port5>;
 				fixed-link {
@@ -255,7 +252,6 @@ linked into one DSA cluster.
 
 			switch2port9: port@9 {
 				reg = <9>;
-				label = "dsa";
 				phy-mode = "rgmii-txid";
 				link = <&switch1port5
 					&switch0port5>;
diff --git a/dts/Bindings/net/dsa/marvell.txt b/dts/Bindings/net/dsa/marvell.txt
index b3dd6b40e0..7ef9dbb089 100644
--- a/dts/Bindings/net/dsa/marvell.txt
+++ b/dts/Bindings/net/dsa/marvell.txt
@@ -14,9 +14,9 @@ The properties described here are those specific to Marvell devices.
 Additional required and optional properties can be found in dsa.txt.
 
 Required properties:
-- compatible	       : Should be one of "marvell,mv88e6085" or
-			 "marvell,mv88e6190"
-- reg                  : Address on the MII bus for the switch.
+- compatible		: Should be one of "marvell,mv88e6085" or
+			  "marvell,mv88e6190"
+- reg			: Address on the MII bus for the switch.
 
 Optional properties:
 
@@ -26,30 +26,67 @@ Optional properties:
 - interrupt-controller	: Indicates the switch is itself an interrupt
 			  controller. This is used for the PHY interrupts.
 #interrupt-cells = <2>	: Controller uses two cells, number and flag
-- mdio			: container of PHY and devices on the switches MDIO
-			  bus
+- mdio			: Container of PHY and devices on the switches MDIO
+			  bus.
+- mdio?		: Container of PHYs and devices on the external MDIO
+			  bus. The node must contains a compatible string of
+			  "marvell,mv88e6xxx-mdio-external"
+
 Example:
 
-       mdio {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               interrupt-parent = <&gpio0>;
-               interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-               interrupt-controller;
-               #interrupt-cells = <2>;
-
-               switch0: switch@0 {
-                       compatible = "marvell,mv88e6085";
-                       reg = <0>;
-		       reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-               };
-               mdio {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       switch1phy0: switch1phy0@0 {
-                               reg = <0>;
-                               interrupt-parent = <&switch0>;
-                               interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-       };
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		switch0: switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		};
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			switch1phy0: switch1phy0@0 {
+				reg = <0>;
+				interrupt-parent = <&switch0>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		switch0: switch@0 {
+			compatible = "marvell,mv88e6390";
+			reg = <0>;
+			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		};
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			switch1phy0: switch1phy0@0 {
+				reg = <0>;
+				interrupt-parent = <&switch0>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		mdio1 {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			switch1phy9: switch1phy0@9 {
+				reg = <9>;
+			};
+		};
+	};