dts: update to v5.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 32 insertions, 0 deletions

diff --git a/dts/Bindings/net/wireless/qcom,ath10k.txt b/dts/Bindings/net/wireless/qcom,ath10k.txt
index ae661e6535..017128394a 100644
--- a/dts/Bindings/net/wireless/qcom,ath10k.txt
+++ b/dts/Bindings/net/wireless/qcom,ath10k.txt
@@ -81,6 +81,12 @@ Optional properties:
 	Definition: Name of external front end module used. Some valid FEM names
 		    for example: "microsemi-lx5586", "sky85703-11"
 		    and "sky85803" etc.
+- qcom,snoc-host-cap-8bit-quirk:
+	Usage: Optional
+	Value type: <empty>
+	Definition: Quirk specifying that the firmware expects the 8bit version
+		    of the host capability QMI request
+- qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
 
 Example (to supply PCI based wifi block details):
 
diff --git a/dts/Bindings/net/wireless/ti,wl1251.txt b/dts/Bindings/net/wireless/ti,wl1251.txt
index bb2fcde6f7..f389505609 100644
--- a/dts/Bindings/net/wireless/ti,wl1251.txt
+++ b/dts/Bindings/net/wireless/ti,wl1251.txt
@@ -35,3 +35,29 @@ Examples:
 		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
 	};
 };
+
+&mmc3 {
+	vmmc-supply = <&wlan_en>;
+
+	bus-width = <4>;
+	non-removable;
+	ti,non-removable;
+	cap-power-off-card;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlan: wifi@1 {
+		compatible = "ti,wl1251";
+
+		reg = <1>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
+
+		ti,wl1251-has-eeprom;
+	};
+};