diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2020-06-23 12:14:59 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2020-07-05 20:49:06 +0200 |
commit | abef60363d8ecac66e45853f328afa8eeb9e00fd (patch) | |
tree | c7d6f1dcf0ef5154b9182da86f1acad048cb7da1 /dts/Bindings/net/wireless | |
parent | e307bc559a2830b7f695150212ea1b26cdca69fb (diff) | |
download | barebox-abef60363d8ecac66e45853f328afa8eeb9e00fd.tar.gz barebox-abef60363d8ecac66e45853f328afa8eeb9e00fd.tar.xz |
dts: update to v5.8-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/net/wireless')
-rw-r--r-- | dts/Bindings/net/wireless/mediatek,mt76.txt | 3 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/qcom,ath10k.txt | 14 |
2 files changed, 17 insertions, 0 deletions
diff --git a/dts/Bindings/net/wireless/mediatek,mt76.txt b/dts/Bindings/net/wireless/mediatek,mt76.txt index 3a76d8faaa..ab7e7a00e5 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.txt +++ b/dts/Bindings/net/wireless/mediatek,mt76.txt @@ -25,6 +25,9 @@ Optional properties: - mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data - big-endian: if the radio eeprom partition is written in big-endian, specify this property +- mediatek,eeprom-merge-otp: Merge EEPROM data with OTP data. Can be used on + boards where the flash calibration data is generic and specific calibration + data should be pulled from the OTP ROM The MAC address can as well be set with corresponding optional properties defined in net/ethernet.txt. diff --git a/dts/Bindings/net/wireless/qcom,ath10k.txt b/dts/Bindings/net/wireless/qcom,ath10k.txt index 71bf91f973..65ee68efd5 100644 --- a/dts/Bindings/net/wireless/qcom,ath10k.txt +++ b/dts/Bindings/net/wireless/qcom,ath10k.txt @@ -96,6 +96,17 @@ Optional properties: - qcom,coexist-gpio-pin : gpio pin number information to support coex which will be used by wifi firmware. +* Subnodes +The ath10k wifi node can contain one optional firmware subnode. +Firmware subnode is needed when the platform does not have TustZone. +The firmware subnode must have: + +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + + Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -196,4 +207,7 @@ wifi@18000000 { memory-region = <&wifi_msa_mem>; iommus = <&apps_smmu 0x0040 0x1>; qcom,msa-fixed-perm; + wifi-firmware { + iommus = <&apps_iommu 0xc22 0x1>; + }; }; |