summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pci
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2017-01-10 08:26:15 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2017-01-10 08:48:45 +0100
commita40531fb3c11dc4ee8cca43c91b471da1fd3c1ab (patch)
tree35f886d87a77df7bac8a587a04647691db541a2e /dts/Bindings/pci
parent81462901ce3d677ce318150f7027e2ce1cf97c41 (diff)
downloadbarebox-a40531fb3c11dc4ee8cca43c91b471da1fd3c1ab.tar.gz
dts: update to v4.10-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pci')
-rw-r--r--dts/Bindings/pci/brcm,iproc-pcie.txt43
-rw-r--r--dts/Bindings/pci/layerscape-pci.txt1
-rw-r--r--dts/Bindings/pci/nvidia,tegra20-pcie.txt110
-rw-r--r--dts/Bindings/pci/pci.txt6
-rw-r--r--dts/Bindings/pci/qcom,pcie.txt14
-rw-r--r--dts/Bindings/pci/rcar-pci.txt1
6 files changed, 159 insertions, 16 deletions
diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt
index 01b88f4..b8e48b4 100644
--- a/dts/Bindings/pci/brcm,iproc-pcie.txt
+++ b/dts/Bindings/pci/brcm,iproc-pcie.txt
@@ -1,10 +1,17 @@
* Broadcom iProc PCIe controller with the platform bus interface
Required properties:
-- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc"
- for PAXC. PAXB-based root complex is used for external endpoint devices.
- PAXC-based root complex is connected to emulated endpoint devices
- internal to the ASIC
+- compatible:
+ "brcm,iproc-pcie" for the first generation of PAXB based controller,
+used in SoCs including NSP, Cygnus, NS2, and Pegasus
+ "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
+controllers, used in Stingray
+ "brcm,iproc-pcie-paxc" for the first generation of PAXC based
+controller, used in NS2
+ "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
+controller, used in Stingray
+ PAXB-based root complex is used for external endpoint devices. PAXC-based
+root complex is connected to emulated endpoint devices internal to the ASIC
- reg: base address and length of the PCIe controller I/O register space
- #interrupt-cells: set to <1>
- interrupt-map-mask and interrupt-map, standard PCI properties to define the
@@ -19,6 +26,10 @@ Required properties:
Optional properties:
- phys: phandle of the PCIe PHY device
- phy-names: must be "pcie-phy"
+- dma-coherent: present if DMA operations are coherent
+- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
+ by the ASIC after power on reset. In this case, SW is required to configure
+the mapping, based on inbound memory regions specified by this property.
- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
by the ASIC after power on reset. In this case, SW needs to configure it
@@ -29,11 +40,6 @@ effective:
Required:
- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
address used by the iProc PCIe core (not the PCIe address)
-- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB)
-
-Optional:
-- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
-increase the outbound window size
MSI support (optional):
@@ -41,10 +47,19 @@ For older platforms without MSI integrated in the GIC, iProc PCIe core provides
an event queue based MSI support. The iProc MSI uses host memories to store
MSI posted writes in the event queues
-- msi-parent: Link to the device node of the MSI controller. On newer iProc
-platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc
-platforms without MSI support in its interrupt controller, one may use the
-event queue based MSI support integrated within the iProc PCIe core.
+On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
+
+- msi-map: Maps a Requester ID to an MSI controller and associated MSI
+sideband data
+
+- msi-parent: Link to the device node of the MSI controller, used when no MSI
+sideband data is passed between the iProc PCIe controller and the MSI
+controller
+
+Refer to the following binding documents for more detailed description on
+the use of 'msi-map' and 'msi-parent':
+ Documentation/devicetree/bindings/pci/pci-msi.txt
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt
When the iProc event queue based MSI is used, one needs to define the
following properties in the MSI device node:
@@ -80,9 +95,7 @@ Example:
phy-names = "pcie-phy";
brcm,pcie-ob;
- brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x00000000>;
- brcm,pcie-ob-window-size = <256>;
msi-parent = <&msi0>;
diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt
index 41e9f55..ee1c72d 100644
--- a/dts/Bindings/pci/layerscape-pci.txt
+++ b/dts/Bindings/pci/layerscape-pci.txt
@@ -15,6 +15,7 @@ Required properties:
- compatible: should contain the platform identifier such as:
"fsl,ls1021a-pcie", "snps,dw-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
+ "fsl,ls1046a-pcie"
- reg: base addresses and lengths of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/dts/Bindings/pci/nvidia,tegra20-pcie.txt b/dts/Bindings/pci/nvidia,tegra20-pcie.txt
index b8cc395..982a74e 100644
--- a/dts/Bindings/pci/nvidia,tegra20-pcie.txt
+++ b/dts/Bindings/pci/nvidia,tegra20-pcie.txt
@@ -110,6 +110,20 @@ Power supplies for Tegra124:
- avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must
supply 1.05 V.
+Power supplies for Tegra210:
+- Required:
+ - avdd-pll-uerefe-supply: Power supply for PLLE (shared with USB3). Must
+ supply 1.05 V.
+ - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
+ clocks. Must supply 1.8 V.
+ - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - dvdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+ supply 1.05 V.
+ - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
+ Must supply 3.3 V.
+ - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+ supply 1.8 V.
+
Root ports are defined as subnodes of the PCIe controller node.
Required properties:
@@ -436,3 +450,99 @@ Board DTS:
status = "okay";
};
};
+
+Tegra210:
+---------
+
+SoC DTSI:
+
+ pcie-controller@01003000 {
+ compatible = "nvidia,tegra210-pcie";
+ device_type = "pci";
+ reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
+ 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
+ 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
+ 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
+ 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
+ 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+ clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+ <&tegra_car TEGRA210_CLK_AFI>,
+ <&tegra_car TEGRA210_CLK_PLL_E>,
+ <&tegra_car TEGRA210_CLK_CML0>;
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+Board DTS:
+
+ pcie-controller@01003000 {
+ status = "okay";
+
+ avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+ hvddio-pex-supply = <&vdd_1v8>;
+ dvddio-pex-supply = <&vdd_pex_1v05>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
+ vddio-pex-ctl-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+ phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+ status = "okay";
+ };
+
+ pci@2,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+ phy-names = "pcie-0";
+ status = "okay";
+ };
+ };
diff --git a/dts/Bindings/pci/pci.txt b/dts/Bindings/pci/pci.txt
index 08dcfad..50f9e2c 100644
--- a/dts/Bindings/pci/pci.txt
+++ b/dts/Bindings/pci/pci.txt
@@ -18,3 +18,9 @@ driver implementation may support the following properties:
host bridges in the system, otherwise potentially conflicting domain numbers
may be assigned to root buses behind different host bridges. The domain
number for each host bridge in the system must be unique.
+- max-link-speed:
+ If present this property specifies PCI gen for link capability. Host
+ drivers could add this as a strategy to avoid unnecessary operation for
+ unsupported link speed, for instance, trying to do training for
+ unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2'
+ for gen2, and '1' for gen1. Any other values are invalid.
diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt
index 4059a6f..e15f9b1 100644
--- a/dts/Bindings/pci/qcom,pcie.txt
+++ b/dts/Bindings/pci/qcom,pcie.txt
@@ -7,6 +7,7 @@
- "qcom,pcie-ipq8064" for ipq8064
- "qcom,pcie-apq8064" for apq8064
- "qcom,pcie-apq8084" for apq8084
+ - "qcom,pcie-msm8996" for msm8996 or apq8096
- reg:
Usage: required
@@ -92,6 +93,17 @@
- "aux" Auxiliary (AUX) clock
- "bus_master" Master AXI clock
- "bus_slave" Slave AXI clock
+
+- clock-names:
+ Usage: required for msm8996/apq8096
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "pipe" Pipe Clock driving internal logic
+ - "aux" Auxiliary (AUX) clock
+ - "cfg" Configuration clock
+ - "bus_master" Master AXI clock
+ - "bus_slave" Slave AXI clock
+
- resets:
Usage: required
Value type: <prop-encoded-array>
@@ -115,7 +127,7 @@
- "core" Core reset
- power-domains:
- Usage: required for apq8084
+ Usage: required for apq8084 and msm8996/apq8096
Value type: <prop-encoded-array>
Definition: A phandle and power domain specifier pair to the
power domain which is responsible for collapsing
diff --git a/dts/Bindings/pci/rcar-pci.txt b/dts/Bindings/pci/rcar-pci.txt
index 6cf9969..eee518d 100644
--- a/dts/Bindings/pci/rcar-pci.txt
+++ b/dts/Bindings/pci/rcar-pci.txt
@@ -7,6 +7,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7793" for the R8A7793 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
+ "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first