diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-08 07:35:17 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-12-10 08:48:40 +0100 |
commit | 6e6d9a2ff045f09d5a03e876becea5e6a1dabe90 (patch) | |
tree | bcf5e71df4472e374d03cc15ca22b4f841d9c73d /dts/Bindings/phy/qcom,usb-8x16-phy.txt | |
parent | 8e2fd5380a4fd7cee428513dc8eab068912b49f1 (diff) | |
download | barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.gz barebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.xz |
dts: update to v4.4-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/phy/qcom,usb-8x16-phy.txt')
-rw-r--r-- | dts/Bindings/phy/qcom,usb-8x16-phy.txt | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/dts/Bindings/phy/qcom,usb-8x16-phy.txt b/dts/Bindings/phy/qcom,usb-8x16-phy.txt new file mode 100644 index 0000000000..2cb2168cef --- /dev/null +++ b/dts/Bindings/phy/qcom,usb-8x16-phy.txt @@ -0,0 +1,76 @@ +Qualcomm's APQ8016/MSM8916 USB transceiver controller + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,usb-8x16-phy". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: USB PHY base address and length of the register map + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: See clock-bindings.txt section "consumers". List of + two clock specifiers for interface and core controller + clocks. + +- clock-names: + Usage: required + Value type: <string> + Definition: Must contain "iface" and "core" strings. + +- vddcx-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator VDCCX supply node. + +- v1p8-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator 1.8V supply node. + +- v3p3-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator 3.3V supply node. + +- resets: + Usage: required + Value type: <prop-encoded-array> + Definition: See reset.txt section "consumers". PHY reset specifier. + +- reset-names: + Usage: required + Value type: <string> + Definition: Must contain "phy" string. + +- switch-gpio: + Usage: optional + Value type: <prop-encoded-array> + Definition: Some boards are using Dual SPDT USB Switch, witch is + controlled by GPIO to de/multiplex D+/D- USB lines + between connectors. + +Example: + usb_phy: phy@78d9000 { + compatible = "qcom,usb-8x16-phy"; + reg = <0x78d9000 0x400>; + + vddcx-supply = <&pm8916_s1_corner>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + + resets = <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy"; + + // D+/D- lines: 1 - Routed to HUB, 0 - Device connector + switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + }; + |