dts: update to v5.16-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

8 files changed, 593 insertions, 114 deletions

diff --git a/dts/Bindings/phy/bcm-ns-usb2-phy.yaml b/dts/Bindings/phy/bcm-ns-usb2-phy.yaml
index 05b4dcd800..426101530a 100644
--- a/dts/Bindings/phy/bcm-ns-usb2-phy.yaml
+++ b/dts/Bindings/phy/bcm-ns-usb2-phy.yaml
@@ -18,13 +18,21 @@ properties:
     const: brcm,ns-usb2-phy
 
   reg:
-    items:
-      - description: iomem address range of DMU (Device Management Unit)
+    anyOf:
+      - maxItems: 1
+        description: PHY control register
+      - maxItems: 1
+        description: iomem address range of DMU (Device Management Unit)
+        deprecated: true
 
   reg-names:
     items:
       - const: dmu
 
+  brcm,syscon-clkset:
+    description: phandle to syscon for clkset register
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   clocks:
     items:
       - description: USB PHY reference clock
@@ -39,20 +47,25 @@ properties:
 required:
   - compatible
   - reg
-  - reg-names
   - clocks
   - clock-names
   - "#phy-cells"
 
+oneOf:
+  - required:
+      - brcm,syscon-clkset
+  - required:
+      - reg-names
+
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/bcm-nsp.h>
-    phy@1800c000 {
+    phy@1800c164 {
         compatible = "brcm,ns-usb2-phy";
-        reg = <0x1800c000 0x1000>;
-        reg-names = "dmu";
+        reg = <0x1800c164 0x4>;
+        brcm,syscon-clkset = <&clkset>;
         clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
         clock-names = "phy-ref-clk";
         #phy-cells = <0>;
diff --git a/dts/Bindings/phy/ingenic,phy-usb.yaml b/dts/Bindings/phy/ingenic,phy-usb.yaml
index 0fd93d71fe..5cab216486 100644
--- a/dts/Bindings/phy/ingenic,phy-usb.yaml
+++ b/dts/Bindings/phy/ingenic,phy-usb.yaml
@@ -46,7 +46,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     otg_phy: usb-phy@3c {
       compatible = "ingenic,jz4770-phy";
       reg = <0x3c 0x10>;
diff --git a/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt b/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt
deleted file mode 100644
index 1aa6f2674a..0000000000
--- a/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Tegra SOC USB PHY
-
-The device node for Tegra SOC USB PHY:
-
-Required properties :
- - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
-   For Tegra30, must contain "nvidia,tegra30-usb-phy".  Otherwise, must contain
-   "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
-   tegra114, tegra124, tegra132, or tegra210.
- - reg : Defines the following set of registers, in the order listed:
-   - The PHY's own register set.
-     Always present.
-   - The register set of the PHY containing the UTMI pad control registers.
-     Present if-and-only-if phy_type == utmi.
- - phy_type : Should be one of "utmi", "ulpi" or "hsic".
- - clocks : Defines the clocks listed in the clock-names property.
- - clock-names : The following clock names must be present:
-   - reg: The clock needed to access the PHY's own registers. This is the
-     associated EHCI controller's clock. Always present.
-   - pll_u: PLL_U. Always present.
-   - timer: The timeout clock (clk_m). Present if phy_type == utmi.
-   - utmi-pads: The clock needed to access the UTMI pad control registers.
-     Present if phy_type == utmi.
-   - ulpi-link: The clock Tegra provides to the ULPI PHY (usually pad DAP_MCLK2
-     with pad group aka "nvidia,pins" cdev2 and pin mux option config aka
-     "nvidia,function" pllp_out4).
-     Present if phy_type == ulpi, and ULPI link mode is in use.
- - resets : Must contain an entry for each entry in reset-names.
-   See ../reset/reset.txt for details.
- - reset-names : Must include the following entries:
-   - usb: The PHY's own reset signal.
-   - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
-     registers. Required even if phy_type == ulpi.
-
-Required properties for phy_type == ulpi:
-  - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
-
-Required PHY timing params for utmi phy, for all chips:
-  - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before
-    start of sync launches RxActive
-  - nvidia,elastic-limit : Variable FIFO Depth of elastic input store
-  - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait
-    before declare IDLE.
-  - nvidia,term-range-adj : Range adjusment on terminations
-  - Either one of the following for HS driver output control:
-    - nvidia,xcvr-setup : integer, uses the provided value.
-    - nvidia,xcvr-setup-use-fuses : boolean, indicates that the value is read
-      from the on-chip fuses
-    If both are provided, nvidia,xcvr-setup-use-fuses takes precedence.
-  - nvidia,xcvr-lsfslew : LS falling slew rate control.
-  - nvidia,xcvr-lsrslew :  LS rising slew rate control.
-
-Required PHY timing params for utmi phy, only on Tegra30 and above:
-  - nvidia,xcvr-hsslew : HS slew rate control.
-  - nvidia,hssquelch-level : HS squelch detector level.
-  - nvidia,hsdiscon-level : HS disconnect detector level.
-
-Optional properties:
-  - nvidia,has-legacy-mode : boolean indicates whether this controller can
-    operate in legacy mode (as APX 2500 / 2600). In legacy mode some
-    registers are accessed through the APB_MISC base address instead of
-    the USB controller.
-  - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
-    optimizations for the devices that are always connected. e.g. modem.
-  - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
-    "host", "peripheral", or "otg". Defaults to "host" if not defined.
-      host means this is a host controller
-      peripheral means it is device controller
-      otg means it can operate as either ("on the go")
-  - nvidia,has-utmi-pad-registers : boolean indicates whether this controller
-    contains the UTMI pad control registers common to all USB controllers.
-
-VBUS control (required for dr_mode == otg, optional for dr_mode == host):
-  - vbus-supply: regulator for VBUS
diff --git a/dts/Bindings/phy/nvidia,tegra20-usb-phy.yaml b/dts/Bindings/phy/nvidia,tegra20-usb-phy.yaml
new file mode 100644
index 0000000000..dfde0eaf66
--- /dev/null
+++ b/dts/Bindings/phy/nvidia,tegra20-usb-phy.yaml
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra20-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra USB PHY
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra124-usb-phy
+              - nvidia,tegra114-usb-phy
+          - enum:
+              - nvidia,tegra30-usb-phy
+      - items:
+          - enum:
+              - nvidia,tegra30-usb-phy
+              - nvidia,tegra20-usb-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      PHY0 and PHY2 share power and ground, PHY0 contains shared registers.
+      PHY0 and PHY2 must specify two register sets, where the first set is
+      PHY own registers and the second set is the PHY0 registers.
+
+  clocks:
+    anyOf:
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: ULPI PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI pads control registers clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI timeout clock
+          - description: UTMI pads control registers clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: reg
+          - const: pll_u
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: ulpi-link
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: utmi-pads
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: timer
+          - const: utmi-pads
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    oneOf:
+      - maxItems: 1
+        description: PHY reset
+
+      - items:
+          - description: PHY reset
+          - description: UTMI pads reset
+
+  reset-names:
+    oneOf:
+      - const: usb
+
+      - items:
+          - const: usb
+          - const: utmi-pads
+
+  "#phy-cells":
+    const: 0
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, ulpi, hsic]
+
+  dr_mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+    default: host
+
+  vbus-supply:
+    description: Regulator controlling USB VBUS.
+
+  nvidia,has-legacy-mode:
+    description: |
+      Indicates whether this controller can operate in legacy mode
+      (as APX 2500 / 2600). In legacy mode some registers are accessed
+      through the APB_MISC base address instead of the USB controller.
+    type: boolean
+
+  nvidia,is-wired:
+    description: |
+      Indicates whether we can do certain kind of power optimizations for
+      the devices that are always connected. e.g. modem.
+    type: boolean
+
+  nvidia,has-utmi-pad-registers:
+    description: |
+      Indicates whether this controller contains the UTMI pad control
+      registers common to all USB controllers.
+    type: boolean
+
+  nvidia,hssync-start-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles to wait before start of sync launches
+      RxActive.
+
+  nvidia,elastic-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Variable FIFO Depth of elastic input store.
+
+  nvidia,idle-wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles of idle to wait before declare IDLE.
+
+  nvidia,term-range-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description: Range adjustment on terminations.
+
+  nvidia,xcvr-setup:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 127
+    description: Input of XCVR cell, HS driver output control.
+
+  nvidia,xcvr-setup-use-fuses:
+    description: Indicates that the value is read from the on-chip fuses.
+    type: boolean
+
+  nvidia,xcvr-lsfslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS falling slew rate control.
+
+  nvidia,xcvr-lsrslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS rising slew rate control.
+
+  nvidia,xcvr-hsslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 511
+    description: HS slew rate control.
+
+  nvidia,hssquelch-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: HS squelch detector level.
+
+  nvidia,hsdiscon-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: HS disconnect detector level.
+
+  nvidia,phy-reset-gpio:
+    maxItems: 1
+    description: GPIO used to reset the PHY.
+
+  nvidia,pmc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to Power Management controller.
+          - description: USB controller ID.
+    description:
+      Phandle to Power Management controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+  - phy_type
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        phy_type:
+          const: utmi
+
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          maxItems: 2
+
+      required:
+        - nvidia,hssync-start-delay
+        - nvidia,elastic-limit
+        - nvidia,idle-wait-delay
+        - nvidia,term-range-adj
+        - nvidia,xcvr-lsfslew
+        - nvidia,xcvr-lsrslew
+
+      anyOf:
+        - required: ["nvidia,xcvr-setup"]
+        - required: ["nvidia,xcvr-setup-use-fuses"]
+
+      if:
+        properties:
+          compatible:
+            contains:
+              const: nvidia,tegra30-usb-phy
+
+      then:
+        properties:
+          clocks:
+            maxItems: 3
+
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: utmi-pads
+
+        required:
+          - nvidia,xcvr-hsslew
+          - nvidia,hssquelch-level
+          - nvidia,hsdiscon-level
+
+        else:
+          properties:
+            clocks:
+              maxItems: 4
+
+            clock-names:
+              items:
+                - const: reg
+                - const: pll_u
+                - const: timer
+                - const: utmi-pads
+
+  - if:
+      properties:
+        phy_type:
+          const: ulpi
+
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+          oneOf:
+            - items:
+                - const: reg
+                - const: pll_u
+
+            - items:
+                - const: reg
+                - const: pll_u
+                - const: ulpi-link
+
+        resets:
+          minItems: 1
+          maxItems: 2
+
+        reset-names:
+          minItems: 1
+          maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    usb-phy@7d008000 {
+        compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+        reg = <0x7d008000 0x4000>,
+              <0x7d000000 0x4000>;
+        interrupts = <0 97 4>;
+        phy_type = "utmi";
+        clocks = <&tegra_car TEGRA124_CLK_USB3>,
+                 <&tegra_car TEGRA124_CLK_PLL_U>,
+                 <&tegra_car TEGRA124_CLK_USBD>;
+        clock-names = "reg", "pll_u", "utmi-pads";
+        resets = <&tegra_car 59>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,hssync-start-delay = <0>;
+        nvidia,idle-wait-delay = <17>;
+        nvidia,elastic-limit = <16>;
+        nvidia,term-range-adj = <6>;
+        nvidia,xcvr-setup = <9>;
+        nvidia,xcvr-lsfslew = <0>;
+        nvidia,xcvr-lsrslew = <3>;
+        nvidia,hssquelch-level = <2>;
+        nvidia,hsdiscon-level = <5>;
+        nvidia,xcvr-hsslew = <12>;
+        nvidia,pmc = <&tegra_pmc 2>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    usb-phy@c5004000 {
+        compatible = "nvidia,tegra20-usb-phy";
+        reg = <0xc5004000 0x4000>;
+        interrupts = <0 21 4>;
+        phy_type = "ulpi";
+        clocks = <&tegra_car TEGRA20_CLK_USB2>,
+                 <&tegra_car TEGRA20_CLK_PLL_U>,
+                 <&tegra_car TEGRA20_CLK_CDEV2>;
+        clock-names = "reg", "pll_u", "ulpi-link";
+        resets = <&tegra_car 58>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,pmc = <&tegra_pmc 1>;
+    };
diff --git a/dts/Bindings/phy/phy-stm32-usbphyc.yaml b/dts/Bindings/phy/phy-stm32-usbphyc.yaml
index 3329f1d33a..267b695215 100644
--- a/dts/Bindings/phy/phy-stm32-usbphyc.yaml
+++ b/dts/Bindings/phy/phy-stm32-usbphyc.yaml
@@ -24,7 +24,7 @@ description:
   |_ UTMI switch_______|          OTG controller
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 properties:
   compatible:
@@ -81,6 +81,119 @@ patternProperties:
         properties:
           vbus-supply: true
 
+      # It can be necessary to adjust the PHY settings to compensate parasitics, which can be due
+      # to USB connector/receptacle, routing, ESD protection component,... Here is the list of
+      # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
+      # Speed, LS for Low-Speed)
+
+      st,current-boost-microamp:
+        description: Current boosting in uA
+        enum: [ 1000, 2000 ]
+
+      st,no-lsfs-fb-cap:
+        description: Disables the LS/FS feedback capacitor
+        type: boolean
+
+      st,decrease-hs-slew-rate:
+        description: Decreases the HS driver slew rate by 10%
+        type: boolean
+
+      st,tune-hs-dc-level:
+        description: |
+          Tunes the HS driver DC level
+          - <0> normal level
+          - <1> increases the level by 5 to 7 mV
+          - <2> increases the level by 10 to 14 mV
+          - <3> decreases the level by 5 to 7 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-fs-rftime-tuning:
+        description: Enables the FS rise/fall tuning option
+        type: boolean
+
+      st,enable-hs-rftime-reduction:
+        description: Enables the HS rise/fall reduction feature
+        type: boolean
+
+      st,trim-hs-current:
+        description: |
+          Controls HS driver current trimming for choke compensation
+          - <0> = 18.87 mA target current / nominal + 0%
+          - <1> = 19.165 mA target current / nominal + 1.56%
+          - <2> = 19.46 mA target current / nominal + 3.12%
+          - <3> = 19.755 mA target current / nominal + 4.68%
+          - <4> = 20.05 mA target current / nominal + 6.24%
+          - <5> = 20.345 mA target current / nominal + 7.8%
+          - <6> = 20.64 mA target current / nominal + 9.36%
+          - <7> = 20.935 mA target current / nominal + 10.92%
+          - <8> = 21.23 mA target current / nominal + 12.48%
+          - <9> = 21.525 mA target current / nominal + 14.04%
+          - <10> = 21.82 mA target current / nominal + 15.6%
+          - <11> = 22.115 mA target current / nominal + 17.16%
+          - <12> = 22.458 mA target current / nominal + 19.01%
+          - <13> = 22.755 mA target current / nominal + 20.58%
+          - <14> = 23.052 mA target current / nominal + 22.16%
+          - <15> = 23.348 mA target current / nominal + 23.73%
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      st,trim-hs-impedance:
+        description: |
+          Controls HS driver impedance tuning for choke compensation
+          - <0> = no impedance offset
+          - <1> = reduce the impedance by 2 ohms
+          - <2> = reduce the impedance by 4 ohms
+          - <3> = reduce the impedance by 6 ohms
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,tune-squelch-level:
+        description: |
+          Tunes the squelch DC threshold value
+          - <0> = no shift in threshold
+          - <1> = threshold shift by +7 mV
+          - <2> = threshold shift by -5 mV
+          - <3> = threshold shift by +14 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-hs-rx-gain-eq:
+        description: Enables the HS Rx gain equalizer
+        type: boolean
+
+      st,tune-hs-rx-offset:
+        description: |
+          Adjusts the HS Rx offset
+          - <0> = no offset
+          - <1> = offset of +5 mV
+          - <2> = offset of +10 mV
+          - <3> = offset of -5 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,no-hs-ftime-ctrl:
+        description: Disables the HS fall time control of single ended signals during pre-emphasis
+        type: boolean
+
+      st,no-lsfs-sc:
+        description: Disables the short circuit protection in LS/FS driver
+        type: boolean
+
+      st,enable-hs-tx-staggering:
+        description: Enables the basic staggering in HS Tx mode
+        type: boolean
+
     allOf:
       - if:
           properties:
@@ -137,6 +250,14 @@ examples:
             reg = <0>;
             phy-supply = <&vdd_usb>;
             #phy-cells = <0>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
             connector {
                 compatible = "usb-a-connector";
                 vbus-supply = <&vbus_sw>;
@@ -147,6 +268,14 @@ examples:
             reg = <1>;
             phy-supply = <&vdd_usb>;
             #phy-cells = <1>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
         };
     };
 ...
diff --git a/dts/Bindings/phy/qcom,qmp-phy.yaml b/dts/Bindings/phy/qcom,qmp-phy.yaml
index 75be5650a1..630ceaf915 100644
--- a/dts/Bindings/phy/qcom,qmp-phy.yaml
+++ b/dts/Bindings/phy/qcom,qmp-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QMP PHY controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Vinod Koul <vkoul@kernel.org>
 
 description:
   QMP phy controller supports physical layer functionality for a number of
@@ -27,6 +27,7 @@ properties:
       - qcom,msm8998-qmp-pcie-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-pcie-phy
       - qcom,sc8180x-qmp-ufs-phy
@@ -116,8 +117,6 @@ required:
   - clock-names
   - resets
   - reset-names
-  - vdda-phy-supply
-  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -150,6 +149,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -176,6 +178,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -204,6 +209,9 @@ allOf:
             - const: phy
             - const: common
             - const: cfg
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -233,6 +241,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -253,6 +264,9 @@ allOf:
         reset-names:
           items:
             - const: ufsphy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -278,34 +292,16 @@ allOf:
         reset-names:
           items:
             - const: ufsphy
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq8074-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: pipe clk.
-        clock-names:
-          items:
-            - const: pipe_clk
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
           contains:
             enum:
               - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
     then:
       properties:
         clocks:
@@ -356,6 +352,9 @@ allOf:
         reset-names:
           items:
             - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -387,6 +386,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -414,6 +416,38 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: phy_phy reset.
+            - description: reset of phy block.
+        reset-names:
+          items:
+            - const: phy_phy
+            - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
 
 examples:
   - |
diff --git a/dts/Bindings/phy/qcom,qusb2-phy.yaml b/dts/Bindings/phy/qcom,qusb2-phy.yaml
index ec9ccaaba0..aa2e409a1a 100644
--- a/dts/Bindings/phy/qcom,qusb2-phy.yaml
+++ b/dts/Bindings/phy/qcom,qusb2-phy.yaml
@@ -21,6 +21,7 @@ properties:
               - qcom,ipq8074-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
+              - qcom,qcm2290-qusb2-phy
               - qcom,sdm660-qusb2-phy
               - qcom,ipq6018-qusb2-phy
               - qcom,sm4250-qusb2-phy
@@ -50,6 +51,10 @@ properties:
       - const: ref
       - const: iface
 
+  vdd-supply:
+    description:
+      Phandle to 0.9V regulator supply to PHY digital circuit.
+
   vdda-pll-supply:
     description:
       Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -156,6 +161,7 @@ required:
   - "#phy-cells"
   - clocks
   - clock-names
+  - vdd-supply
   - vdda-pll-supply
   - vdda-phy-dpdm-supply
   - resets
@@ -174,6 +180,7 @@ examples:
                  <&gcc GCC_RX1_USB2_CLKREF_CLK>;
         clock-names = "cfg_ahb", "ref";
 
+        vdd-supply = <&pm8994_l28>;
         vdda-pll-supply = <&pm8994_l12>;
         vdda-phy-dpdm-supply = <&pm8994_l24>;
 
diff --git a/dts/Bindings/phy/rockchip-usb-phy.yaml b/dts/Bindings/phy/rockchip-usb-phy.yaml
index f0fc8275dc..499d55131a 100644
--- a/dts/Bindings/phy/rockchip-usb-phy.yaml
+++ b/dts/Bindings/phy/rockchip-usb-phy.yaml
@@ -11,13 +11,10 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - const: rockchip,rk3288-usb-phy
-      - items:
-          - enum:
-              - rockchip,rk3066a-usb-phy
-              - rockchip,rk3188-usb-phy
-          - const: rockchip,rk3288-usb-phy
+    enum:
+      - rockchip,rk3066a-usb-phy
+      - rockchip,rk3188-usb-phy
+      - rockchip,rk3288-usb-phy
 
   "#address-cells":
     const: 1