dts: update to v5.3-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 13 insertions, 3 deletions

diff --git a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt
index e70c79bbbc..cdec1eeb27 100644
--- a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt
@@ -40,6 +40,14 @@ MSM8998 platform.
 	Definition: must be 2. Specifying the pin number and flags, as defined
 		    in <dt-bindings/gpio/gpio.h>
 
+- gpio-ranges:
+	Usage: required
+	Definition:  see ../gpio/gpio.txt
+
+- gpio-reserved-ranges:
+	Usage: optional
+	Definition: see ../gpio/gpio.txt
+
 Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
 a general description of GPIO and interrupt bindings.
 
@@ -135,17 +143,17 @@ to specify in a pin configuration subnode:
 - bias-disable:
 	Usage: optional
 	Value type: <none>
-	Definition: The specified pins should be configued as no pull.
+	Definition: The specified pins should be configured as no pull.
 
 - bias-pull-down:
 	Usage: optional
 	Value type: <none>
-	Definition: The specified pins should be configued as pull down.
+	Definition: The specified pins should be configured as pull down.
 
 - bias-pull-up:
 	Usage: optional
 	Value type: <none>
-	Definition: The specified pins should be configued as pull up.
+	Definition: The specified pins should be configured as pull up.
 
 - output-high:
 	Usage: optional
@@ -175,6 +183,8 @@ Example:
 		interrupts = <0 208 0>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges = <&tlmm 0 0 175>;
+		gpio-reserved-ranges = <0 4>, <81 4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;