summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pinctrl
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2015-12-08 07:35:17 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2015-12-10 08:48:40 +0100
commit6e6d9a2ff045f09d5a03e876becea5e6a1dabe90 (patch)
treebcf5e71df4472e374d03cc15ca22b4f841d9c73d /dts/Bindings/pinctrl
parent8e2fd5380a4fd7cee428513dc8eab068912b49f1 (diff)
downloadbarebox-6e6d9a2ff045f09d5a03e876becea5e6a1dabe90.tar.gz
dts: update to v4.4-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/pinctrl')
-rw-r--r--dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt1
-rw-r--r--dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt90
-rw-r--r--dts/Bindings/pinctrl/berlin,pinctrl.txt5
-rw-r--r--dts/Bindings/pinctrl/brcm,cygnus-gpio.txt16
-rw-r--r--dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt63
-rw-r--r--dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt1
6 files changed, 169 insertions, 7 deletions
diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 3c821cd..b321b26 100644
--- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -17,6 +17,7 @@ Required properties:
"allwinner,sun8i-a23-pinctrl"
"allwinner,sun8i-a23-r-pinctrl"
"allwinner,sun8i-a33-pinctrl"
+ "allwinner,sun8i-a83t-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
diff --git a/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
new file mode 100644
index 0000000..61ac757
--- /dev/null
+++ b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -0,0 +1,90 @@
+* Atmel PIO4 Controller
+
+The Atmel PIO4 controller is used to select the function of a pin and to
+configure it.
+
+Required properties:
+- compatible: "atmel,sama5d2-pinctrl".
+- reg: base address and length of the PIO controller.
+- interrupts: interrupt outputs from the controller, one for each bank.
+- interrupt-controller: mark the device node as an interrupt controller.
+- #interrupt-cells: should be two.
+- gpio-controller: mark the device node as a gpio controller.
+- #gpio-cells: should be two.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+Each node (or subnode) will list the pins it needs and how to configured these
+pins.
+
+ node {
+ pinmux = <PIN_NUMBER_PINMUX>;
+ GENERIC_PINCONFIG;
+ };
+
+Required properties:
+- pinmux: integer array. Each integer represents a pin number plus mux and
+ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
+right representation of the pin.
+
+Optional properties:
+- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
+bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
+input-debounce, output-low, output-high.
+
+Example:
+
+#include <sama5d2-pinfunc.h>
+
+...
+{
+ pioA: pinctrl@fc038000 {
+ compatible = "atmel,sama5d2-pinctrl";
+ reg = <0xfc038000 0x600>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+ <68 IRQ_TYPE_LEVEL_HIGH 7>,
+ <69 IRQ_TYPE_LEVEL_HIGH 7>,
+ <70 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&pioA_clk>;
+
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PB0>,
+ <PIN_PB5>;
+ bias-pull-up;
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+ ...
+ };
+};
+...
diff --git a/dts/Bindings/pinctrl/berlin,pinctrl.txt b/dts/Bindings/pinctrl/berlin,pinctrl.txt
index a8bb5e2..f8fa28c 100644
--- a/dts/Bindings/pinctrl/berlin,pinctrl.txt
+++ b/dts/Bindings/pinctrl/berlin,pinctrl.txt
@@ -20,7 +20,10 @@ Required properties:
"marvell,berlin2cd-soc-pinctrl",
"marvell,berlin2cd-system-pinctrl",
"marvell,berlin2q-soc-pinctrl",
- "marvell,berlin2q-system-pinctrl"
+ "marvell,berlin2q-system-pinctrl",
+ "marvell,berlin4ct-avio-pinctrl",
+ "marvell,berlin4ct-soc-pinctrl",
+ "marvell,berlin4ct-system-pinctrl"
Required subnode-properties:
- groups: a list of strings describing the group names.
diff --git a/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt b/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
index 6540ca5..16589fb 100644
--- a/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
+++ b/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
@@ -3,8 +3,8 @@ Broadcom Cygnus GPIO/PINCONF Controller
Required properties:
- compatible:
- Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", or
- "brcm,cygnus-crmu-gpio"
+ Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio",
+ "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
- reg:
Define the base and range of the I/O address space that contains the Cygnus
@@ -26,9 +26,13 @@ Optional properties:
- interrupt-controller:
Specifies that the node is an interrupt controller
-- pinmux:
- Specifies the phandle to the IOMUX device, where pins can be individually
-muxed to GPIO
+- gpio-ranges:
+ Specifies the mapping between gpio controller and pin-controllers pins.
+ This requires 4 fields in cells defined as -
+ 1. Phandle of pin-controller.
+ 2. GPIO base pin offset.
+ 3 Pin-control base pin offset.
+ 4. number of gpio pins which are linearly mapped from pin base.
Supported generic PINCONF properties in child nodes:
@@ -78,6 +82,8 @@ Example:
gpio-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
+ gpio-ranges = <&pinctrl 0 42 1>,
+ <&pinctrl 1 44 3>;
};
/*
diff --git a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt
index 8bbf25d..457b2c6 100644
--- a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -1,16 +1,42 @@
* Freescale i.MX7 Dual IOMUX Controller
+iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar
+as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low
+power state retention capabilities on gpios that are part of iomuxc-lpsr
+(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for
+mux and pad control settings, it shares the input select register from main
+iomuxc controller for daisy chain settings, the fsl,input-sel property extends
+fsl,imx-pinctrl driver to support iomuxc-lpsr controller.
+
+iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+};
+
+iomuxc: iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+};
+
+Pheriparials using pads from iomuxc-lpsr support low state retention power
+state, under LPSR mode GPIO's state of pads are retain.
+
Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
and usage.
Required properties:
-- compatible: "fsl,imx7d-iomuxc"
+- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or
+ "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller.
- fsl,pins: each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is
the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual
Reference Manual for detailed CONFIG settings.
+- fsl,input-sel: required property for iomuxc-lpsr controller, this property is
+ a phandle for main iomuxc controller which shares the input select register for
+ daisy chain settings.
CONFIG bits definition:
PAD_CTL_PUS_100K_DOWN (0 << 5)
@@ -25,3 +51,38 @@ PAD_CTL_DSE_X1 (0 << 0)
PAD_CTL_DSE_X2 (1 << 0)
PAD_CTL_DSE_X3 (2 << 0)
PAD_CTL_DSE_X4 (3 << 0)
+
+Examples:
+While iomuxc-lpsr is intended to be used by dedicated peripherals to take
+advantages of LPSR power mode, is also possible that an IP to use pads from
+any of the iomux controllers. For example the I2C1 IP can use SCL pad from
+iomuxc-lpsr controller and SDA pad from iomuxc controller as:
+
+i2c1: i2c@30a20000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
+ status = "okay";
+};
+
+iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
+ >;
+ };
+};
+
+iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ >;
+ };
+};
diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
index 9496934..ffadb7a 100644
--- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -19,6 +19,7 @@ Required Properties:
- "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
- "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
- "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
+ - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
- "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
- reg: Base address and length of each memory resource used by the pin