dts: update to v6.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

14 files changed, 467 insertions, 44 deletions

diff --git a/dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml
new file mode 100644
index 0000000000..f559a2cfd8
--- /dev/null
+++ b/dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-shdwc
+      - atmel,at91sam9rl-shdwc
+      - atmel,at91sam9x5-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,wakeup-mode:
+    description: operation mode of the wakeup mode
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ none, high, low, any ]
+
+  atmel,wakeup-counter:
+    description: counter on wake-up 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9x5-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9260-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtc-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@fffffd10 {
+        compatible = "atmel,at91sam9260-shdwc";
+        reg = <0xfffffd10 0x10>;
+        clocks = <&clk32k>;
+    };
+
+...
diff --git a/dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml b/dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml
new file mode 100644
index 0000000000..8c58e12cdb
--- /dev/null
+++ b/dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,sama7g5-shdwc
+          - const: syscon
+      - enum:
+          - atmel,sama5d2-shdwc
+          - microchip,sam9x60-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  debounce-delay-us:
+    description:
+      Minimum wake-up inputs debouncer period in microseconds. It is usually a
+      board-related property.
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+patternProperties:
+  "^input@[0-15]$":
+    description:
+      Wake-up input nodes. These are usually described in the "board" part of
+      the Device Tree. Note also that input 0 is linked to the wake-up pin and
+      is frequently used.
+    type: object
+    properties:
+      reg:
+        description: contains the wake-up input index
+        minimum: 0
+        maximum: 15
+
+      atmel,wakeup-active-high:
+        description:
+          The corresponding wake-up input described by the child forces the
+          wake-up of the core power supply on a high level. The default is to
+          be active low.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@f8048010 {
+        compatible = "atmel,sama5d2-shdwc";
+        reg = <0xf8048010 0x10>;
+        clocks = <&clk32k>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,wakeup-rtc-timer;
+        debounce-delay-us = <976>;
+
+        input@0 {
+            reg = <0>;
+        };
+
+        input@1 {
+            reg = <1>;
+            atmel,wakeup-active-high;
+        };
+    };
+
+...
diff --git a/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt b/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt
deleted file mode 100644
index 93f31ca1ef..0000000000
--- a/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Broadcom Kona Family Reset Manager
-----------------------------------
-
-The reset manager is used on the Broadcom BCM21664 SoC.
-
-Required properties:
-  - compatible: brcm,bcm21664-resetmgr
-  - reg: memory address & range
-
-Example:
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
diff --git a/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml
new file mode 100644
index 0000000000..3e28a59d71
--- /dev/null
+++ b/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family reset manager
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm21664-resetmgr
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@35001f00 {
+        compatible = "brcm,bcm21664-resetmgr";
+        reg = <0x35001f00 0x24>;
+    };
+...
diff --git a/dts/Bindings/power/reset/nvmem-reboot-mode.txt b/dts/Bindings/power/reset/nvmem-reboot-mode.txt
deleted file mode 100644
index 752d6126d5..0000000000
--- a/dts/Bindings/power/reset/nvmem-reboot-mode.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-NVMEM reboot mode driver
-
-This driver gets reboot mode magic value from reboot-mode driver
-and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-Required properties:
-- compatible: should be "nvmem-reboot-mode".
-- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
-- nvmem-cell-names: Should be "reboot-mode".
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	reboot-mode {
-		compatible = "nvmem-reboot-mode";
-		nvmem-cells = <&reboot_mode>;
-		nvmem-cell-names = "reboot-mode";
-
-		mode-normal     = <0xAAAA5501>;
-		mode-bootloader = <0xBBBB5500>;
-		mode-recovery   = <0xCCCC5502>;
-		mode-test       = <0xDDDD5503>;
-	};
diff --git a/dts/Bindings/power/reset/nvmem-reboot-mode.yaml b/dts/Bindings/power/reset/nvmem-reboot-mode.yaml
new file mode 100644
index 0000000000..14a262bcbf
--- /dev/null
+++ b/dts/Bindings/power/reset/nvmem-reboot-mode.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic NVMEM reboot mode
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  This driver gets the reboot mode magic value from the reboot-mode driver
+  and stores it in the NVMEM cell named "reboot-mode". The bootloader can
+  then read it and take different action according to the value.
+
+properties:
+  compatible:
+    const: nvmem-reboot-mode
+
+  nvmem-cells:
+    description:
+      A phandle pointing to the nvmem-cells node where the vendor-specific
+      magic value representing the reboot mode is stored.
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: reboot-mode
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+required:
+  - compatible
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    reboot-mode {
+        compatible = "nvmem-reboot-mode";
+        nvmem-cells = <&reboot_reason>;
+        nvmem-cell-names = "reboot-mode";
+        mode-recovery = <0x01>;
+        mode-bootloader = <0x02>;
+    };
+...
diff --git a/dts/Bindings/power/reset/qcom,pon.yaml b/dts/Bindings/power/reset/qcom,pon.yaml
index d96170eecb..5e460128b0 100644
--- a/dts/Bindings/power/reset/qcom,pon.yaml
+++ b/dts/Bindings/power/reset/qcom,pon.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - qcom,pm8916-pon
+      - qcom,pm8941-pon
       - qcom,pms405-pon
       - qcom,pm8998-pon
       - qcom,pmk8350-pon
@@ -56,7 +57,6 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: reboot-mode.yaml#
   - if:
       properties:
         compatible:
@@ -66,12 +66,30 @@ allOf:
               - qcom,pms405-pon
               - qcom,pm8998-pon
     then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+    # Special case for pm8941, which doesn't store reset mode
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-pon
+    then:
       properties:
         reg:
           maxItems: 1
         reg-names:
           items:
             - const: pon
+
   - if:
       properties:
         compatible:
diff --git a/dts/Bindings/power/reset/restart-handler.yaml b/dts/Bindings/power/reset/restart-handler.yaml
index 1f9a2aac53..f2ffdd29d5 100644
--- a/dts/Bindings/power/reset/restart-handler.yaml
+++ b/dts/Bindings/power/reset/restart-handler.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Restart and shutdown handler generic binding
+title: Restart and shutdown handler Common Properties
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>
diff --git a/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml b/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml
index 11f1f98c1c..45792e2169 100644
--- a/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml
+++ b/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Zynq MPSoC Power Management
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   The zynqmp-power node describes the power management configurations.
diff --git a/dts/Bindings/power/supply/bq256xx.yaml b/dts/Bindings/power/supply/bq256xx.yaml
index 82f382a7ff..4fe9c37052 100644
--- a/dts/Bindings/power/supply/bq256xx.yaml
+++ b/dts/Bindings/power/supply/bq256xx.yaml
@@ -68,11 +68,29 @@ properties:
       Interrupt sends an active low, 256 μs pulse to host to report the charger
       device status and faults.
 
+  ti,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
 required:
   - compatible
   - reg
   - monitored-battery
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/power/supply/qcom,pmi8998-charger.yaml b/dts/Bindings/power/supply/qcom,pmi8998-charger.yaml
new file mode 100644
index 0000000000..277c47e048
--- /dev/null
+++ b/dts/Bindings/power/supply/qcom,pmi8998-charger.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-charger
+      - qcom,pm660-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: usb-plugin
+      - const: bat-ov
+      - const: wdog-bark
+      - const: usbin-icl-change
+
+  io-channels:
+    items:
+      - description: USB in current in uA
+      - description: USB in voltage in uV
+
+  io-channel-names:
+    items:
+      - const: usbin_i
+      - const: usbin_v
+
+  monitored-battery:
+    description: phandle to the simple-battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <4>;
+
+      charger@1000 {
+        compatible = "qcom,pmi8998-charger";
+        reg = <0x1000>;
+
+        interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
+                     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+        io-channels = <&pmi8998_rradc 3>,
+                      <&pmi8998_rradc 4>;
+        io-channel-names = "usbin_i",
+                           "usbin_v";
+
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/dts/Bindings/power/supply/richtek,rt5033-battery.yaml b/dts/Bindings/power/supply/richtek,rt5033-battery.yaml
index 756c16d172..b5d8888d03 100644
--- a/dts/Bindings/power/supply/richtek,rt5033-battery.yaml
+++ b/dts/Bindings/power/supply/richtek,rt5033-battery.yaml
@@ -26,7 +26,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/power/supply/richtek,rt5033-charger.yaml b/dts/Bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 0000000000..5b3edd79a5
--- /dev/null
+++ b/dts/Bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  The battery charger of the multifunction device RT5033 has to be instantiated
+  under sub-node named "charger" using the following format.
+
+properties:
+  compatible:
+    const: richtek,rt5033-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the monitored battery according to battery.yaml. The battery
+      node needs to contain five parameters.
+
+      precharge-current-microamp:
+      Current of pre-charge mode. The pre-charge current levels are 350 mA
+      to 650 mA programmed by I2C per 100 mA.
+
+      constant-charge-current-max-microamp:
+      Current of fast-charge mode. The fast-charge current levels are 700 mA
+      to 2000 mA programmed by I2C per 100 mA.
+
+      charge-term-current-microamp:
+      This property is end of charge current. Its level ranges from 150 mA
+      to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+      600 mA in 100 mA steps.
+
+      precharge-upper-limit-microvolt:
+      Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+      threshold voltage, the charger is in pre-charge mode with pre-charge
+      current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+      constant-charge-voltage-max-microvolt:
+      Battery regulation voltage of constant voltage mode. This voltage levels
+      from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+  richtek,usb-connector:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to a USB connector according to usb-connector.yaml. The connector
+      should be a child of the extcon device.
+
+required:
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    charger {
+        compatible = "richtek,rt5033-charger";
+        monitored-battery = <&battery>;
+        richtek,usb-connector = <&usb_con>;
+    };
diff --git a/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
index 3ce648dd91..34b7959d67 100644
--- a/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
+++ b/dts/Bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -22,6 +22,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - x-powers,axp192-usb-power-supply
           - x-powers,axp202-usb-power-supply
           - x-powers,axp221-usb-power-supply
           - x-powers,axp223-usb-power-supply