diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2018-11-07 09:48:28 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2018-11-08 08:57:14 +0100 |
commit | 646d1a09f05689a3a4781112a3b3e4747d0ba231 (patch) | |
tree | fe48ab82140e06e495051098fde1d97a4b1e56d5 /dts/Bindings/regulator/st,stpmic1-regulator.txt | |
parent | ebc406c1ab2be0e6002e1d8ccbc5c1377a882895 (diff) | |
download | barebox-646d1a09f05689a3a4781112a3b3e4747d0ba231.tar.gz barebox-646d1a09f05689a3a4781112a3b3e4747d0ba231.tar.xz |
dts: update to v4.20-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/regulator/st,stpmic1-regulator.txt')
-rw-r--r-- | dts/Bindings/regulator/st,stpmic1-regulator.txt | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/dts/Bindings/regulator/st,stpmic1-regulator.txt b/dts/Bindings/regulator/st,stpmic1-regulator.txt new file mode 100644 index 0000000000..a3f4762405 --- /dev/null +++ b/dts/Bindings/regulator/st,stpmic1-regulator.txt @@ -0,0 +1,68 @@ +STMicroelectronics STPMIC1 Voltage regulators + +Regulator Nodes are optional depending on needs. + +Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + +Switches are fixed voltage regulators with only enable/disable capability. + +Optional properties: +- st,mask-reset: mask reset for this regulator: the regulator configuration + is maintained during pmic reset. +- regulator-pull-down: enable high pull down + if not specified light pull down is used +- regulator-over-current-protection: + if set, all regulators are switched off in case of over-current detection + on this regulator, + if not set, the driver only sends an over-current event. +- interrupt-parent: phandle to the parent interrupt controller +- interrupts: index of current limit detection interrupt +- <regulator>-supply: phandle to the parent supply/regulator node + each regulator supply can be described except vref_ddr. + +Example: +regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + interrupts = <IT_CURLIM_BUCK1 0>; + interrupt-parent = <&pmic>; + st,mask-reset; + regulator-pull-down; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + interrupts = <IT_CURLIM_BUCK4 0>; + interrupt-parent = <&mypmic>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; +}; |