dts: update to v5.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 267 insertions, 60 deletions

diff --git a/dts/Bindings/regulator/richtek,rt6245-regulator.yaml b/dts/Bindings/regulator/richtek,rt6245-regulator.yaml
index 796ceac874..e983d0e70c 100644
--- a/dts/Bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/dts/Bindings/regulator/richtek,rt6245-regulator.yaml
@@ -77,7 +77,6 @@ examples:
 
       rt6245@34 {
         compatible = "richtek,rt6245";
-        status = "okay";
         reg = <0x34>;
         enable-gpios = <&gpio26 2 0>;
 
diff --git a/dts/Bindings/regulator/richtek,rtq2134-regulator.yaml b/dts/Bindings/regulator/richtek,rtq2134-regulator.yaml
new file mode 100644
index 0000000000..3f47e8e6c4
--- /dev/null
+++ b/dts/Bindings/regulator/richtek,rtq2134-regulator.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2134-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2134 SubPMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ2134 is a multi-phase, programmable power management IC that
+  integrates with four high efficient, synchronous step-down converter cores.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ2134-QA/DSQ2134-QA-01.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq2134
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck[1-3].
+
+        properties:
+          richtek,use-vsel-dvs:
+            type: boolean
+            description: |
+              If specified, buck will listen to 'vsel' pin for dvs config.
+              Else, use dvs0 voltage by default.
+
+          richtek,uv-shutdown:
+            type: boolean
+            description: |
+              If specified, use shutdown as UV action. Else, hiccup by default.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq2134@18 {
+        compatible = "richtek,rtq2134";
+        reg = <0x18>;
+
+        regulators {
+          buck1 {
+            regulator-name = "rtq2134-buck1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1850000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <550000>;
+              regulator-suspend-max-microvolt = <550000>;
+            };
+          };
+          buck2 {
+            regulator-name = "rtq2134-buck2";
+            regulator-min-microvolt = <1120000>;
+            regulator-max-microvolt = <1120000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <1120000>;
+              regulator-suspend-max-microvolt = <1120000>;
+            };
+          };
+          buck3 {
+            regulator-name = "rtq2134-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <600000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <600000>;
+              regulator-suspend-max-microvolt = <600000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml b/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml
new file mode 100644
index 0000000000..e6e5a9a7d9
--- /dev/null
+++ b/dts/Bindings/regulator/richtek,rtq6752-regulator.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq6752-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ6752 TFT LCD Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6752 is an I2C interface pgorammable power management IC. It includes
+  two synchronous boost converter for PAVDD, and one synchronous NAVDD
+  buck-boost. The device is suitable for automotive TFT-LCD panel.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq6752
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided, treat it as
+      external pull up.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(p|n)avdd$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for pavdd and navdd.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq6752@6b {
+        compatible = "richtek,rtq6752";
+        reg = <0x6b>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulators {
+          pavdd {
+            regulator-name = "rtq6752-pavdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+          navdd {
+            regulator-name = "rtq6752-navdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
diff --git a/dts/Bindings/regulator/socionext,uniphier-regulator.yaml b/dts/Bindings/regulator/socionext,uniphier-regulator.yaml
new file mode 100644
index 0000000000..861d5f3c79
--- /dev/null
+++ b/dts/Bindings/regulator/socionext,uniphier-regulator.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+  This regulator controls VBUS and belongs to USB3 glue layer. Before using
+  the regulator, it is necessary to control the clocks and resets to enable
+  this layer. These clocks and resets should be described in each property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+# USB3 Controller
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-regulator
+      - socionext,uniphier-pro5-usb3-regulator
+      - socionext,uniphier-pxs2-usb3-regulator
+      - socionext,uniphier-ld20-usb3-regulator
+      - socionext,uniphier-pxs3-usb3-regulator
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:          # for others
+          - const: link
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:
+          - const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_vbus0: regulators@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+    };
+
diff --git a/dts/Bindings/regulator/uniphier-regulator.txt b/dts/Bindings/regulator/uniphier-regulator.txt
deleted file mode 100644
index 94fd38b0d1..0000000000
--- a/dts/Bindings/regulator/uniphier-regulator.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Socionext UniPhier Regulator Controller
-
-This describes the devicetree bindings for regulator controller implemented
-on Socionext UniPhier SoCs.
-
-USB3 Controller
----------------
-
-This regulator controls VBUS and belongs to USB3 glue layer. Before using
-the regulator, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
-    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
-    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
-    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_vbus0: regulators@100 {
-			compatible = "socionext,uniphier-ld20-usb3-regulator";
-			reg = <0x100 0x10>;
-			clock-names = "link";
-			clocks = <&sys_clk 14>;
-			reset-names = "link";
-			resets = <&sys_rst 14>;
-		};
-
-		phy {
-			...
-			phy-supply = <&usb_vbus0>;
-		};
-		...
-	};
diff --git a/dts/Bindings/regulator/vqmmc-ipq4019-regulator.yaml b/dts/Bindings/regulator/vqmmc-ipq4019-regulator.yaml
index 6f45582c91..dd7a2f9263 100644
--- a/dts/Bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/dts/Bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -39,6 +39,5 @@ examples:
       regulator-min-microvolt = <1500000>;
       regulator-max-microvolt = <3000000>;
       regulator-always-on;
-      status = "disabled";
     };
 ...