diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2015-02-09 08:45:25 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2015-02-11 09:50:08 +0100 |
commit | ab001302c8e1718110bb8839c270d2caa817b214 (patch) | |
tree | f5ab4feb5242e548917c3536b8510080df9a4e8f /dts/Bindings/reset | |
parent | c937ef5d34ede89ae382cfe6d98ba366859a65af (diff) | |
download | barebox-ab001302c8e1718110bb8839c270d2caa817b214.tar.gz barebox-ab001302c8e1718110bb8839c270d2caa817b214.tar.xz |
dts: update to v3.19-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/reset')
-rw-r--r-- | dts/Bindings/reset/st,sti-picophyreset.txt | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/dts/Bindings/reset/st,sti-picophyreset.txt b/dts/Bindings/reset/st,sti-picophyreset.txt new file mode 100644 index 0000000000..54ae9f747e --- /dev/null +++ b/dts/Bindings/reset/st,sti-picophyreset.txt @@ -0,0 +1,42 @@ +STMicroelectronics STi family Sysconfig Picophy SoftReset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in +the STi family SoC system configuration registers. + +The actual action taken when softreset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers and after an assert/deassert sequence the hardware's previous state +may no longer be valid. + +Please refer to Documentation/devicetree/bindings/reset/reset.txt +for common reset controller binding usage. + +Required properties: +- compatible: Should be "st,stih407-picophyreset" +- #reset-cells: 1, see below + +Example: + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + +Specifying picophyreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the picophyreset device node and an +index specifying which channel to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +Example: + + usb2_picophy0: usbpicophy@0 { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; + +Macro definitions for the supported reset channels can be found in: +include/dt-bindings/reset-controller/stih407-resets.h |