dts: update to v4.7-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

10 files changed, 176 insertions, 14 deletions

diff --git a/dts/Bindings/sound/davinci-mcbsp.txt b/dts/Bindings/sound/davinci-mcbsp.txt
new file mode 100644
index 0000000000..55b53e1fd7
--- /dev/null
+++ b/dts/Bindings/sound/davinci-mcbsp.txt
@@ -0,0 +1,51 @@
+Texas Instruments DaVinci McBSP module
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
+audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
+
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+- compatible :
+        "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
+
+- reg : physical base address and length of the controller memory mapped
+        region(s).
+- reg-names : Should contain:
+        * "mpu" for the main registers (required).
+        * "dat" for the data FIFO (optional).
+
+- dmas: three element list of DMA controller phandles, DMA request line and
+	TC channel ordered triplets.
+- dma-names: identifier string for each DMA request line in the dmas property.
+	These strings correspond 1:1 with the ordered pairs in dmas. The dma
+	identifiers must be "rx" and "tx".
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+- interrupts : Interrupt numbers for McBSP
+- interrupt-names : Known interrupt names are "rx" and "tx"
+
+- pinctrl-0: Should specify pin control group used for this controller.
+- pinctrl-names: Should contain only one value - "default", for more details
+        please refer to pinctrl-bindings.txt
+
+Example (AM1808):
+~~~~~~~~~~~~~~~~~
+
+mcbsp0: mcbsp@1d10000 {
+	compatible = "ti,da850-mcbsp";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp0_pins>;
+
+	reg = 	<0x00110000 0x1000>,
+		<0x00310000 0x1000>;
+	reg-names = "mpu", "dat";
+	interrupts = <97 98>;
+	interrupts-names = "rx", "tx";
+	dmas = <&edma0 3 1
+		&edma0 2 1>;
+	dma-names = "tx", "rx";
+	status = "okay";
+};
diff --git a/dts/Bindings/sound/fsl-sai.txt b/dts/Bindings/sound/fsl-sai.txt
index 044e5d76e2..740b467adf 100644
--- a/dts/Bindings/sound/fsl-sai.txt
+++ b/dts/Bindings/sound/fsl-sai.txt
@@ -7,8 +7,8 @@ codec/DSP interfaces.
 
 Required properties:
 
-  - compatible		: Compatible list, contains "fsl,vf610-sai" or
-			  "fsl,imx6sx-sai".
+  - compatible		: Compatible list, contains "fsl,vf610-sai",
+			  "fsl,imx6sx-sai" or "fsl,imx6ul-sai"
 
   - reg			: Offset and length of the register set for the device.
 
@@ -48,6 +48,11 @@ Required properties:
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 
+Optional properties (for mx6ul):
+
+  - fsl,sai-mclk-direction-output: This is a boolean property. If present,
+			 indicates that SAI will output the SAI MCLK clock.
+
 Note:
 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
   default synchronous mode (sync Rx with Tx) will be used, which means both
diff --git a/dts/Bindings/sound/max98371.txt b/dts/Bindings/sound/max98371.txt
new file mode 100644
index 0000000000..6c285235e6
--- /dev/null
+++ b/dts/Bindings/sound/max98371.txt
@@ -0,0 +1,17 @@
+max98371 codec
+
+This device supports I2C mode only.
+
+Required properties:
+
+- compatible : "maxim,max98371"
+- reg : The chip select number on the I2C bus
+
+Example:
+
+&i2c {
+	max98371: max98371@0x31 {
+		compatible = "maxim,max98371";
+		reg = <0x31>;
+	};
+};
diff --git a/dts/Bindings/sound/mt8173-rt5650-rt5676.txt b/dts/Bindings/sound/mt8173-rt5650-rt5676.txt
index f205ce9e31..ac28cdb491 100644
--- a/dts/Bindings/sound/mt8173-rt5650-rt5676.txt
+++ b/dts/Bindings/sound/mt8173-rt5650-rt5676.txt
@@ -1,15 +1,16 @@
-MT8173 with RT5650 RT5676 CODECS
+MT8173 with RT5650 RT5676 CODECS and HDMI via I2S
 
 Required properties:
 - compatible : "mediatek,mt8173-rt5650-rt5676"
 - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+			and of the hdmi encoder node
 - mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650-rt5676";
-		mediatek,audio-codec = <&rt5650 &rt5676>;
+		mediatek,audio-codec = <&rt5650 &rt5676 &hdmi0>;
 		mediatek,platform = <&afe>;
 	};
 
diff --git a/dts/Bindings/sound/mt8173-rt5650.txt b/dts/Bindings/sound/mt8173-rt5650.txt
index fe5a5ef171..5bfa6b6053 100644
--- a/dts/Bindings/sound/mt8173-rt5650.txt
+++ b/dts/Bindings/sound/mt8173-rt5650.txt
@@ -5,11 +5,21 @@ Required properties:
 - mediatek,audio-codec: the phandles of rt5650 codecs
 - mediatek,platform: the phandle of MT8173 ASoC platform
 
+Optional subnodes:
+- codec-capture : the subnode of rt5650 codec capture
+Required codec-capture subnode properties:
+- sound-dai: audio codec dai name on capture path
+  <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1)
+  <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2)
+
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650";
 		mediatek,audio-codec = <&rt5650>;
 		mediatek,platform = <&afe>;
+		codec-capture {
+			sound-dai = <&rt5650 1>;
+		};
 	};
 
diff --git a/dts/Bindings/sound/nvidia,tegra30-hda.txt b/dts/Bindings/sound/nvidia,tegra30-hda.txt
index 275c6ea356..44d27456e8 100644
--- a/dts/Bindings/sound/nvidia,tegra30-hda.txt
+++ b/dts/Bindings/sound/nvidia,tegra30-hda.txt
@@ -15,7 +15,7 @@ Required properties:
 
 Example:
 
-hda@0,70030000 {
+hda@70030000 {
 	compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
 	reg = <0x0 0x70030000 0x0 0x10000>;
 	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/sound/pcm5102a.txt b/dts/Bindings/sound/pcm5102a.txt
new file mode 100644
index 0000000000..c63ab0b6ee
--- /dev/null
+++ b/dts/Bindings/sound/pcm5102a.txt
@@ -0,0 +1,13 @@
+PCM5102a audio CODECs
+
+These devices does not use I2C or SPI.
+
+Required properties:
+
+  - compatible : set as "ti,pcm5102a"
+
+Examples:
+
+	pcm5102a: pcm5102a {
+		compatible = "ti,pcm5102a";
+	};
diff --git a/dts/Bindings/sound/st,sti-asoc-card.txt b/dts/Bindings/sound/st,sti-asoc-card.txt
index 028fa1c82f..4d9a83d9a0 100644
--- a/dts/Bindings/sound/st,sti-asoc-card.txt
+++ b/dts/Bindings/sound/st,sti-asoc-card.txt
@@ -37,17 +37,18 @@ Required properties:
 
   - dai-name: DAI name that describes the IP.
 
+  - IP mode: IP working mode depending on associated codec.
+	"HDMI" connected to HDMI codec and support IEC HDMI formats (player only).
+	"SPDIF" connected to SPDIF codec and support SPDIF formats (player only).
+	"PCM" PCM standard mode for I2S or TDM bus.
+	"TDM" TDM mode for TDM bus.
+
 Required properties ("st,sti-uni-player" compatibility only):
   - clocks: CPU_DAI IP clock source, listed in the same order than the
 	    CPU_DAI properties.
 
   - uniperiph-id: internal SOC IP instance ID.
 
-  - IP mode: IP working mode depending on associated codec.
-	"HDMI" connected to HDMI codec IP and IEC HDMI formats.
-	"SPDIF"connected to SPDIF codec and support SPDIF formats.
-	"PCM"  PCM standard mode for I2S or TDM bus.
-
 Optional properties:
   - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
 	       external codecs connection.
@@ -56,6 +57,22 @@ Optional properties:
 
 Example:
 
+	sti_uni_player1: sti-uni-player@1 {
+		compatible = "st,sti-uni-player";
+		status = "okay";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+		reg = <0x8D81000 0x158>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 3 0 1>;
+		st,dai-name = "Uni Player #1 (I2S)";
+		dma-names = "tx";
+		st,uniperiph-id = <1>;
+		st,version = <5>;
+		st,mode = "TDM";
+	};
+
 	sti_uni_player2: sti-uni-player@2 {
 		compatible = "st,sti-uni-player";
 		status = "okay";
@@ -65,7 +82,7 @@ Example:
 		reg = <0x8D82000 0x158>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 4 0 1>;
-		dai-name = "Uni Player #1 (DAC)";
+		dai-name = "Uni Player #2 (DAC)";
 		dma-names = "tx";
 		uniperiph-id = <2>;
 		version = <5>;
@@ -82,7 +99,7 @@ Example:
 		interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 7 0 1>;
 		dma-names = "tx";
-		dai-name = "Uni Player #1 (PIO)";
+		dai-name = "Uni Player #3 (SPDIF)";
 		uniperiph-id = <3>;
 		version = <5>;
 		mode = "SPDIF";
@@ -99,6 +116,7 @@ Example:
 		dma-names = "rx";
 		dai-name = "Uni Reader #1 (HDMI RX)";
 		version = <3>;
+		st,mode = "PCM";
 	};
 
 2) sti-sas-codec: internal audio codec IPs driver
@@ -152,4 +170,20 @@ Example of audio card declaration:
 				sound-dai = <&sti_sasg_codec 0>;
 			};
 		};
+		simple-audio-card,dai-link@2 {
+			/* TDM playback  */
+			format = "left_j";
+			frame-inversion = <1>;
+			cpu {
+				sound-dai = <&sti_uni_player1>;
+				dai-tdm-slot-num = <16>;
+				dai-tdm-slot-width = <16>;
+				dai-tdm-slot-tx-mask =
+					<1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 3>;
+			};
+		};
 	};
diff --git a/dts/Bindings/sound/tas571x.txt b/dts/Bindings/sound/tas571x.txt
index 0ac31d8d5a..b4959f10b7 100644
--- a/dts/Bindings/sound/tas571x.txt
+++ b/dts/Bindings/sound/tas571x.txt
@@ -1,4 +1,4 @@
-Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers
+Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers
 
 The codec is controlled through an I2C interface.  It also has two other
 signals that can be wired up to GPIOs: reset (strongly recommended), and
@@ -6,7 +6,11 @@ powerdown (optional).
 
 Required properties:
 
-- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719"
+- compatible: should be one of the following:
+  - "ti,tas5711",
+  - "ti,tas5717",
+  - "ti,tas5719",
+  - "ti,tas5721"
 - reg: The I2C address of the device
 - #sound-dai-cells: must be equal to 0
 
@@ -25,6 +29,8 @@ Optional properties:
 - PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
 - PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
 - PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)
+- DRVDD-supply: regulator phandle for the DRVDD supply (5721)
+- PVDD-supply: regulator phandle for the PVDD supply (5721)
 
 Example:
 
diff --git a/dts/Bindings/sound/tas5720.txt b/dts/Bindings/sound/tas5720.txt
new file mode 100644
index 0000000000..806ea73814
--- /dev/null
+++ b/dts/Bindings/sound/tas5720.txt
@@ -0,0 +1,25 @@
+Texas Instruments TAS5720 Mono Audio amplifier
+
+The TAS5720 serial control bus communicates through the I2C protocol only. The
+serial bus is also used for periodic codec fault checking/reporting during
+audio playback. For more product information please see the links below:
+
+http://www.ti.com/product/TAS5720L
+http://www.ti.com/product/TAS5720M
+
+Required properties:
+
+- compatible : "ti,tas5720"
+- reg : I2C slave address
+- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry
+- pvdd-supply : phandle to a supply used for the Class-D amp and the analog
+
+Example:
+
+tas5720: tas5720@6c {
+	status = "okay";
+	compatible = "ti,tas5720";
+	reg = <0x6c>;
+	dvdd-supply = <&vdd_3v3_reg>;
+	pvdd-supply = <&amp_supply_reg>;
+};