diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2018-11-07 09:48:28 +0100 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2018-11-08 08:57:14 +0100 |
commit | 646d1a09f05689a3a4781112a3b3e4747d0ba231 (patch) | |
tree | fe48ab82140e06e495051098fde1d97a4b1e56d5 /dts/Bindings/thermal/qcom-spmi-temp-alarm.txt | |
parent | ebc406c1ab2be0e6002e1d8ccbc5c1377a882895 (diff) | |
download | barebox-646d1a09f05689a3a4781112a3b3e4747d0ba231.tar.gz barebox-646d1a09f05689a3a4781112a3b3e4747d0ba231.tar.xz |
dts: update to v4.20-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/thermal/qcom-spmi-temp-alarm.txt')
-rw-r--r-- | dts/Bindings/thermal/qcom-spmi-temp-alarm.txt | 16 |
1 files changed, 5 insertions, 11 deletions
diff --git a/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt b/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt index 290ec06fa3..0273a92a2a 100644 --- a/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt +++ b/dts/Bindings/thermal/qcom-spmi-temp-alarm.txt @@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature. Required properties: - compatible: Should contain "qcom,spmi-temp-alarm". -- reg: Specifies the SPMI address and length of the controller's - registers. +- reg: Specifies the SPMI address. - interrupts: PMIC temperature alarm interrupt. - #thermal-sensor-cells: Should be 0. See thermal.txt for a description. @@ -20,7 +19,7 @@ Example: pm8941_temp: thermal-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <0>; @@ -36,19 +35,14 @@ Example: thermal-sensors = <&pm8941_temp>; trips { - passive { - temperature = <1050000>; + stage1 { + temperature = <105000>; hysteresis = <2000>; type = "passive"; }; - alert { + stage2 { temperature = <125000>; hysteresis = <2000>; - type = "hot"; - }; - crit { - temperature = <145000>; - hysteresis = <2000>; type = "critical"; }; }; |