dts: update to v6.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 166 deletions

diff --git a/dts/src/arm/at91-wb45n.dtsi b/dts/src/arm/at91-wb45n.dtsi
deleted file mode 100644
index 430c753580..0000000000
--- a/dts/src/arm/at91-wb45n.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-wb45n.dtsi - Device Tree file for WB45NBT board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-
-#include "at91sam9g25.dtsi"
-
-/ {
-	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
-	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	atheros {
-		compatible = "atheros,ath6kl";
-		atheros,board-id = "SD32";
-	};
-};
-
-&reset_controller {
-	compatible = "atmel,sama5d3-rstc";
-};
-
-&shutdown_controller {
-	atmel,wakeup-mode = "low";
-};
-
-&slow_xtal {
-	clock-frequency = <32768>;
-};
-
-&main_xtal {
-	clock-frequency = <12000000>;
-};
-
-&ebi {
-	status = "okay";
-	nand_controller: nand-controller {
-		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				at91bootstrap@0 {
-					label = "at91bs";
-					reg = <0x0 0x20000>;
-				};
-
-				uboot@20000 {
-					label = "u-boot";
-					reg = <0x20000 0x80000>;
-				};
-
-				ubootenv@a0000 {
-					label = "u-boot-env";
-					reg = <0xa0000 0x20000>;
-				};
-
-				ubootenv@c0000 {
-					label = "redund-env";
-					reg = <0xc0000 0x20000>;
-				};
-
-				kernel-a@e0000 {
-					label = "kernel-a";
-					reg = <0xe0000 0x280000>;
-				};
-
-				kernel-b@360000 {
-					label = "kernel-b";
-					reg = <0x360000 0x280000>;
-				};
-
-				rootfs-a@5e0000 {
-					label = "rootfs-a";
-					reg = <0x5e0000 0x2600000>;
-				};
-
-				rootfs-b@2be0000 {
-					label = "rootfs-b";
-					reg = <0x2be0000 0x2600000>;
-				};
-
-				user@51e0000 {
-					label = "user";
-					reg = <0x51e0000 0x2dc0000>;
-				};
-
-				logs@7fa0000 {
-					label = "logs";
-					reg = <0x7fa0000 0x60000>;
-				};
-
-			};
-		};
-	};
-};
-
-&usb0 {
-	num-ports = <2>;
-	atmel,vbus-gpio = <
-		&pioB 12 GPIO_ACTIVE_HIGH
-		&pioA 31 GPIO_ACTIVE_HIGH
-		>;
-	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
-};
-
-&macb0 {
-	phy-mode = "rmii";
-};
-
-&spi0 {
-	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
-};
-
-&usb2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_board_usb2>;
-	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-&pinctrl {
-	usb2 {
-		pinctrl_board_usb2: usb2-board {
-			atmel,pins =
-				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
-		};
-	};
-};
-