dts: update to v6.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 519 deletions

diff --git a/dts/src/arm/imx6qdl-gw552x.dtsi b/dts/src/arm/imx6qdl-gw552x.dtsi
deleted file mode 100644
index 77ae611b81..0000000000
--- a/dts/src/arm/imx6qdl-gw552x.dtsi
+++ /dev/null
@@ -1,519 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pb {
-			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		user-pb1x {
-			label = "user_pb1x";
-			linux,code = <BTN_1>;
-			interrupt-parent = <&gsc>;
-			interrupts = <0>;
-		};
-
-		key-erased {
-			label = "key-erased";
-			linux,code = <BTN_2>;
-			interrupt-parent = <&gsc>;
-			interrupts = <1>;
-		};
-
-		eeprom-wp {
-			label = "eeprom_wp";
-			linux,code = <BTN_3>;
-			interrupt-parent = <&gsc>;
-			interrupts = <2>;
-		};
-
-		tamper {
-			label = "tamper";
-			linux,code = <BTN_4>;
-			interrupt-parent = <&gsc>;
-			interrupts = <5>;
-		};
-
-		switch-hold {
-			label = "switch_hold";
-			linux,code = <BTN_5>;
-			interrupt-parent = <&gsc>;
-			interrupts = <7>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: led-user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: led-user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: led-user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gsc: gsc@20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		#size-cells = <0>;
-
-		adc {
-			compatible = "gw,gsc-adc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			channel@0 {
-				gw,mode = <0>;
-				reg = <0x00>;
-				label = "temp";
-			};
-
-			channel@2 {
-				gw,mode = <1>;
-				reg = <0x02>;
-				label = "vdd_vin";
-			};
-
-			channel@5 {
-				gw,mode = <1>;
-				reg = <0x05>;
-				label = "vdd_3p3";
-			};
-
-			channel@8 {
-				gw,mode = <1>;
-				reg = <0x08>;
-				label = "vdd_bat";
-			};
-
-			channel@b {
-				gw,mode = <1>;
-				reg = <0x0b>;
-				label = "vdd_5p0";
-			};
-
-			channel@e {
-				gw,mode = <1>;
-				reg = <0xe>;
-				label = "vdd_arm";
-			};
-
-			channel@11 {
-				gw,mode = <1>;
-				reg = <0x11>;
-				label = "vdd_soc";
-			};
-
-			channel@14 {
-				gw,mode = <1>;
-				reg = <0x14>;
-				label = "vdd_3p0";
-			};
-
-			channel@17 {
-				gw,mode = <1>;
-				reg = <0x17>;
-				label = "vdd_1p5";
-			};
-
-			channel@1d {
-				gw,mode = <1>;
-				reg = <0x1d>;
-				label = "vdd_1p8";
-			};
-
-			channel@20 {
-				gw,mode = <1>;
-				reg = <0x20>;
-				label = "vdd_1p0";
-			};
-
-			channel@23 {
-				gw,mode = <1>;
-				reg = <0x23>;
-				label = "vdd_2p5";
-			};
-		};
-	};
-
-	gsc_gpio: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay"; };
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5p0v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};