dts: update to v6.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 110 deletions

diff --git a/dts/src/arm/kirkwood-dockstar.dts b/dts/src/arm/kirkwood-dockstar.dts
deleted file mode 100644
index 264938dfa4..0000000000
--- a/dts/src/arm/kirkwood-dockstar.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate FreeAgent Dockstar";
-	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led-orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x0500000 0xfb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88e1116";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};