dts: update to v6.5-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 122 deletions

diff --git a/dts/src/arm/kirkwood-openrd.dtsi b/dts/src/arm/kirkwood-openrd.dtsi
deleted file mode 100644
index 47f03c69c5..0000000000
--- a/dts/src/arm/kirkwood-openrd.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell OpenRD (Base|Client|Ultimate) Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
-			pinctrl-names = "default";
-
-			pmx_select28: pmx-select-rs232-rs485 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_select34: pmx-select-uart-sd {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			status = "okay";
-			cd-gpios = <&gpio0 29 9>;
-		};
-		gpio@10100 {
-			p28 {
-				gpio-hog;
-				gpios = <28 GPIO_ACTIVE_HIGH>;
-				/*
-				 * SelRS232or485 selects between RS-232 or RS-485
-				 * mode for the second UART.
-				 *
-				 * Low: RS-232
-				 * High: RS-485
-				 *
-				 * To use the second UART, you need to change also
-				 * the SelUARTorSD.
-				 */
-				output-low;
-				line-name = "SelRS232or485";
-			};
-		};
-		gpio@10140 {
-			p2 {
-				gpio-hog;
-				gpios = <2 GPIO_ACTIVE_HIGH>;
-				/*
-				 * SelUARTorSD selects between the second UART
-				 * (serial@12100) and SD (mvsdio@90000).
-				 *
-				 * Low: UART
-				 * High: SD
-				 *
-				 * When changing this line make sure the newly
-				 * selected device node is enabled and the
-				 * previously selected device node is disabled.
-				 */
-				output-high; /* Select SD by default */
-				line-name = "SelUARTorSD";
-			};
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "root";
-		reg = <0x0600000 0x1FA00000>;
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};