summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/sun6i-a31.dtsi
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2014-09-01 09:47:17 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2014-09-02 11:01:29 +0200
commita595ff6eea05b919567f96d71e7e2c7b6236b8ac (patch)
tree2d7cea529b6a06be744116e29e8a97b0c8de1981 /dts/src/arm/sun6i-a31.dtsi
parent7955f4315187665690f51e20698d4c12c68e008f (diff)
downloadbarebox-a595ff6eea05b919567f96d71e7e2c7b6236b8ac.tar.gz
dts: update to v3.17-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/src/arm/sun6i-a31.dtsi')
-rw-r--r--dts/src/arm/sun6i-a31.dtsi92
1 files changed, 90 insertions, 2 deletions
diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi
index a9dfa12..44b07e5 100644
--- a/dts/src/arm/sun6i-a31.dtsi
+++ b/dts/src/arm/sun6i-a31.dtsi
@@ -23,6 +23,7 @@
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
+ ethernet0 = &gmac;
};
@@ -281,6 +282,34 @@
"usb_ohci0", "usb_ohci1",
"usb_ohci2";
};
+
+ /*
+ * The following two are dummy clocks, placeholders used in the gmac_tx
+ * clock. The gmac driver will choose one parent depending on the PHY
+ * interface mode, using clk_set_rate auto-reparenting.
+ * The actual TX clock rate is not controlled by the gmac_tx clock.
+ */
+ mii_phy_tx_clk: clk@1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@01c200d0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c200d0 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
};
soc@01c00000 {
@@ -429,7 +458,7 @@
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
@@ -467,6 +496,48 @@
allwinner,drive = <2>;
allwinner,pull = <0>;
};
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA8", "PA9", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA26", "PA27";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_gmii_a: gmac_gmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA6", "PA7",
+ "PA8", "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA15",
+ "PA16", "PA17", "PA18", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in GMII mode run at 125MHz and
+ * might need a higher signal drive strength
+ */
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
ahb1_rst: reset@01c202c0 {
@@ -621,6 +692,23 @@
status = "disabled";
};
+ gmac: ethernet@01c30000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c30000 0x1054>;
+ interrupts = <0 82 4>;
+ interrupt-names = "macirq";
+ clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ resets = <&ahb1_rst 17>;
+ reset-names = "stmmaceth";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
@@ -756,7 +844,7 @@
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
};