dts: update to v5.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

7 files changed, 24 insertions, 731 deletions

diff --git a/dts/src/powerpc/fsl/sbc8641d.dts b/dts/src/powerpc/fsl/sbc8641d.dts
deleted file mode 100644
index 3dca10acc1..0000000000
--- a/dts/src/powerpc/fsl/sbc8641d.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8641D Device Tree Source
- *
- * Copyright 2008 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
- */
-
-/include/ "mpc8641si-pre.dtsi"
-
-/ {
-	model = "SBC8641D";
-	compatible = "wind,sbc8641";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512M at 0x0
-	};
-
-	lbc: localbus@f8005000 {
-		reg = <0xf8005000 0x1000>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
-			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
-			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
-			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
-			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
-			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "dtb";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@300000 {
-				label = "kernel";
-				reg = <0x00100000 0x00400000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "fs";
-				reg = <0x00500000 0x00a00000>;
-			};
-			partition@700000 {
-				label = "firmware";
-				reg = <0x00f00000 0x00100000>;
-				read-only;
-			};
-		};
-
-		epld@2,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <2 0 0x100000>;
-			ranges = <0 0 5 0 1	// User switches
-				  1 0 5 1 1	// Board ID/Rev
-				  3 0 5 3 1>;	// LEDs
-		};
-	};
-
-	soc: soc@f8000000 {
-		ranges = <0x00000000 0xf8000000 0x00100000>;
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@1f {
-				reg = <0x1f>;
-			};
-			phy1: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy2: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy3: ethernet-phy@2 {
-				reg = <2>;
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet2: ethernet@26000 {
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@26520 {
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet3: ethernet@27000 {
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@27520 {
-			tbi3: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-	};
-
-	pci0: pcie@f8008000 {
-		reg = <0xf8008000 0x1000>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		interrupt-map-mask = <0xff00 0 0 7>;
-
-		pcie@0 {
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-		};
-
-	};
-
-	pci1: pcie@f8009000 {
-		reg = <0xf8009000 0x1000>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
-
-		pcie@0 {
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-		};
-	};
-};
-
-/include/ "mpc8641si-post.dtsi"
diff --git a/dts/src/powerpc/microwatt.dts b/dts/src/powerpc/microwatt.dts
index 974abbdda2..65b270a90f 100644
--- a/dts/src/powerpc/microwatt.dts
+++ b/dts/src/powerpc/microwatt.dts
@@ -127,6 +127,18 @@
 			fifo-size = <16>;
 			interrupts = <0x10 0x1>;
 		};
+
+		ethernet@8020000 {
+			compatible = "litex,liteeth";
+			reg = <0x8021000 0x100
+				0x8020800 0x100
+				0x8030000 0x2000>;
+			reg-names = "mac", "mido", "buffer";
+			litex,rx-slots = <2>;
+			litex,tx-slots = <2>;
+			litex,slot-size = <0x800>;
+			interrupts = <0x11 0x1>;
+		};
 	};
 
 	chosen {
diff --git a/dts/src/powerpc/sbc8548-altflash.dts b/dts/src/powerpc/sbc8548-altflash.dts
deleted file mode 100644
index bb7a1e712b..0000000000
--- a/dts/src/powerpc/sbc8548-altflash.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Configured for booting off the alternate (64MB SODIMM) flash.
- * Requires switching JP12 jumpers and changing SW2.8 setting.
- *
- * Copyright 2013 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-
-/dts-v1/;
-
-/include/ "sbc8548-pre.dtsi"
-
-/{
-	localbus@e0000000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0xe0000000 0x5000>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0x0 0x0 0xfc000000 0x04000000		/*64MB Flash*/
-			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
-			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
-			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
-			  0x6 0x0 0xef800000 0x00800000>;	/*8MB Flash*/
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x0 0x0 0x04000000>;
-			compatible = "intel,JS28F128", "cfi-flash";
-			bank-width = <4>;
-			device-width = <1>;
-			partition@0 {
-				label = "space";
-				/* FC000000 -> FFEFFFFF */
-				reg = <0x00000000 0x03f00000>;
-			};
-			partition@3f00000 {
-				label = "bootloader";
-				/* FFF00000 -> FFFFFFFF */
-				reg = <0x03f00000 0x00100000>;
-				read-only;
-			};
-                };
-
-
-		epld@5,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x5 0x0 0x00b10000>;
-			ranges = <
-				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
-				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
-				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
-				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
-			>;
-
-			led@0,0 {
-				compatible = "led";
-				reg = <0x0 0x0 0x1fff>;
-			};
-
-			switches@1,0 {
-				compatible = "switches";
-				reg = <0x1 0x0 0x1fff>;
-			};
-
-			hw-rev@3,0 {
-				compatible = "hw-rev";
-				reg = <0x3 0x0 0x1fff>;
-			};
-
-			eeprom@b,0 {
-				compatible = "eeprom";
-				reg = <0xb 0 0x1fff>;
-			};
-
-		};
-
-		alt-flash@6,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "intel,JS28F640", "cfi-flash";
-			reg = <0x6 0x0 0x800000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				label = "space";
-				/* EF800000 -> EFF9FFFF */
-				reg = <0x00000000 0x007a0000>;
-			};
-			partition@7a0000 {
-				label = "bootloader";
-				/* EFFA0000 -> EFFFFFFF */
-				reg = <0x007a0000 0x00060000>;
-				read-only;
-			};
-		};
-
-
-        };
-};
-
-/include/ "sbc8548-post.dtsi"
diff --git a/dts/src/powerpc/sbc8548-post.dtsi b/dts/src/powerpc/sbc8548-post.dtsi
deleted file mode 100644
index 9d848d4094..0000000000
--- a/dts/src/powerpc/sbc8548-post.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-/{
-	soc8548@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x00000000 0xe0000000 0x00100000>;
-		bus-frequency = <0>;
-		compatible = "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <0x12 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <0x20>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <0x10 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@19 {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x6 0x1>;
-					reg = <0x19>;
-				};
-				phy1: ethernet-phy@1a {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x7 0x1>;
-					reg = <0x1a>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xfe>;
-			fsl,descriptor-types-mask = <0x12b0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x01 (PCI-X slot) @66MHz */
-			0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
-		clock-frequency = <66000000>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e000a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x0 (PEX) */
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <0x1a 0x2>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
-		clock-frequency = <33000000>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x10000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00800000>;
-		};
-	};
-};
diff --git a/dts/src/powerpc/sbc8548-pre.dtsi b/dts/src/powerpc/sbc8548-pre.dtsi
deleted file mode 100644
index 0e3665fd15..0000000000
--- a/dts/src/powerpc/sbc8548-pre.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-/{
-	model = "SBC8548";
-	compatible = "SBC8548";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-};
diff --git a/dts/src/powerpc/sbc8548.dts b/dts/src/powerpc/sbc8548.dts
deleted file mode 100644
index ce0a119f49..0000000000
--- a/dts/src/powerpc/sbc8548.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- */
-
-
-/dts-v1/;
-
-/include/ "sbc8548-pre.dtsi"
-
-/{
-	localbus@e0000000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0xe0000000 0x5000>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0x0 0x0 0xff800000 0x00800000		/*8MB Flash*/
-			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
-			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
-			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
-			  0x6 0x0 0xec000000 0x04000000>;	/*64MB Flash*/
-
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "intel,JS28F640", "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				label = "space";
-				/* FF800000 -> FFF9FFFF */
-				reg = <0x00000000 0x007a0000>;
-			};
-			partition@7a0000 {
-				label = "bootloader";
-				/* FFFA0000 -> FFFFFFFF */
-				reg = <0x007a0000 0x00060000>;
-				read-only;
-			};
-		};
-
-		epld@5,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x5 0x0 0x00b10000>;
-			ranges = <
-				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
-				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
-				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
-				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
-			>;
-
-			led@0,0 {
-				compatible = "led";
-				reg = <0x0 0x0 0x1fff>;
-			};
-
-			switches@1,0 {
-				compatible = "switches";
-				reg = <0x1 0x0 0x1fff>;
-			};
-
-			hw-rev@3,0 {
-				compatible = "hw-rev";
-				reg = <0x3 0x0 0x1fff>;
-			};
-
-			eeprom@b,0 {
-				compatible = "eeprom";
-				reg = <0xb 0 0x1fff>;
-			};
-
-		};
-
-		alt-flash@6,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x6 0x0 0x04000000>;
-			compatible = "intel,JS28F128", "cfi-flash";
-			bank-width = <4>;
-			device-width = <1>;
-			partition@0 {
-				label = "space";
-				/* EC000000 -> EFEFFFFF */
-				reg = <0x00000000 0x03f00000>;
-			};
-			partition@3f00000 {
-				label = "bootloader";
-				/* EFF00000 -> EFFFFFFF */
-				reg = <0x03f00000 0x00100000>;
-				read-only;
-			};
-                };
-        };
-};
-
-/include/ "sbc8548-post.dtsi"
diff --git a/dts/src/powerpc/wii.dts b/dts/src/powerpc/wii.dts
index aaa381da19..e9c945b123 100644
--- a/dts/src/powerpc/wii.dts
+++ b/dts/src/powerpc/wii.dts
@@ -216,7 +216,18 @@
 
 		control@d800100 {
 			compatible = "nintendo,hollywood-control";
-			reg = <0x0d800100 0x300>;
+			/*
+			 * Both the address and length are wrong, according to
+			 * Wiibrew this should be <0x0d800000 0x400>, but it
+			 * requires refactoring the PIC1, GPIO and OTP nodes
+			 * before changing that.
+			 */
+			reg = <0x0d800100 0xa0>;
+		};
+
+		otp@d8001ec {
+			compatible = "nintendo,hollywood-otp";
+			reg = <0x0d8001ec 0x8>;
 		};
 
 		disk@d806000 {