diff options
| -rw-r--r-- | arch/arm/mach-samsung/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-samsung/generic.c | 117 | ||||
| -rw-r--r-- | arch/arm/mach-samsung/include/mach/s3c-clocks.h | 31 | ||||
| -rw-r--r-- | arch/arm/mach-samsung/include/mach/s3c-generic.h | 12 | ||||
| -rw-r--r-- | arch/arm/mach-samsung/include/mach/s3c-iomap.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-samsung/lowlevel-init.S | 2 | ||||
| -rw-r--r-- | arch/arm/mach-samsung/s3c24xx-clocks.c | 137 | ||||
| -rw-r--r-- | drivers/mci/s3c.c | 10 | ||||
| -rw-r--r-- | drivers/serial/serial_s3c24x0.c | 2 | ||||
| -rw-r--r-- | drivers/video/s3c24xx.c | 4 |
10 files changed, 187 insertions, 141 deletions
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile index f329cdbdae..c590180958 100644 --- a/arch/arm/mach-samsung/Makefile +++ b/arch/arm/mach-samsung/Makefile @@ -1,3 +1,3 @@ obj-y += generic.o -obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o +obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o s3c24xx-clocks.o obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c index 3c24b1aa35..3f6e8014c8 100644 --- a/arch/arm/mach-samsung/generic.c +++ b/arch/arm/mach-samsung/generic.c @@ -28,100 +28,7 @@ #include <clock.h> #include <io.h> #include <mach/s3c-iomap.h> - -/** - * Calculate the current M-PLL clock. - * @return Current frequency in Hz - */ -uint32_t s3c24xx_get_mpllclk(void) -{ - uint32_t m, p, s, reg_val; - - reg_val = readl(MPLLCON); - m = ((reg_val & 0xFF000) >> 12) + 8; - p = ((reg_val & 0x003F0) >> 4) + 2; - s = reg_val & 0x3; -#ifdef CONFIG_CPU_S3C2410 - return (S3C24XX_CLOCK_REFERENCE * m) / (p << s); -#endif -#ifdef CONFIG_CPU_S3C2440 - return 2 * m * (S3C24XX_CLOCK_REFERENCE / (p << s)); -#endif -} - -/** - * Calculate the current U-PLL clock - * @return Current frequency in Hz - */ -uint32_t s3c24xx_get_upllclk(void) -{ - uint32_t m, p, s, reg_val; - - reg_val = readl(UPLLCON); - m = ((reg_val & 0xFF000) >> 12) + 8; - p = ((reg_val & 0x003F0) >> 4) + 2; - s = reg_val & 0x3; - - return (S3C24XX_CLOCK_REFERENCE * m) / (p << s); -} - -/** - * Calculate the FCLK frequency used for the ARM CPU core - * @return Current frequency in Hz - */ -uint32_t s3c24xx_get_fclk(void) -{ - return s3c24xx_get_mpllclk(); -} - -/** - * Calculate the HCLK frequency used for the AHB bus (CPU to main peripheral) - * @return Current frequency in Hz - */ -uint32_t s3c24xx_get_hclk(void) -{ - uint32_t f_clk; - - f_clk = s3c24xx_get_fclk(); -#ifdef CONFIG_CPU_S3C2410 - if (readl(CLKDIVN) & 0x02) - return f_clk >> 1; -#endif -#ifdef CONFIG_CPU_S3C2440 - switch(readl(CLKDIVN) & 0x06) { - case 2: - return f_clk >> 1; - case 4: - return f_clk >> 2; /* TODO consider CAMDIVN */ - case 6: - return f_clk / 3; /* TODO consider CAMDIVN */ - } -#endif - return f_clk; -} - -/** - * Calculate the PCLK frequency used for the slower peripherals - * @return Current frequency in Hz - */ -uint32_t s3c24xx_get_pclk(void) -{ - uint32_t p_clk; - - p_clk = s3c24xx_get_hclk(); - if (readl(CLKDIVN) & 0x01) - return p_clk >> 1; - return p_clk; -} - -/** - * Calculate the UCLK frequency used by the USB host device - * @return Current frequency in Hz - */ -uint32_t s3c24xx_get_uclk(void) -{ - return s3c24xx_get_upllclk(); -} +#include <mach/s3c-generic.h> /** * Calculate the amount of connected and available memory @@ -169,26 +76,6 @@ uint32_t s3c24x0_get_memory_size(void) return size; } -/** - * Show the user the current clock settings - */ -int s3c24xx_dump_clocks(void) -{ - printf("refclk: %7d kHz\n", S3C24XX_CLOCK_REFERENCE / 1000); - printf("mpll: %7d kHz\n", s3c24xx_get_mpllclk() / 1000); - printf("upll: %7d kHz\n", s3c24xx_get_upllclk() / 1000); - printf("fclk: %7d kHz\n", s3c24xx_get_fclk() / 1000); - printf("hclk: %7d kHz\n", s3c24xx_get_hclk() / 1000); - printf("pclk: %7d kHz\n", s3c24xx_get_pclk() / 1000); - printf("SDRAM1: CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c24xx_get_hclk() / 1000000); - if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15)) - printf("SDRAM2: CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2, - s3c24xx_get_hclk() / 1000000); - return 0; -} - -late_initcall(s3c24xx_dump_clocks); - static uint64_t s3c24xx_clocksource_read(void) { /* note: its a down counter */ @@ -203,7 +90,7 @@ static struct clocksource cs = { static int clocksource_init (void) { - uint32_t p_clk = s3c24xx_get_pclk(); + uint32_t p_clk = s3c_get_pclk(); writel(0x00000000, TCON); /* stop all timers */ writel(0x00ffffff, TCFG0); /* PCLK / (255 + 1) for timer 4 */ diff --git a/arch/arm/mach-samsung/include/mach/s3c-clocks.h b/arch/arm/mach-samsung/include/mach/s3c-clocks.h new file mode 100644 index 0000000000..44b2a6c8ee --- /dev/null +++ b/arch/arm/mach-samsung/include/mach/s3c-clocks.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2011 Juergen Beisert, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_S3C_CLOCKS_H +# define __MACH_S3C_CLOCKS_H + +#ifdef CONFIG_ARCH_S3C24xx +# define S3C_LOCKTIME (S3C_CLOCK_POWER_BASE) +# define S3C_MPLLCON (S3C_CLOCK_POWER_BASE + 0x4) +# define S3C_UPLLCON (S3C_CLOCK_POWER_BASE + 0x8) +# define S3C_CLKCON (S3C_CLOCK_POWER_BASE + 0xc) +# define S3C_CLKSLOW (S3C_CLOCK_POWER_BASE + 0x10) +# define S3C_CLKDIVN (S3C_CLOCK_POWER_BASE + 0x14) + +# define S3C_MPLLCON_GET_MDIV(x) ((((x) >> 12) & 0xff) + 8) +# define S3C_MPLLCON_GET_PDIV(x) ((((x) >> 4) & 0x3f) + 2) +# define S3C_MPLLCON_GET_SDIV(x) ((x) & 0x3) +#endif + +#endif /* __MACH_S3C_CLOCKS_H */ diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h index b8abcf1d9c..33f025d894 100644 --- a/arch/arm/mach-samsung/include/mach/s3c-generic.h +++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h @@ -24,10 +24,10 @@ * MA 02111-1307 USA */ -uint32_t s3c24xx_get_mpllclk(void); -uint32_t s3c24xx_get_upllclk(void); -uint32_t s3c24xx_get_fclk(void); -uint32_t s3c24xx_get_hclk(void); -uint32_t s3c24xx_get_pclk(void); -uint32_t s3c24xx_get_uclk(void); +uint32_t s3c_get_mpllclk(void); +uint32_t s3c_get_upllclk(void); +uint32_t s3c_get_fclk(void); +uint32_t s3c_get_hclk(void); +uint32_t s3c_get_pclk(void); +uint32_t s3c_get_uclk(void); uint32_t s3c24x0_get_memory_size(void); diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h index a990d80c4a..7cedf6a9f8 100644 --- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h +++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h @@ -25,7 +25,7 @@ #define S3C2410_USB_HOST_BASE 0x49000000 #define S3C2410_INTERRUPT_BASE 0x4A000000 #define S3C2410_DMA_BASE 0x4B000000 -#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 +#define S3C_CLOCK_POWER_BASE 0x4C000000 #define S3C2410_LCD_BASE 0x4D000000 #define S3C24X0_NAND_BASE 0x4E000000 #define S3C24X0_UART_BASE 0x50000000 @@ -40,15 +40,6 @@ #define S3C2410_SPI_BASE 0x59000000 #define S3C2410_SDI_BASE 0x5A000000 -/* Clock control (direct access) */ - -#define LOCKTIME (S3C24X0_CLOCK_POWER_BASE) -#define MPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x4) -#define UPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x8) -#define CLKCON (S3C24X0_CLOCK_POWER_BASE + 0xc) -#define CLKSLOW (S3C24X0_CLOCK_POWER_BASE + 0x10) -#define CLKDIVN (S3C24X0_CLOCK_POWER_BASE + 0x14) - /* Timer (direct access) */ #define TCFG0 (S3C24X0_TIMER_BASE + 0x00) #define TCFG1 (S3C24X0_TIMER_BASE + 0x04) diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S index 852928393b..e2e3fc0927 100644 --- a/arch/arm/mach-samsung/lowlevel-init.S +++ b/arch/arm/mach-samsung/lowlevel-init.S @@ -77,7 +77,7 @@ routine very early in your board_init_lowlevel routine. .globl s3c24x0_pll_init s3c24x0_pll_init: - mov r0, #S3C24X0_CLOCK_POWER_BASE + mov r0, #S3C_CLOCK_POWER_BASE /* configure internal clock ratio */ mov r1, #BOARD_SPECIFIC_CLKDIVN diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c new file mode 100644 index 0000000000..beacc763b4 --- /dev/null +++ b/arch/arm/mach-samsung/s3c24xx-clocks.c @@ -0,0 +1,137 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <config.h> +#include <common.h> +#include <init.h> +#include <clock.h> +#include <io.h> +#include <mach/s3c-iomap.h> +#include <mach/s3c-generic.h> +#include <mach/s3c-clocks.h> + +/** + * Calculate the current M-PLL clock. + * @return Current frequency in Hz + */ +uint32_t s3c_get_mpllclk(void) +{ + uint32_t m, p, s, reg_val; + + reg_val = readl(S3C_MPLLCON); + m = ((reg_val & 0xFF000) >> 12) + 8; + p = ((reg_val & 0x003F0) >> 4) + 2; + s = reg_val & 0x3; +#ifdef CONFIG_CPU_S3C2410 + return (S3C24XX_CLOCK_REFERENCE * m) / (p << s); +#endif +#ifdef CONFIG_CPU_S3C2440 + return 2 * m * (S3C24XX_CLOCK_REFERENCE / (p << s)); +#endif +} + +/** + * Calculate the current U-PLL clock + * @return Current frequency in Hz + */ +uint32_t s3c_get_upllclk(void) +{ + uint32_t m, p, s, reg_val; + + reg_val = readl(S3C_UPLLCON); + m = ((reg_val & 0xFF000) >> 12) + 8; + p = ((reg_val & 0x003F0) >> 4) + 2; + s = reg_val & 0x3; + + return (S3C24XX_CLOCK_REFERENCE * m) / (p << s); +} + +/** + * Calculate the FCLK frequency used for the ARM CPU core + * @return Current frequency in Hz + */ +uint32_t s3c_get_fclk(void) +{ + return s3c_get_mpllclk(); +} + +/** + * Calculate the HCLK frequency used for the AHB bus (CPU to main peripheral) + * @return Current frequency in Hz + */ +uint32_t s3c_get_hclk(void) +{ + uint32_t f_clk; + + f_clk = s3c_get_fclk(); +#ifdef CONFIG_CPU_S3C2410 + if (readl(S3C_CLKDIVN) & 0x02) + return f_clk >> 1; +#endif +#ifdef CONFIG_CPU_S3C2440 + switch(readl(S3C_CLKDIVN) & 0x06) { + case 2: + return f_clk >> 1; + case 4: + return f_clk >> 2; /* TODO consider CAMDIVN */ + case 6: + return f_clk / 3; /* TODO consider CAMDIVN */ + } +#endif + return f_clk; +} + +/** + * Calculate the PCLK frequency used for the slower peripherals + * @return Current frequency in Hz + */ +uint32_t s3c_get_pclk(void) +{ + uint32_t p_clk; + + p_clk = s3c_get_hclk(); + if (readl(S3C_CLKDIVN) & 0x01) + return p_clk >> 1; + return p_clk; +} + +/** + * Calculate the UCLK frequency used by the USB host device + * @return Current frequency in Hz + */ +uint32_t s3c24_get_uclk(void) +{ + return s3c_get_upllclk(); +} + +/** + * Show the user the current clock settings + */ +int s3c24xx_dump_clocks(void) +{ + printf("refclk: %7d kHz\n", S3C24XX_CLOCK_REFERENCE / 1000); + printf("mpll: %7d kHz\n", s3c_get_mpllclk() / 1000); + printf("upll: %7d kHz\n", s3c_get_upllclk() / 1000); + printf("fclk: %7d kHz\n", s3c_get_fclk() / 1000); + printf("hclk: %7d kHz\n", s3c_get_hclk() / 1000); + printf("pclk: %7d kHz\n", s3c_get_pclk() / 1000); + printf("SDRAM1: CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c_get_hclk() / 1000000); + if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15)) + printf("SDRAM2: CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2, + s3c_get_hclk() / 1000000); + return 0; +} + +late_initcall(s3c24xx_dump_clocks); diff --git a/drivers/mci/s3c.c b/drivers/mci/s3c.c index 12d2c03ba9..7babab45f1 100644 --- a/drivers/mci/s3c.c +++ b/drivers/mci/s3c.c @@ -191,7 +191,7 @@ static unsigned s3c_setup_clock_speed(struct device_d *hw_dev, unsigned nc) if (nc == 0) return 0; - clock = s3c24xx_get_pclk(); + clock = s3c_get_pclk(); /* Calculate the required prescaler value to get the requested frequency */ mci_psc = (clock + (nc >> 2)) / nc; @@ -760,8 +760,8 @@ static int s3c_mci_probe(struct device_d *hw_dev) struct s3c_mci_platform_data *pd = hw_dev->platform_data; /* TODO replace by the global func: enable the SDI unit clock */ - writel(readl(S3C24X0_CLOCK_POWER_BASE + 0x0c) | 0x200, - S3C24X0_CLOCK_POWER_BASE + 0x0c); + writel(readl(S3C_CLOCK_POWER_BASE + 0x0c) | 0x200, + S3C_CLOCK_POWER_BASE + 0x0c); if (pd == NULL) { pr_err("Missing platform data\n"); @@ -775,8 +775,8 @@ static int s3c_mci_probe(struct device_d *hw_dev) /* feed forward the platform specific values */ mci_pdata.voltages = pd->voltages; mci_pdata.host_caps = pd->caps; - mci_pdata.f_min = pd->f_min == 0 ? s3c24xx_get_pclk() / 256 : pd->f_min; - mci_pdata.f_max = pd->f_max == 0 ? s3c24xx_get_pclk() / 2 : pd->f_max; + mci_pdata.f_min = pd->f_min == 0 ? s3c_get_pclk() / 256 : pd->f_min; + mci_pdata.f_max = pd->f_max == 0 ? s3c_get_pclk() / 2 : pd->f_max; /* * Start the clock to let the engine and the card finishes its startup diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index 4e95e5c780..4191a49a96 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -48,7 +48,7 @@ static int s3c24x0_serial_setbaudrate(struct console_device *cdev, int baudrate) unsigned val; /* value is calculated so : PCLK / (16 * baudrate) -1 */ - val = s3c24xx_get_pclk() / (16 * baudrate) - 1; + val = s3c_get_pclk() / (16 * baudrate) - 1; writew(val, base + UBRDIV); return 0; diff --git a/drivers/video/s3c24xx.c b/drivers/video/s3c24xx.c index 75677c31a6..f6af773685 100644 --- a/drivers/video/s3c24xx.c +++ b/drivers/video/s3c24xx.c @@ -227,7 +227,7 @@ static int s3cfb_activate_var(struct fb_info *fb_info) /* ensure video output is _off_ */ writel(0x00000000, fbi->base + LCDCON1); - hclk = s3c24xx_get_hclk() / 1000U; /* hclk in kHz */ + hclk = s3c_get_hclk() / 1000U; /* hclk in kHz */ div = hclk / PICOS2KHZ(mode->pixclock); if (div < 3) div = 3; @@ -339,7 +339,7 @@ static void s3cfb_info(struct device_d *hw_dev) addr3 = readl(fbi->base + LCDSADDR3); printf(" Video hardware info:\n"); - printf(" Video clock is running at %u Hz\n", s3c24xx_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2)); + printf(" Video clock is running at %u Hz\n", s3c_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2)); printf(" Video memory bank starts at 0x%08X\n", GET_LCDBANK(addr1) << 22); printf(" Video memory bank offset: 0x%08X\n", GET_LCDBASEU(addr1)); printf(" Video memory end: 0x%08X\n", GET_LCDBASEU(addr2)); |