diff options
Diffstat (limited to 'Documentation/boards/ibase-mi991af.rst')
| -rw-r--r-- | Documentation/boards/ibase-mi991af.rst | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/boards/ibase-mi991af.rst b/Documentation/boards/ibase-mi991af.rst new file mode 100644 index 0000000000..a22e5fcf79 --- /dev/null +++ b/Documentation/boards/ibase-mi991af.rst @@ -0,0 +1,43 @@ +iBASE MI991AF +============= + +The iBASE MI991AF Mini-ITX motherboard has + + * 7th/6th Generation Intel® Xeon® E3 / Core™ i7 / i5 /i3 / Pentium® / Celeron® QC/DC processors, up to 4GHz + * 2x DDR4 SO-DIMM, Max. 32GB, ECC compatible + * Intel® Processor integrated graphics device, supports DVI-D, HDMI and DisplayPort + * Dual Intel® Gigabit LAN + * 2x USB 2.0, 6x USB 3.0, 4x COM, 4x SATAIII + * 2x Mini PCI-E slots, 1x mSATA, 1x PCI-E(x16) + * Watchdog timer, Digital I/O, iAMT (11.0), TPM (1.2), iSMART + +Running barebox +--------------- + +Building the barebox image for this target is covered by the ``efi_defconfig`` + +BIOS should be configured as follow: + + * When you turn on the computer, the BIOS is immediately activated. Pressing + the <Del> key immediately allows you to enter the BIOS Setup utility. If you are + a little bit late pressing the <Del> key, POST (Power On Self Test) will + continue with its test routines, thus preventing you from invoking the Setup. + In this case restart the system by pressing the ”Reset” button or simultaneously + pressing the <Ctrl>, <Alt> and <Delete> keys. You can also restart by turning the + system Off and back On again. + * Reset BIOS settings. With this step we wont to make sure BIOS has defined common state to avoid + undocumented issues. Switch to "Save & Exit" tab, choice "Restore Defaults" + and press Enter. Answer "Yes" and press Enter again. Then choice "Save Changes and Exit" + and press Enter. + * Enable UEFI support. Switch to "Boot" tab. Choice "Boot mode select" and set it to "UEFI". + Switch in the "Save & Exit" tab to "Save Changes and Exit" and press Enter. + +To make network work in barebox you will need to prepare efi binary network drivers and put them in to +"network-drivers" directory. + +To continue please proceed with barebox :ref:`barebox_on_uefi` documentation. + +Links +----- + + * https://www.ibase.com.tw/english/ProductDetail/EmbeddedComputing/MI991 |