1 files changed, 0 insertions, 93 deletions
diff --git a/Documentation/boards/s3c/Digi-a9m2440.rst b/Documentation/boards/s3c/Digi-a9m2440.rst
deleted file mode 100644
index 32d58b9a04..0000000000
--- a/Documentation/boards/s3c/Digi-a9m2440.rst
+++ /dev/null
@@ -1,93 +0,0 @@
-DIGI a9m2440
-============
-
-This CPU card is based on a Samsung S3C2440 CPU. The card is shipped with:
-
-  * S3C2440\@400 MHz or 533 MHz (ARM920T/ARMv4T)
-  * 16.9344 MHz crystal reference
-  * SDRAM 32/64/128 MiB
-
-     * Samsung K4M563233E-EE1H (one or two devices for 32 MiB or 64 MiB)
-
-       * 2M x 32bit x 4 Banks Mobile SDRAM
-       * CL2\@100 MHz (CAS/RAS delay 19ns)
-       * 105 MHz max
-       * column address size is 9 bits
-       *  Row cycle time: 69ns
-
-     * Samsung K4M513233C-DG75 (one or two devices for 64 MiB or 128 MiB)
-
-       * 4M x 32bit x 4 Banks Mobile SDRAM
-       * CL2\@100MHz (CAS/RAS delay 18ns)
-       * 111 MHz max
-       * column address size is 9 bits
-       * Row cycle time: 63ns
-
-     * 64ms refresh period (4k)
-     * 90 pin FBGA
-     * 32 bit data bits
-     * Extended temperature range (-25°C...85°C)
-
-  * NAND Flash 32/64/128 MiB
-
-     * Samsung KM29U512T (NAND01GW3A0AN6)
-
-       * 64 MiB 3,3V 8-bit
-       * ID: 0xEC, 0x76, 0x??, 0xBD
-
-     * Samsung KM29U256T
-
-       * 32 MiB 3,3V 8-bit
-       * ID: 0xEC, 0x75, 0x??, 0xBD
-
-     * ST Micro
-
-       * 128 MiB 3,3V 8-bit
-       * ID: 0x20, 0x79
-
-     * 30ns/40ns/20ns
-
-  * I2C interface, 100 KHz and 400 KHz
-
-     * Real Time Clock
-
-       * Dallas DS1337
-       * address 0x68
-
-     * EEPROM
-
-       * ST M24LC64
-       * address 0x50
-       * 16bit addressing
-
-  * LCD interface
-  * Touch Screen interface
-  * Camera interface
-  * I2S interface
-  * AC97 Audio-CODEC interface
-  * SD card interface
-  * 3 serial RS232 interfaces
-  * Host and device USB interface, USB1.1 compliant
-  * Ethernet interface
-
-    * 10Mbps, Cirrus Logic, CS8900A (on the CPU card)
-
-  * SPI interface
-  * JTAG interface
-
-How to get the binary image
----------------------------
-
-Configure with the default configuration:
-
-.. code-block:: sh
-
-  make ARCH=arm a9m2440_defconfig
-
-Build the binary image:
-
-.. code-block:: sh
-
-  make ARCH=arm CROSS_COMPILE=armv4compiler
-
-**NOTE:** replace the armv4compiler with your ARM v4 cross compiler.