Diffstat (limited to 'Documentation')
1 files changed, 32 insertions, 9 deletions
diff --git a/Documentation/user/bootchooser.rst b/Documentation/user/bootchooser.rst
index 52aa595..7d7564b 100644
@@ -61,9 +61,15 @@ When booting, *bootchooser* starts the boot target with the highest ``priority``
has a non-zero ``remaining_attempts`` counter. With every start of a boot target the
``remaining_attempts`` counter of this boot target is decremented by one. This means
every boot target's ``remaining_attempts`` counter reaches zero sooner or later and
-the boot target won't be booted anymore. To prevent that, the ``remaining_attempts``
-counter must be reset to its default. There are different flags in the
-*bootchooser* which control resetting the ``remaining_attempts`` counter,
+the boot target won't be booted anymore.
+This behavior assures that one can retry booting a target a limited number of
+times to handle temporary issues (such as power outage) and optionally allows
+booting a fallback in case of a permanent failure.
+To indicate a successful boot, one must explicitly reset the remaining
+attempts counter. See `Marking a Boot as Successful`_.
+To prevent ending up in an unbootable system after a number of failed boot
+attempts, there is a also a built-in mechanism to reset the counters to their defaults,
controlled by the ``global.bootchooser.reset_attempts`` variable. It holds a
list of space-separated flags. Possible values are:
@@ -74,12 +80,29 @@ list of space-separated flags. Possible values are:
- ``all-zero``: The ``remaining_attempts`` counters of all enabled boot targets are
reset when none of them has any ``remaining_attempts`` left.
-Additionally the ``remaining_attempts`` counter can be reset manually using the
-:ref:`bootchoser command <command_bootchooser>`. This allows for custom conditions
-under which a system is marked as good.
-In case only the booted system itself knows when it is in a good state, the
-barebox-state tool from the dt-utils_ package can be used to reset the
-``remaining_attempts`` counter from the running system.
+Marking a Boot as Successful
+While the bootchooser algorithm handles attempts decrementation, retries and
+selection of the right boot target itself, it cannot decide if the system
+booted successfully on its own.
+In case only the booted system itself knows when it is in a good state,
+it can report this to the bootchooser from Linux userspace using the
+*barebox-state* tool from the dt-utils_ package.::
+ barebox-state -s bootstate.<target>.remaining_attemps <reset-value>
+If instead the bootchooser can detect a failed boot itself using the
+:ref:`reset reason <reset_reason>` (WDG), one can mark the boot successful
+using the barebox :ref:`bootchoser command <command_bootchooser>`::
+ bootchooser -s
+to mark the last boot successful.
+This will reset the ``remaining_attempts`` counter of the *last chosen* slot to
+its default value (``reset_attempts``).
.. _dt-utils: https://git.pengutronix.de/cgit/tools/dt-utils