diff options
Diffstat (limited to 'arch/arm/mach-samsung/mem-s3c24x0.c')
-rw-r--r-- | arch/arm/mach-samsung/mem-s3c24x0.c | 57 |
1 files changed, 0 insertions, 57 deletions
diff --git a/arch/arm/mach-samsung/mem-s3c24x0.c b/arch/arm/mach-samsung/mem-s3c24x0.c index d40db14ff2..db61c63b64 100644 --- a/arch/arm/mach-samsung/mem-s3c24x0.c +++ b/arch/arm/mach-samsung/mem-s3c24x0.c @@ -80,60 +80,3 @@ void s3c24xx_disable_second_sdram_bank(void) writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7); writel(readl(S3C_MISCCR) | (1 << 18), S3C_MISCCR); /* disable its clock */ } - -/** - -@page dev_s3c24xx_arch Samsung's S3C24xx Platforms in barebox - -@section s3c24xx_boards Boards using S3C24xx Processors - -@li @subpage arch/arm/boards/a9m2410/a9m2410.c -@li @subpage arch/arm/boards/a9m2440/a9m2440.c - -@section s3c24xx_arch Documentation for S3C24xx Architectures Files - -@li @subpage arch/arm/mach-s3c24xx/generic.c - -@section s3c24xx_mem_map SDRAM Memory Map - -SDRAM starts at address 0x3000.0000 up to the available amount of connected -SDRAM memory. Physically this CPU can handle up to 256MiB (two areas with -up to 128MiB each). - -@subsection s3c24xx_mem_generic_map Generic Map -- 0x0000.0000 Start of the internal SRAM when booting from NAND flash memory or CS signal to a NOR flash memory. -- 0x0800.0000 Start of I/O space. -- 0x3000.0000 Start of SDRAM area. - - 0x3000.0100 Start of the TAG list area. - - 0x3000.8000 Start of the linux kernel (physical address). -- 0x4000.0000 Start of internal SRAM, when booting from NOR flash memory -- 0x4800.0000 Start of the internal I/O area - -@section s3c24xx_asm_arm include/asm-arm/arch-s3c24xx directory guidelines -All S3C24xx common headers are located here. - -@note Do not add board specific header files/information here. -*/ - -/** @page dev_s3c24xx_mach Samsung's S3C24xx based platforms - -@par barebox Map - -The location of the @a barebox itself depends on the available amount of -installed SDRAM memory: - -- 0x30fc.0000 Start of @a barebox when 16MiB SDRAM is available -- 0x31fc.0000 Start of @a barebox when 32MiB SDRAM is available -- 0x33fc.0000 Start of @a barebox when 64MiB SDRAM is available - -Adjust the @p CONFIG_TEXT_BASE/CONFIG_ARCH_TEXT_BASE symbol in accordance to -the available memory. - -@note The RAM based filesystem and the stack resides always below the -@a barebox start address. - -@li @subpage dev_s3c24xx_wd_handling -@li @subpage dev_s3c24xx_pll_handling -@li @subpage dev_s3c24xx_sdram_handling -@li @subpage dev_s3c24xx_nandboot_handling -*/ |