diff options
Diffstat (limited to 'board/sbc2410x/sbc2410x.c')
| -rw-r--r-- | board/sbc2410x/sbc2410x.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c new file mode 100644 index 0000000000..7030985b29 --- /dev/null +++ b/board/sbc2410x/sbc2410x.c @@ -0,0 +1,183 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * (C) Copyright 2005 + * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <s3c2410.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include <linux/mtd/nand.h> +#endif + +/* ------------------------------------------------------------------------- */ + +#define FCLK_SPEED 1 + +#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ +#define M_MDIV 0xC3 +#define M_PDIV 0x4 +#define M_SDIV 0x1 +#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ +#define M_MDIV 0x5c +#define M_PDIV 0x4 +#define M_SDIV 0x0 +#endif + +#define USB_CLOCK 1 + +#if USB_CLOCK==0 +#define U_M_MDIV 0xA1 +#define U_M_PDIV 0x3 +#define U_M_SDIV 0x1 +#elif USB_CLOCK==1 +#define U_M_MDIV 0x48 +#define U_M_PDIV 0x3 +#define U_M_SDIV 0x2 +#endif + +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + /* to reduce PLL lock time, adjust the LOCKTIME register */ + clk_power->LOCKTIME = 0xFFFFFF; + + /* configure MPLL */ + clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + + /* some delay between MPLL and UPLL */ + delay (4000); + + /* configure UPLL */ + clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + + /* some delay between MPLL and UPLL */ + delay (8000); + + /* set up the I/O ports */ + gpio->GPACON = 0x007FFFFF; + gpio->GPBCON = 0x00044556; + gpio->GPBUP = 0x000007FF; + gpio->GPCCON = 0xAAAAAAAA; + gpio->GPCUP = 0x0000FFFF; + gpio->GPDCON = 0xAAAAAAAA; + gpio->GPDUP = 0x0000FFFF; + gpio->GPECON = 0xAAAAAAAA; + gpio->GPEUP = 0x0000FFFF; + gpio->GPFCON = 0x000055AA; + gpio->GPFUP = 0x000000FF; + gpio->GPGCON = 0xFF95FF3A; + gpio->GPGUP = 0x0000FFFF; + gpio->GPHCON = 0x0016FAAA; + gpio->GPHUP = 0x000007FF; + + gpio->EXTINT0=0x22222222; + gpio->EXTINT1=0x22222222; + gpio->EXTINT2=0x22222222; + + /* arch number of SMDK2410-Board */ + gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x30000100; + + icache_enable(); + dcache_enable(); + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +extern ulong nand_probe(ulong physadr); + +static inline void NF_Reset(void) +{ + int i; + + NF_SetCE(NFCE_LOW); + NF_Cmd(0xFF); /* reset command */ + for(i = 0; i < 10; i++); /* tWB = 100ns. */ + NF_WaitRB(); /* wait 200~500us; */ + NF_SetCE(NFCE_HIGH); +} + +static inline void NF_Init(void) +{ +#if 1 +#define TACLS 0 +#define TWRPH0 3 +#define TWRPH1 0 +#else +#define TACLS 0 +#define TWRPH0 4 +#define TWRPH1 2 +#endif + + NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0)); + /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */ + /* 1 1 1 1, 1 xxx, r xxx, r xxx */ + /* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */ + + NF_Reset(); +} + +void nand_init(void) +{ + S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + + NF_Init(); +#ifdef DEBUG + printf("NAND flash probing at 0x%.8lX\n", (ulong)nand); +#endif + printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20); +} +#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ |