diff options
Diffstat (limited to 'drivers/ps2ser.c')
| -rw-r--r-- | drivers/ps2ser.c | 319 |
1 files changed, 0 insertions, 319 deletions
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c deleted file mode 100644 index 4e304f7407..0000000000 --- a/drivers/ps2ser.c +++ /dev/null @@ -1,319 +0,0 @@ -/*********************************************************************** - * - * (C) Copyright 2004 - * DENX Software Engineering - * Wolfgang Denk, wd@denx.de - * All rights reserved. - * - * Simple 16550A serial driver - * - * Originally from linux source (drivers/char/ps2ser.c) - * - * Used by the PS/2 multiplexer driver (ps2mult.c) - * - ***********************************************************************/ - -#include <common.h> - -#ifdef CONFIG_PS2SERIAL - -#include <asm/io.h> -#include <asm/atomic.h> -#include <ps2mult.h> -#if defined(CFG_NS16550) || defined(CONFIG_MPC85xx) -#include <ns16550.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* #define DEBUG */ - -#define PS2SER_BAUD 57600 - -#ifdef CONFIG_MPC5xxx -#if CONFIG_PS2SERIAL == 1 -#define PSC_BASE MPC5XXX_PSC1 -#elif CONFIG_PS2SERIAL == 2 -#define PSC_BASE MPC5XXX_PSC2 -#elif CONFIG_PS2SERIAL == 3 -#define PSC_BASE MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PS2SERIAL must be in 1, 2 or 3 -#elif CONFIG_PS2SERIAL == 4 -#define PSC_BASE MPC5XXX_PSC4 -#elif CONFIG_PS2SERIAL == 5 -#define PSC_BASE MPC5XXX_PSC5 -#elif CONFIG_PS2SERIAL == 6 -#define PSC_BASE MPC5XXX_PSC6 -#else -#error CONFIG_PS2SERIAL must be in 1 ... 6 -#endif - -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - -#if CONFIG_PS2SERIAL == 1 -#define COM_BASE (CFG_CCSRBAR+0x4500) -#elif CONFIG_PS2SERIAL == 2 -#define COM_BASE (CFG_CCSRBAR+0x4600) -#else -#error CONFIG_PS2SERIAL must be in 1 ... 2 -#endif - -#endif /* CONFIG_MPC5xxx / CONFIG_MPC8540 / other */ - -static int ps2ser_getc_hw(void); -static void ps2ser_interrupt(void *dev_id); - -extern struct serial_state rs_table[]; /* in serial.c */ -#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && !defined(CONFIG_MPC8555) -static struct serial_state *state; -#endif - -static u_char ps2buf[PS2BUF_SIZE]; -static atomic_t ps2buf_cnt; -static int ps2buf_in_idx; -static int ps2buf_out_idx; - -#ifdef CONFIG_MPC5xxx -int ps2ser_init(void) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; - unsigned long baseclk; - int div; - - /* reset PSC */ - psc->command = PSC_SEL_MODE_REG_1; - - /* select clock sources */ -#if defined(CONFIG_MGT5100) - psc->psc_clock_select = 0xdd00; - baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) - psc->psc_clock_select = 0; - baseclk = (gd->ipb_clk + 16) / 32; -#endif - - /* switch to UART mode */ - psc->sicr = 0; - - /* configure parity, bit length and so on */ -#if defined(CONFIG_MGT5100) - psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#elif defined(CONFIG_MPC5200) - psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#endif - psc->mode = PSC_MODE_ONE_STOP; - - /* set up UART divisor */ - div = (baseclk + (PS2SER_BAUD/2)) / PS2SER_BAUD; - psc->ctur = (div >> 8) & 0xff; - psc->ctlr = div & 0xff; - - /* disable all interrupts */ - psc->psc_imr = 0; - - /* reset and enable Rx/Tx */ - psc->command = PSC_RST_RX; - psc->command = PSC_RST_TX; - psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; - - return (0); -} - -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) -int ps2ser_init(void) -{ - NS16550_t com_port = (NS16550_t)COM_BASE; - - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE | LCR_8N1; - com_port->dll = (CFG_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff; - com_port->dlm = ((CFG_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff; - com_port->lcr = LCR_8N1; - com_port->mcr = (MCR_DTR | MCR_RTS); - com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR); - - return (0); -} - -#else /* !CONFIG_MPC5xxx && !CONFIG_MPC8540 / other */ - -static inline unsigned int ps2ser_in(int offset) -{ - return readb((unsigned long) state->iomem_base + offset); -} - -static inline void ps2ser_out(int offset, int value) -{ - writeb(value, (unsigned long) state->iomem_base + offset); -} - -int ps2ser_init(void) -{ - int quot; - unsigned cval; - - state = rs_table + CONFIG_PS2SERIAL; - - quot = state->baud_base / PS2SER_BAUD; - cval = 0x3; /* 8N1 - 8 data bits, no parity bits, 1 stop bit */ - - /* Set speed, enable interrupts, enable FIFO - */ - ps2ser_out(UART_LCR, cval | UART_LCR_DLAB); - ps2ser_out(UART_DLL, quot & 0xff); - ps2ser_out(UART_DLM, quot >> 8); - ps2ser_out(UART_LCR, cval); - ps2ser_out(UART_IER, UART_IER_RDI); - ps2ser_out(UART_MCR, UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS); - ps2ser_out(UART_FCR, - UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - - /* If we read 0xff from the LSR, there is no UART here - */ - if (ps2ser_in(UART_LSR) == 0xff) { - printf ("ps2ser.c: no UART found\n"); - return -1; - } - - irq_install_handler(state->irq, ps2ser_interrupt, NULL); - - return 0; -} -#endif /* CONFIG_MPC5xxx / CONFIG_MPC8540 / other */ - -void ps2ser_putc(int chr) -{ -#ifdef CONFIG_MPC5xxx - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - NS16550_t com_port = (NS16550_t)COM_BASE; -#endif -#ifdef DEBUG - printf(">>>> 0x%02x\n", chr); -#endif - -#ifdef CONFIG_MPC5xxx - while (!(psc->psc_status & PSC_SR_TXRDY)); - - psc->psc_buffer_8 = chr; -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - while ((com_port->lsr & LSR_THRE) == 0); - com_port->thr = chr; -#else - while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE)); - - ps2ser_out(UART_TX, chr); -#endif -} - -static int ps2ser_getc_hw(void) -{ -#ifdef CONFIG_MPC5xxx - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - NS16550_t com_port = (NS16550_t)COM_BASE; -#endif - int res = -1; - -#ifdef CONFIG_MPC5xxx - if (psc->psc_status & PSC_SR_RXRDY) { - res = (psc->psc_buffer_8); - } -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - if (com_port->lsr & LSR_DR) { - res = com_port->rbr; - } -#else - if (ps2ser_in(UART_LSR) & UART_LSR_DR) { - res = (ps2ser_in(UART_RX)); - } -#endif - - return res; -} - -int ps2ser_getc(void) -{ - volatile int chr; - int flags; - -#ifdef DEBUG - printf("<< "); -#endif - - flags = disable_interrupts(); - - do { - if (atomic_read(&ps2buf_cnt) != 0) { - chr = ps2buf[ps2buf_out_idx++]; - ps2buf_out_idx &= (PS2BUF_SIZE - 1); - atomic_dec(&ps2buf_cnt); - } else { - chr = ps2ser_getc_hw(); - } - } - while (chr < 0); - - if (flags) enable_interrupts(); - -#ifdef DEBUG - printf("0x%02x\n", chr); -#endif - - return chr; -} - -int ps2ser_check(void) -{ - int flags; - - flags = disable_interrupts(); - ps2ser_interrupt(NULL); - if (flags) enable_interrupts(); - - return atomic_read(&ps2buf_cnt); -} - -static void ps2ser_interrupt(void *dev_id) -{ -#ifdef CONFIG_MPC5xxx - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - NS16550_t com_port = (NS16550_t)COM_BASE; -#endif - int chr; - int status; - - do { - chr = ps2ser_getc_hw(); -#ifdef CONFIG_MPC5xxx - status = psc->psc_status; -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - status = com_port->lsr; -#else - status = ps2ser_in(UART_IIR); -#endif - if (chr < 0) continue; - - if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) { - ps2buf[ps2buf_in_idx++] = chr; - ps2buf_in_idx &= (PS2BUF_SIZE - 1); - atomic_inc(&ps2buf_cnt); - } else { - printf ("ps2ser.c: buffer overflow\n"); - } -#ifdef CONFIG_MPC5xxx - } while (status & PSC_SR_RXRDY); -#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) - } while (status & LSR_DR); -#else - } while (status & UART_IIR_RDI); -#endif - - if (atomic_read(&ps2buf_cnt)) { - ps2mult_callback(atomic_read(&ps2buf_cnt)); - } -} - -#endif /* CONFIG_PS2SERIAL */ |