diff options
Diffstat (limited to 'drivers/rtc/ds1306.c')
| -rw-r--r-- | drivers/rtc/ds1306.c | 438 |
1 files changed, 0 insertions, 438 deletions
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c deleted file mode 100644 index e01e1ceae9..0000000000 --- a/drivers/rtc/ds1306.c +++ /dev/null @@ -1,438 +0,0 @@ -/* - * (C) Copyright 2002 SIXNET, dge@sixnetio.com. - * - * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Date & Time support for DS1306 RTC using SPI: - * - * - SXNI855T: it uses its own soft SPI here in this file - * - all other: use the external spi_xfer() function - * (see include/spi.h) - */ - -#include <common.h> -#include <command.h> -#include <rtc.h> -#include <spi.h> - -#if defined(CONFIG_RTC_DS1306) && (CONFIG_COMMANDS & CFG_CMD_DATE) - -#define RTC_SECONDS 0x00 -#define RTC_MINUTES 0x01 -#define RTC_HOURS 0x02 -#define RTC_DAY_OF_WEEK 0x03 -#define RTC_DATE_OF_MONTH 0x04 -#define RTC_MONTH 0x05 -#define RTC_YEAR 0x06 - -#define RTC_SECONDS_ALARM0 0x07 -#define RTC_MINUTES_ALARM0 0x08 -#define RTC_HOURS_ALARM0 0x09 -#define RTC_DAY_OF_WEEK_ALARM0 0x0a - -#define RTC_SECONDS_ALARM1 0x0b -#define RTC_MINUTES_ALARM1 0x0c -#define RTC_HOURS_ALARM1 0x0d -#define RTC_DAY_OF_WEEK_ALARM1 0x0e - -#define RTC_CONTROL 0x0f -#define RTC_STATUS 0x10 -#define RTC_TRICKLE_CHARGER 0x11 - -#define RTC_USER_RAM_BASE 0x20 - -/* - * External table of chip select functions (see the appropriate board - * support for the actual definition of the table). - */ -extern spi_chipsel_type spi_chipsel[]; -extern int spi_chipsel_cnt; - -static unsigned int bin2bcd (unsigned int n); -static unsigned char bcd2bin (unsigned char c); - -/* ************************************************************************* */ -#ifdef CONFIG_SXNI855T /* !!! SHOULD BE CHANGED TO NEW CODE !!! */ - -static void soft_spi_send (unsigned char n); -static unsigned char soft_spi_read (void); -static void init_spi (void); - -/*----------------------------------------------------------------------- - * Definitions - */ - -#define PB_SPISCK 0x00000002 /* PB 30 */ -#define PB_SPIMOSI 0x00000004 /* PB 29 */ -#define PB_SPIMISO 0x00000008 /* PB 28 */ -#define PB_SPI_CE 0x00010000 /* PB 15 */ - -/* ------------------------------------------------------------------------- */ - -/* read clock time from DS1306 and return it in *tmp */ -void rtc_get (struct rtc_time *tmp) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - unsigned char spi_byte; /* Data Byte */ - - init_spi (); /* set port B for software SPI */ - - /* Now we can enable the DS1306 RTC */ - immap->im_cpm.cp_pbdat |= PB_SPI_CE; - udelay (10); - - /* Shift out the address (0) of the time in the Clock Chip */ - soft_spi_send (0); - - /* Put the clock readings into the rtc_time structure */ - tmp->tm_sec = bcd2bin (soft_spi_read ()); /* Read seconds */ - tmp->tm_min = bcd2bin (soft_spi_read ()); /* Read minutes */ - - /* Hours are trickier */ - spi_byte = soft_spi_read (); /* Read Hours into temporary value */ - if (spi_byte & 0x40) { - /* 12 hour mode bit is set (time is in 1-12 format) */ - if (spi_byte & 0x20) { - /* since PM we add 11 to get 0-23 for hours */ - tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11; - } else { - /* since AM we subtract 1 to get 0-23 for hours */ - tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1; - } - } else { - /* Otherwise, 0-23 hour format */ - tmp->tm_hour = (bcd2bin (spi_byte & 0x3F)); - } - - soft_spi_read (); /* Read and discard Day of week */ - tmp->tm_mday = bcd2bin (soft_spi_read ()); /* Read Day of the Month */ - tmp->tm_mon = bcd2bin (soft_spi_read ()); /* Read Month */ - - /* Read Year and convert to this century */ - tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000; - - /* Now we can disable the DS1306 RTC */ - immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ - udelay (10); - - GregorianDay (tmp); /* Determine the day of week */ - - debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); -} - -/* ------------------------------------------------------------------------- */ - -/* set clock time in DS1306 RTC and in MPC8xx RTC */ -void rtc_set (struct rtc_time *tmp) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - - init_spi (); /* set port B for software SPI */ - - /* Now we can enable the DS1306 RTC */ - immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */ - udelay (10); - - /* First disable write protect in the clock chip control register */ - soft_spi_send (0x8F); /* send address of the control register */ - soft_spi_send (0x00); /* send control register contents */ - - /* Now disable the DS1306 to terminate the write */ - immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; - udelay (10); - - /* Now enable the DS1306 to initiate a new write */ - immap->im_cpm.cp_pbdat |= PB_SPI_CE; - udelay (10); - - /* Next, send the address of the clock time write registers */ - soft_spi_send (0x80); /* send address of the first time register */ - - /* Use Burst Mode to send all of the time data to the clock */ - bin2bcd (tmp->tm_sec); - soft_spi_send (bin2bcd (tmp->tm_sec)); /* Send Seconds */ - soft_spi_send (bin2bcd (tmp->tm_min)); /* Send Minutes */ - soft_spi_send (bin2bcd (tmp->tm_hour)); /* Send Hour */ - soft_spi_send (bin2bcd (tmp->tm_wday)); /* Send Day of the Week */ - soft_spi_send (bin2bcd (tmp->tm_mday)); /* Send Day of Month */ - soft_spi_send (bin2bcd (tmp->tm_mon)); /* Send Month */ - soft_spi_send (bin2bcd (tmp->tm_year - 2000)); /* Send Year */ - - /* Now we can disable the Clock chip to terminate the burst write */ - immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ - udelay (10); - - /* Now we can enable the Clock chip to initiate a new write */ - immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */ - udelay (10); - - /* First we Enable write protect in the clock chip control register */ - soft_spi_send (0x8F); /* send address of the control register */ - soft_spi_send (0x40); /* send out Control Register contents */ - - /* Now disable the DS1306 */ - immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ - udelay (10); - - /* Set standard MPC8xx clock to the same time so Linux will - * see the time even if it doesn't have a DS1306 clock driver. - * This helps with experimenting with standard kernels. - */ - { - ulong tim; - - tim = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); - - immap->im_sitk.sitk_rtck = KAPWR_KEY; - immap->im_sit.sit_rtc = tim; - } - - debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); -} - -/* ------------------------------------------------------------------------- */ - -/* Initialize Port B for software SPI */ -static void init_spi (void) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - - /* Force output pins to begin at logic 0 */ - immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK); - - /* Set these 3 signals as outputs */ - immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK); - - immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */ - udelay (10); -} - -/* ------------------------------------------------------------------------- */ - -/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */ -static void soft_spi_send (unsigned char n) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - unsigned char bitpos; /* bit position to receive */ - unsigned char i; /* Loop Control */ - - /* bit position to send, start with most significant bit */ - bitpos = 0x80; - - /* Send 8 bits to software SPI */ - for (i = 0; i < 8; i++) { /* Loop for 8 bits */ - immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */ - - if (n & bitpos) - immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */ - else - immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */ - udelay (10); - - immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */ - udelay (10); - - bitpos >>= 1; /* Shift for next bit position */ - } -} - -/* ------------------------------------------------------------------------- */ - -/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */ -static unsigned char soft_spi_read (void) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - - unsigned char spi_byte = 0; /* Return value, assume success */ - unsigned char bitpos; /* bit position to receive */ - unsigned char i; /* Loop Control */ - - /* bit position to receive, start with most significant bit */ - bitpos = 0x80; - - /* Read 8 bits here */ - for (i = 0; i < 8; i++) { /* Do 8 bits in loop */ - immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */ - udelay (10); - if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */ - spi_byte |= bitpos; /* Set data accordingly */ - immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */ - udelay (10); - bitpos >>= 1; /* Shift for next bit position */ - } - - return spi_byte; /* Return the byte read */ -} - -/* ------------------------------------------------------------------------- */ - -void rtc_reset (void) -{ - return; /* nothing to do */ -} - -#else /* not CONFIG_SXNI855T */ -/* ************************************************************************* */ - -static unsigned char rtc_read (unsigned char reg); -static void rtc_write (unsigned char reg, unsigned char val); - -/* read clock time from DS1306 and return it in *tmp */ -void rtc_get (struct rtc_time *tmp) -{ - unsigned char sec, min, hour, mday, wday, mon, year; - - sec = rtc_read (RTC_SECONDS); - min = rtc_read (RTC_MINUTES); - hour = rtc_read (RTC_HOURS); - mday = rtc_read (RTC_DATE_OF_MONTH); - wday = rtc_read (RTC_DAY_OF_WEEK); - mon = rtc_read (RTC_MONTH); - year = rtc_read (RTC_YEAR); - - debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x " - "hr: %02x min: %02x sec: %02x\n", - year, mon, mday, wday, hour, min, sec); - debug ("Alarms[0]: wday: %02x hour: %02x min: %02x sec: %02x\n", - rtc_read (RTC_DAY_OF_WEEK_ALARM0), - rtc_read (RTC_HOURS_ALARM0), - rtc_read (RTC_MINUTES_ALARM0), rtc_read (RTC_SECONDS_ALARM0)); - debug ("Alarms[1]: wday: %02x hour: %02x min: %02x sec: %02x\n", - rtc_read (RTC_DAY_OF_WEEK_ALARM1), - rtc_read (RTC_HOURS_ALARM1), - rtc_read (RTC_MINUTES_ALARM1), rtc_read (RTC_SECONDS_ALARM1)); - - tmp->tm_sec = bcd2bin (sec & 0x7F); /* convert Seconds */ - tmp->tm_min = bcd2bin (min & 0x7F); /* convert Minutes */ - - /* convert Hours */ - tmp->tm_hour = (hour & 0x40) - ? ((hour & 0x20) /* 12 hour mode */ - ? bcd2bin (hour & 0x1F) + 11 /* PM */ - : bcd2bin (hour & 0x1F) - 1 /* AM */ - ) - : bcd2bin (hour & 0x3F); /* 24 hour mode */ - - tmp->tm_mday = bcd2bin (mday & 0x3F); /* convert Day of the Month */ - tmp->tm_mon = bcd2bin (mon & 0x1F); /* convert Month */ - tmp->tm_year = bcd2bin (year) + 2000; /* convert Year */ - tmp->tm_wday = bcd2bin (wday & 0x07) - 1; /* convert Day of the Week */ - tmp->tm_yday = 0; - tmp->tm_isdst = 0; - - debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); -} - -/* ------------------------------------------------------------------------- */ - -/* set clock time from *tmp in DS1306 RTC */ -void rtc_set (struct rtc_time *tmp) -{ - debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); - - rtc_write (RTC_SECONDS, bin2bcd (tmp->tm_sec)); - rtc_write (RTC_MINUTES, bin2bcd (tmp->tm_min)); - rtc_write (RTC_HOURS, bin2bcd (tmp->tm_hour)); - rtc_write (RTC_DAY_OF_WEEK, bin2bcd (tmp->tm_wday + 1)); - rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday)); - rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon)); - rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000)); -} - -/* ------------------------------------------------------------------------- */ - -/* reset the DS1306 */ -void rtc_reset (void) -{ - /* clear the control register */ - rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */ - rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */ - - /* reset all alarms */ - rtc_write (RTC_SECONDS_ALARM0, 0x00); - rtc_write (RTC_SECONDS_ALARM1, 0x00); - rtc_write (RTC_MINUTES_ALARM0, 0x00); - rtc_write (RTC_MINUTES_ALARM1, 0x00); - rtc_write (RTC_HOURS_ALARM0, 0x00); - rtc_write (RTC_HOURS_ALARM1, 0x00); - rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00); - rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00); -} - -/* ------------------------------------------------------------------------- */ - -static unsigned char rtc_read (unsigned char reg) -{ - unsigned char dout[2]; /* SPI Output Data Bytes */ - unsigned char din[2]; /* SPI Input Data Bytes */ - - dout[0] = reg; - - if (spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din) != 0) { - return 0; - } else { - return din[1]; - } -} - -/* ------------------------------------------------------------------------- */ - -static void rtc_write (unsigned char reg, unsigned char val) -{ - unsigned char dout[2]; /* SPI Output Data Bytes */ - unsigned char din[2]; /* SPI Input Data Bytes */ - - dout[0] = 0x80 | reg; - dout[1] = val; - - spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din); -} - -#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */ - -/* ------------------------------------------------------------------------- */ - -static unsigned char bcd2bin (unsigned char n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -/* ------------------------------------------------------------------------- */ - -static unsigned int bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} -/* ------------------------------------------------------------------------- */ - -#endif |