summaryrefslogtreecommitdiffstats
path: root/drivers/sk98lin/h/xmac_ii.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sk98lin/h/xmac_ii.h')
-rw-r--r--drivers/sk98lin/h/xmac_ii.h72
1 files changed, 36 insertions, 36 deletions
diff --git a/drivers/sk98lin/h/xmac_ii.h b/drivers/sk98lin/h/xmac_ii.h
index ddddd2b9e0..2ef903a87d 100644
--- a/drivers/sk98lin/h/xmac_ii.h
+++ b/drivers/sk98lin/h/xmac_ii.h
@@ -30,103 +30,103 @@
* Added defines for copper MDI/MDIX configuration
* Added defines for LED Control Register
* Editorial changes
- *
+ *
* Revision 1.45 2002/12/10 14:35:13 rschmidt
* Corrected defines for Extended PHY Specific Control
* Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific)
- *
+ *
* Revision 1.44 2002/12/09 14:58:41 rschmidt
* Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature)
* Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask
- *
+ *
* Revision 1.43 2002/12/05 10:14:45 rschmidt
* Added define for GMAC's Half Duplex Burst Mode
* Added define for Rx GMAC FIFO Flush Mask (default)
- *
+ *
* Revision 1.42 2002/11/12 16:48:19 rschmidt
* Added defines for Cable Diagnostic Register (GPHY)
* Editorial changes
- *
+ *
* Revision 1.41 2002/10/21 11:20:22 rschmidt
* Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR
* Editorial changes
- *
+ *
* Revision 1.40 2002/10/14 14:54:14 rschmidt
* Added defines for GPHY Specific Status and GPHY Interrupt Status
* Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK
* Editorial changes
- *
+ *
* Revision 1.39 2002/10/10 15:53:44 mkarl
* added some bit definitions for link speed status and LED's
- *
+ *
* Revision 1.38 2002/08/21 16:23:46 rschmidt
* Added defines for PHY Specific Ctrl Reg
* Editorial changes
- *
+ *
* Revision 1.37 2002/08/16 14:50:33 rschmidt
* Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only)
* Changed define PHY_M_DEF_MSK for GPHY IRQ Mask
* Editorial changes
- *
+ *
* Revision 1.36 2002/08/12 13:21:10 rschmidt
* Added defines for different Broadcom PHY Ids
- *
+ *
* Revision 1.35 2002/08/08 15:58:01 rschmidt
* Added defines for Manual LED Override register (YUKON)
* Editorial changes
- *
+ *
* Revision 1.34 2002/07/31 17:23:36 rwahl
* Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR).
- *
+ *
* Revision 1.33 2002/07/23 16:03:37 rschmidt
* Added defines for GPHY registers
* Editorial changes
- *
+ *
* Revision 1.32 2002/07/15 18:14:37 rwahl
* Added GMAC MIB counters definitions.
* Editorial changes.
- *
+ *
* Revision 1.31 2002/07/15 15:42:50 rschmidt
* Removed defines from PHY specific reg. which are
* common to all PHYs
* Added defines for GMAC MIB Counters
* Editorial changes
- *
+ *
* Revision 1.30 2002/06/05 08:22:12 rschmidt
* Changed defines for GMAC Rx Control Register and Rx Status
* Editorial changes
- *
+ *
* Revision 1.29 2002/04/25 11:43:56 rschmidt
* Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res.
* Added new registers and defines for YUKON (GMAC, GPHY)
* Added Receive Frame Status Encoding for YUKON
* Editorial changes
- *
+ *
* Revision 1.28 2000/11/09 12:32:49 rassmann
* Renamed variables.
- *
+ *
* Revision 1.27 2000/05/17 11:00:46 malthoff
* Add bit for enable/disable power management in BCOM chip.
- *
+ *
* Revision 1.26 1999/11/22 14:03:00 cgoos
* Changed license header to GPL.
- *
+ *
* Revision 1.25 1999/08/12 19:19:38 malthoff
* Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet.
- *
+ *
* Revision 1.24 1999/07/30 11:27:21 cgoos
* Fixed a missing end-of-comment.
- *
+ *
* Revision 1.23 1999/07/30 07:03:31 malthoff
* Cut some long comments.
* Correct the XMAC PHY ID definitions.
- *
+ *
* Revision 1.22 1999/05/19 07:33:18 cgoos
* Changes for 1000Base-T.
- *
+ *
* Revision 1.21 1999/03/25 07:46:11 malthoff
* Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers.
- *
+ *
* Revision 1.20 1999/03/12 13:36:09 malthoff
* Remove __STDC__.
*
@@ -912,7 +912,7 @@ extern "C" {
/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */
-#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
+#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
#define PHY_L_AN_BP (1<<5) /* Bit 5: Base Page Indication */
@@ -920,7 +920,7 @@ extern "C" {
/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */
-#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
+#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/
@@ -1315,7 +1315,7 @@ extern "C" {
#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */
#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */
-#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
+#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
@@ -1614,7 +1614,7 @@ extern "C" {
#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow Control Mode Disabled */
#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */
/* Bit 0: reserved */
-
+
/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
/* Bit 15: reserved */
#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */
@@ -1636,20 +1636,20 @@ extern "C" {
#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
GM_GPCR_AU_SPD_DIS)
-
+
/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */
#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */
#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */
#define GM_TXCR_COL_THR (4<<10) /* Bit 12..10: Collision Threshold */
-
+
/* GM_RX_CTRL 16 bit r/w Receive Control Register */
#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */
#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */
#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */
#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */
-
+
/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */
#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */
@@ -1666,7 +1666,7 @@ extern "C" {
#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Length) */
/* Bit 7..5: reserved */
#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
-
+
#define DATA_BLIND_VAL(x) SHIFT11(x)
#define DATA_BLIND_FAST_ETH 0x1c
#define DATA_BLIND_GIGABIT 4
@@ -1682,13 +1682,13 @@ extern "C" {
#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */
#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */
/* Bit 2..0: reserved */
-
+
/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
/* Bit 15..6: reserved */
#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */
#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */
/* Bit 3..0: reserved */
-
+
/* Receive Frame Status Encoding */
#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */
/* Bit 15..14: reserved */