diff options
Diffstat (limited to 'drivers/tsec.h')
| -rw-r--r-- | drivers/tsec.h | 555 |
1 files changed, 0 insertions, 555 deletions
diff --git a/drivers/tsec.h b/drivers/tsec.h deleted file mode 100644 index cee30037db..0000000000 --- a/drivers/tsec.h +++ /dev/null @@ -1,555 +0,0 @@ -/* - * tsec.h - * - * Driver for the Motorola Triple Speed Ethernet Controller - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2003, Motorola, Inc. - * maintained by Xianghua Xiao (x.xiao@motorola.com) - * author Andy Fleming - * - */ - -#ifndef __TSEC_H -#define __TSEC_H - -#include <net.h> -#include <config.h> - -#ifndef CFG_TSEC1_OFFSET - #define CFG_TSEC1_OFFSET (0x24000) -#endif - -#define TSEC_SIZE 0x01000 - -/* FIXME: Should these be pushed back to 83xx and 85xx config files? */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) - #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) -#elif defined(CONFIG_MPC83XX) - #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) -#endif - - -#define MAC_ADDR_LEN 6 - -/* #define TSEC_TIMEOUT 1000000 */ -#define TSEC_TIMEOUT 1000 -#define TOUT_LOOP 1000000 - -#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ - -/* MAC register bits */ -#define MACCFG1_SOFT_RESET 0x80000000 -#define MACCFG1_RESET_RX_MC 0x00080000 -#define MACCFG1_RESET_TX_MC 0x00040000 -#define MACCFG1_RESET_RX_FUN 0x00020000 -#define MACCFG1_RESET_TX_FUN 0x00010000 -#define MACCFG1_LOOPBACK 0x00000100 -#define MACCFG1_RX_FLOW 0x00000020 -#define MACCFG1_TX_FLOW 0x00000010 -#define MACCFG1_SYNCD_RX_EN 0x00000008 -#define MACCFG1_RX_EN 0x00000004 -#define MACCFG1_SYNCD_TX_EN 0x00000002 -#define MACCFG1_TX_EN 0x00000001 - -#define MACCFG2_INIT_SETTINGS 0x00007205 -#define MACCFG2_FULL_DUPLEX 0x00000001 -#define MACCFG2_IF 0x00000300 -#define MACCFG2_GMII 0x00000200 -#define MACCFG2_MII 0x00000100 - -#define ECNTRL_INIT_SETTINGS 0x00001000 -#define ECNTRL_TBI_MODE 0x00000020 -#define ECNTRL_R100 0x00000008 - -#define miim_end -2 -#define miim_read -1 - -#define TBIPA_VALUE 0x1f -#define MIIMCFG_INIT_VALUE 0x00000003 -#define MIIMCFG_RESET 0x80000000 - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define MIIM_CONTROL 0x00 -#define MIIM_CONTROL_RESET 0x00009140 -#define MIIM_CONTROL_INIT 0x00001140 -#define MIIM_CONTROL_RESTART 0x00001340 -#define MIIM_ANEN 0x00001000 - -#define MIIM_CR 0x00 -#define MIIM_CR_RST 0x00008000 -#define MIIM_CR_INIT 0x00001000 - -#define MIIM_STATUS 0x1 -#define MIIM_STATUS_AN_DONE 0x00000020 -#define MIIM_STATUS_LINK 0x0004 -#define PHY_BMSR_AUTN_ABLE 0x0008 -#define PHY_BMSR_AUTN_COMP 0x0020 - -#define MIIM_PHYIR1 0x2 -#define MIIM_PHYIR2 0x3 - -#define MIIM_ANAR 0x4 -#define MIIM_ANAR_INIT 0x1e1 - -#define MIIM_TBI_ANLPBPA 0x5 -#define MIIM_TBI_ANLPBPA_HALF 0x00000040 -#define MIIM_TBI_ANLPBPA_FULL 0x00000020 - -#define MIIM_TBI_ANEX 0x6 -#define MIIM_TBI_ANEX_NP 0x00000004 -#define MIIM_TBI_ANEX_PRX 0x00000002 - -#define MIIM_GBIT_CONTROL 0x9 -#define MIIM_GBIT_CONTROL_INIT 0xe00 - -/* Cicada Auxiliary Control/Status Register */ -#define MIIM_CIS8201_AUX_CONSTAT 0x1c -#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 -#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 -#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 -#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 - -/* Cicada Extended Control Register 1 */ -#define MIIM_CIS8201_EXT_CON1 0x17 -#define MIIM_CIS8201_EXTCON1_INIT 0x0000 - -/* Cicada 8204 Extended PHY Control Register 1 */ -#define MIIM_CIS8204_EPHY_CON 0x17 -#define MIIM_CIS8204_EPHYCON_INIT 0x0006 -#define MIIM_CIS8204_EPHYCON_RGMII 0x1100 - -/* Cicada 8204 Serial LED Control Register */ -#define MIIM_CIS8204_SLED_CON 0x1b -#define MIIM_CIS8204_SLEDCON_INIT 0x1115 - -#define MIIM_GBIT_CON 0x09 -#define MIIM_GBIT_CON_ADVERT 0x0e00 - -/* Entry for Vitesse VSC8244 regs starts here */ -/* Vitesse VSC8244 Auxiliary Control/Status Register */ -#define MIIM_VSC8244_AUX_CONSTAT 0x1c -#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 -#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 -#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 -#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 -#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 - -/* Vitesse VSC8244 Extended PHY Control Register 1 */ -#define MIIM_VSC8244_EPHY_CON 0x17 -#define MIIM_VSC8244_EPHYCON_INIT 0x0006 - -/* Vitesse VSC8244 Serial LED Control Register */ -#define MIIM_VSC8244_LED_CON 0x1b -#define MIIM_VSC8244_LEDCON_INIT 0xF011 - -/* 88E1011 PHY Status Register */ -#define MIIM_88E1011_PHY_STATUS 0x11 -#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 -#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 -#define MIIM_88E1011_PHYSTAT_100 0x4000 -#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 -#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 -#define MIIM_88E1011_PHYSTAT_LINK 0x0400 - -#define MIIM_88E1011_PHY_SCR 0x10 -#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060 - -/* 88E1111 PHY LED Control Register */ -#define MIIM_88E1111_PHY_LED_CONTROL 24 -#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 -#define MIIM_88E1111_PHY_LED_COMBINE 0x411C - -/* 88E1145 Extended PHY Specific Control Register */ -#define MIIM_88E1145_PHY_EXT_CR 20 -#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 -#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 - -#define MIIM_88E1145_PHY_PAGE 29 -#define MIIM_88E1145_PHY_CAL_OV 30 - - -/* DM9161 Control register values */ -#define MIIM_DM9161_CR_STOP 0x0400 -#define MIIM_DM9161_CR_RSTAN 0x1200 - -#define MIIM_DM9161_SCR 0x10 -#define MIIM_DM9161_SCR_INIT 0x0610 - -/* DM9161 Specified Configuration and Status Register */ -#define MIIM_DM9161_SCSR 0x11 -#define MIIM_DM9161_SCSR_100F 0x8000 -#define MIIM_DM9161_SCSR_100H 0x4000 -#define MIIM_DM9161_SCSR_10F 0x2000 -#define MIIM_DM9161_SCSR_10H 0x1000 - -/* DM9161 10BT Configuration/Status */ -#define MIIM_DM9161_10BTCSR 0x12 -#define MIIM_DM9161_10BTCSR_INIT 0x7800 - -/* LXT971 Status 2 registers */ -#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ -#define MIIM_LXT971_SR2_SPEED_MASK 0x4200 -#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ -#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ - -/* DP83865 Control register values */ -#define MIIM_DP83865_CR_INIT 0x9200 - -/* DP83865 Link and Auto-Neg Status Register */ -#define MIIM_DP83865_LANR 0x11 -#define MIIM_DP83865_SPD_MASK 0x0018 -#define MIIM_DP83865_SPD_1000 0x0010 -#define MIIM_DP83865_SPD_100 0x0008 -#define MIIM_DP83865_DPX_FULL 0x0002 - -#define MIIM_READ_COMMAND 0x00000001 - -#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN - -#define MINFLR_INIT_SETTINGS 0x00000040 - -#define DMACTRL_INIT_SETTINGS 0x000000c3 -#define DMACTRL_GRS 0x00000010 -#define DMACTRL_GTS 0x00000008 - -#define TSTAT_CLEAR_THALT 0x80000000 -#define RSTAT_CLEAR_RHALT 0x00800000 - - -#define IEVENT_INIT_CLEAR 0xffffffff -#define IEVENT_BABR 0x80000000 -#define IEVENT_RXC 0x40000000 -#define IEVENT_BSY 0x20000000 -#define IEVENT_EBERR 0x10000000 -#define IEVENT_MSRO 0x04000000 -#define IEVENT_GTSC 0x02000000 -#define IEVENT_BABT 0x01000000 -#define IEVENT_TXC 0x00800000 -#define IEVENT_TXE 0x00400000 -#define IEVENT_TXB 0x00200000 -#define IEVENT_TXF 0x00100000 -#define IEVENT_IE 0x00080000 -#define IEVENT_LC 0x00040000 -#define IEVENT_CRL 0x00020000 -#define IEVENT_XFUN 0x00010000 -#define IEVENT_RXB0 0x00008000 -#define IEVENT_GRSC 0x00000100 -#define IEVENT_RXF0 0x00000080 - -#define IMASK_INIT_CLEAR 0x00000000 -#define IMASK_TXEEN 0x00400000 -#define IMASK_TXBEN 0x00200000 -#define IMASK_TXFEN 0x00100000 -#define IMASK_RXFEN0 0x00000080 - - -/* Default Attribute fields */ -#define ATTR_INIT_SETTINGS 0x000000c0 -#define ATTRELI_INIT_SETTINGS 0x00000000 - - -/* TxBD status field bits */ -#define TXBD_READY 0x8000 -#define TXBD_PADCRC 0x4000 -#define TXBD_WRAP 0x2000 -#define TXBD_INTERRUPT 0x1000 -#define TXBD_LAST 0x0800 -#define TXBD_CRC 0x0400 -#define TXBD_DEF 0x0200 -#define TXBD_HUGEFRAME 0x0080 -#define TXBD_LATECOLLISION 0x0080 -#define TXBD_RETRYLIMIT 0x0040 -#define TXBD_RETRYCOUNTMASK 0x003c -#define TXBD_UNDERRUN 0x0002 -#define TXBD_STATS 0x03ff - -/* RxBD status field bits */ -#define RXBD_EMPTY 0x8000 -#define RXBD_RO1 0x4000 -#define RXBD_WRAP 0x2000 -#define RXBD_INTERRUPT 0x1000 -#define RXBD_LAST 0x0800 -#define RXBD_FIRST 0x0400 -#define RXBD_MISS 0x0100 -#define RXBD_BROADCAST 0x0080 -#define RXBD_MULTICAST 0x0040 -#define RXBD_LARGE 0x0020 -#define RXBD_NONOCTET 0x0010 -#define RXBD_SHORT 0x0008 -#define RXBD_CRCERR 0x0004 -#define RXBD_OVERRUN 0x0002 -#define RXBD_TRUNCATED 0x0001 -#define RXBD_STATS 0x003f - -typedef struct txbd8 -{ - ushort status; /* Status Fields */ - ushort length; /* Buffer length */ - uint bufPtr; /* Buffer Pointer */ -} txbd8_t; - -typedef struct rxbd8 -{ - ushort status; /* Status Fields */ - ushort length; /* Buffer Length */ - uint bufPtr; /* Buffer Pointer */ -} rxbd8_t; - -typedef struct rmon_mib -{ - /* Transmit and Receive Counters */ - uint tr64; /* Transmit and Receive 64-byte Frame Counter */ - uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */ - uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */ - uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */ - uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */ - uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */ - uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */ - /* Receive Counters */ - uint rbyt; /* Receive Byte Counter */ - uint rpkt; /* Receive Packet Counter */ - uint rfcs; /* Receive FCS Error Counter */ - uint rmca; /* Receive Multicast Packet (Counter) */ - uint rbca; /* Receive Broadcast Packet */ - uint rxcf; /* Receive Control Frame Packet */ - uint rxpf; /* Receive Pause Frame Packet */ - uint rxuo; /* Receive Unknown OP Code */ - uint raln; /* Receive Alignment Error */ - uint rflr; /* Receive Frame Length Error */ - uint rcde; /* Receive Code Error */ - uint rcse; /* Receive Carrier Sense Error */ - uint rund; /* Receive Undersize Packet */ - uint rovr; /* Receive Oversize Packet */ - uint rfrg; /* Receive Fragments */ - uint rjbr; /* Receive Jabber */ - uint rdrp; /* Receive Drop */ - /* Transmit Counters */ - uint tbyt; /* Transmit Byte Counter */ - uint tpkt; /* Transmit Packet */ - uint tmca; /* Transmit Multicast Packet */ - uint tbca; /* Transmit Broadcast Packet */ - uint txpf; /* Transmit Pause Control Frame */ - uint tdfr; /* Transmit Deferral Packet */ - uint tedf; /* Transmit Excessive Deferral Packet */ - uint tscl; /* Transmit Single Collision Packet */ - /* (0x2_n700) */ - uint tmcl; /* Transmit Multiple Collision Packet */ - uint tlcl; /* Transmit Late Collision Packet */ - uint txcl; /* Transmit Excessive Collision Packet */ - uint tncl; /* Transmit Total Collision */ - - uint res2; - - uint tdrp; /* Transmit Drop Frame */ - uint tjbr; /* Transmit Jabber Frame */ - uint tfcs; /* Transmit FCS Error */ - uint txcf; /* Transmit Control Frame */ - uint tovr; /* Transmit Oversize Frame */ - uint tund; /* Transmit Undersize Frame */ - uint tfrg; /* Transmit Fragments Frame */ - /* General Registers */ - uint car1; /* Carry Register One */ - uint car2; /* Carry Register Two */ - uint cam1; /* Carry Register One Mask */ - uint cam2; /* Carry Register Two Mask */ -} rmon_mib_t; - -typedef struct tsec_hash_regs -{ - uint iaddr0; /* Individual Address Register 0 */ - uint iaddr1; /* Individual Address Register 1 */ - uint iaddr2; /* Individual Address Register 2 */ - uint iaddr3; /* Individual Address Register 3 */ - uint iaddr4; /* Individual Address Register 4 */ - uint iaddr5; /* Individual Address Register 5 */ - uint iaddr6; /* Individual Address Register 6 */ - uint iaddr7; /* Individual Address Register 7 */ - uint res1[24]; - uint gaddr0; /* Group Address Register 0 */ - uint gaddr1; /* Group Address Register 1 */ - uint gaddr2; /* Group Address Register 2 */ - uint gaddr3; /* Group Address Register 3 */ - uint gaddr4; /* Group Address Register 4 */ - uint gaddr5; /* Group Address Register 5 */ - uint gaddr6; /* Group Address Register 6 */ - uint gaddr7; /* Group Address Register 7 */ - uint res2[24]; -} tsec_hash_t; - -typedef struct tsec -{ - /* General Control and Status Registers (0x2_n000) */ - uint res000[4]; - - uint ievent; /* Interrupt Event */ - uint imask; /* Interrupt Mask */ - uint edis; /* Error Disabled */ - uint res01c; - uint ecntrl; /* Ethernet Control */ - uint minflr; /* Minimum Frame Length */ - uint ptv; /* Pause Time Value */ - uint dmactrl; /* DMA Control */ - uint tbipa; /* TBI PHY Address */ - - uint res034[3]; - uint res040[48]; - - /* Transmit Control and Status Registers (0x2_n100) */ - uint tctrl; /* Transmit Control */ - uint tstat; /* Transmit Status */ - uint res108; - uint tbdlen; /* Tx BD Data Length */ - uint res110[5]; - uint ctbptr; /* Current TxBD Pointer */ - uint res128[23]; - uint tbptr; /* TxBD Pointer */ - uint res188[30]; - /* (0x2_n200) */ - uint res200; - uint tbase; /* TxBD Base Address */ - uint res208[42]; - uint ostbd; /* Out of Sequence TxBD */ - uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */ - uint res2b8[18]; - - /* Receive Control and Status Registers (0x2_n300) */ - uint rctrl; /* Receive Control */ - uint rstat; /* Receive Status */ - uint res308; - uint rbdlen; /* RxBD Data Length */ - uint res310[4]; - uint res320; - uint crbptr; /* Current Receive Buffer Pointer */ - uint res328[6]; - uint mrblr; /* Maximum Receive Buffer Length */ - uint res344[16]; - uint rbptr; /* RxBD Pointer */ - uint res388[30]; - /* (0x2_n400) */ - uint res400; - uint rbase; /* RxBD Base Address */ - uint res408[62]; - - /* MAC Registers (0x2_n500) */ - uint maccfg1; /* MAC Configuration #1 */ - uint maccfg2; /* MAC Configuration #2 */ - uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */ - uint hafdup; /* Half-duplex */ - uint maxfrm; /* Maximum Frame */ - uint res514; - uint res518; - - uint res51c; - - uint miimcfg; /* MII Management: Configuration */ - uint miimcom; /* MII Management: Command */ - uint miimadd; /* MII Management: Address */ - uint miimcon; /* MII Management: Control */ - uint miimstat; /* MII Management: Status */ - uint miimind; /* MII Management: Indicators */ - - uint res538; - - uint ifstat; /* Interface Status */ - uint macstnaddr1; /* Station Address, part 1 */ - uint macstnaddr2; /* Station Address, part 2 */ - uint res548[46]; - - /* (0x2_n600) */ - uint res600[32]; - - /* RMON MIB Registers (0x2_n680-0x2_n73c) */ - rmon_mib_t rmon; - uint res740[48]; - - /* Hash Function Registers (0x2_n800) */ - tsec_hash_t hash; - - uint res900[128]; - - /* Pattern Registers (0x2_nb00) */ - uint resb00[62]; - uint attr; /* Default Attribute Register */ - uint attreli; /* Default Attribute Extract Length and Index */ - - /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */ - uint resc00[256]; -} tsec_t; - -#define TSEC_GIGABIT (1) - -/* This flag currently only has - * meaning if we're using the eTSEC */ -#define TSEC_REDUCED (1 << 1) - -struct tsec_private { - volatile tsec_t *regs; - volatile tsec_t *phyregs; - struct phy_info *phyinfo; - uint phyaddr; - u32 flags; - uint link; - uint duplexity; - uint speed; -}; - - -/* - * struct phy_cmd: A command for reading or writing a PHY register - * - * mii_reg: The register to read or write - * - * mii_data: For writes, the value to put in the register. - * A value of -1 indicates this is a read. - * - * funct: A function pointer which is invoked for each command. - * For reads, this function will be passed the value read - * from the PHY, and process it. - * For writes, the result of this function will be written - * to the PHY register - */ -struct phy_cmd { - uint mii_reg; - uint mii_data; - uint (*funct) (uint mii_reg, struct tsec_private* priv); -}; - -/* struct phy_info: a structure which defines attributes for a PHY - * - * id will contain a number which represents the PHY. During - * startup, the driver will poll the PHY to find out what its - * UID--as defined by registers 2 and 3--is. The 32-bit result - * gotten from the PHY will be shifted right by "shift" bits to - * discard any bits which may change based on revision numbers - * unimportant to functionality - * - * The struct phy_cmd entries represent pointers to an arrays of - * commands which tell the driver what to do to the PHY. - */ -struct phy_info { - uint id; - char *name; - uint shift; - /* Called to configure the PHY, and modify the controller - * based on the results */ - struct phy_cmd *config; - - /* Called when starting up the controller */ - struct phy_cmd *startup; - - /* Called when bringing down the controller */ - struct phy_cmd *shutdown; -}; - -#endif /* __TSEC_H */ |