diff options
Diffstat (limited to 'drivers/usb/host/sl811_usb.c')
| -rw-r--r-- | drivers/usb/host/sl811_usb.c | 737 |
1 files changed, 0 insertions, 737 deletions
diff --git a/drivers/usb/host/sl811_usb.c b/drivers/usb/host/sl811_usb.c deleted file mode 100644 index b0cdf0bc2c..0000000000 --- a/drivers/usb/host/sl811_usb.c +++ /dev/null @@ -1,737 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This code is based on linux driver for sl811hs chip, source at - * drivers/usb/host/sl811.c: - * - * SL811 Host Controller Interface driver for USB. - * - * Copyright (c) 2003/06, Courage Co., Ltd. - * - * Based on: - * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, - * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, - * Adam Richter, Gregory P. Smith; - * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com> - * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#ifdef CONFIG_USB_SL811HS -#include <mpc8xx.h> -#include <usb.h> -#include "sl811.h" - -#include "../board/kup/common/kup.h" - -#ifdef __PPC__ -# define EIEIO __asm__ volatile ("eieio") -#else -# define EIEIO /* nothing */ -#endif - -#define SL811_ADR (0x50000000) -#define SL811_DAT (0x50000001) - -#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) - -#ifdef SL811_DEBUG -static int debug = 9; -#endif - -static int root_hub_devnum = 0; -static struct usb_port_status rh_status = { 0 };/* root hub port status */ - -static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, - void *data, int buf_len, struct devrequest *cmd); - -static void sl811_write (__u8 index, __u8 data) -{ - *(volatile unsigned char *) (SL811_ADR) = index; - EIEIO; - *(volatile unsigned char *) (SL811_DAT) = data; - EIEIO; -} - -static __u8 sl811_read (__u8 index) -{ - __u8 data; - - *(volatile unsigned char *) (SL811_ADR) = index; - EIEIO; - data = *(volatile unsigned char *) (SL811_DAT); - EIEIO; - return (data); -} - -/* - * Read consecutive bytes of data from the SL811H/SL11H buffer - */ -static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size) -{ - *(volatile unsigned char *) (SL811_ADR) = offset; - EIEIO; - while (size--) { - *buf++ = *(volatile unsigned char *) (SL811_DAT); - EIEIO; - } -} - -/* - * Write consecutive bytes of data to the SL811H/SL11H buffer - */ -static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size) -{ - *(volatile unsigned char *) (SL811_ADR) = offset; - EIEIO; - while (size--) { - *(volatile unsigned char *) (SL811_DAT) = *buf++; - EIEIO; - } -} - -int usb_init_kup4x (void) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - int i; - unsigned char tmp; - - memctl = &immap->im_memctl; - memctl->memc_or7 = 0xFFFF8726; - memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */ - /* BP 14 low = USB ON */ - immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC); - /* PB 14 nomal port */ - immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC); - /* output */ - immap->im_cpm.cp_pbdir |= (BP_USB_VCC); - - puts ("USB: "); - - for (i = 0x10; i < 0xff; i++) { - sl811_write(i, i); - tmp = (sl811_read(i)); - if (tmp != i) { - printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp); - return (-1); - } - } - printf ("SL811 ready\n"); - return (0); -} - -/* - * This function resets SL811HS controller and detects the speed of - * the connecting device - * - * Return: 0 = no device attached; 1 = USB device attached - */ -static int sl811_hc_reset(void) -{ - int status ; - - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - - mdelay(20); - - /* Disable hardware SOF generation, clear all irq status. */ - sl811_write(SL811_CTRL1, 0); - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - status = sl811_read(SL811_INTRSTS); - - if (status & SL811_INTR_NOTPRESENT) { - /* Device is not present */ - PDEBUG(0, "Device not present\n"); - rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE); - rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; - sl811_write(SL811_INTR, SL811_INTR_INSRMV); - return 0; - } - - /* Send SOF to address 0, endpoint 0. */ - sl811_write(SL811_LEN_B, 0); - sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0)); - sl811_write(SL811_DEV_B, 0x00); - sl811_write(SL811_SOFLOW, SL811_12M_LOW); - - if (status & SL811_INTR_SPEED_FULL) { - /* full speed device connect directly to root hub */ - PDEBUG (0, "Full speed Device attached\n"); - - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - mdelay(20); - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_SOF); - - /* start the SOF or EOP */ - sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); - rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION; - rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED; - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - } else { - /* slow speed device connect directly to root-hub */ - PDEBUG(0, "Low speed Device attached\n"); - - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - mdelay(20); - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF); - - /* start the SOF or EOP */ - sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); - rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED; - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - } - - rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; - sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A); - - return 1; -} - -int usb_lowlevel_init(void) -{ - root_hub_devnum = 0; - sl811_hc_reset(); - return 0; -} - -int usb_lowlevel_stop(void) -{ - sl811_hc_reset(); - return 0; -} - -static int calc_needed_buswidth(int bytes, int need_preamble) -{ - return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048; -} - -static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len) -{ - __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE; - __u16 status = 0; - int err = 0, time_start = get_timer(0); - int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && - usb_pipeslow(pipe); - - if (len > 239) - return -1; - - if (usb_pipeout(pipe)) - ctrl |= SL811_USB_CTRL_DIR_OUT; - if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) - ctrl |= SL811_USB_CTRL_TOGGLE_1; - if (need_preamble) - ctrl |= SL811_USB_CTRL_PREAMBLE; - - sl811_write(SL811_INTRSTS, 0xff); - - while (err < 3) { - sl811_write(SL811_ADDR_A, 0x10); - sl811_write(SL811_LEN_A, len); - if (usb_pipeout(pipe) && len) - sl811_write_buf(0x10, buffer, len); - - if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && - sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble)) - ctrl |= SL811_USB_CTRL_SOF; - else - ctrl &= ~SL811_USB_CTRL_SOF; - - sl811_write(SL811_CTRL_A, ctrl); - while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) { - if (5*CFG_HZ < get_timer(time_start)) { - printf("USB transmit timed out\n"); - return -USB_ST_CRC_ERR; - } - } - - sl811_write(SL811_INTRSTS, 0xff); - status = sl811_read(SL811_STS_A); - - if (status & SL811_USB_STS_ACK) { - int remainder = sl811_read(SL811_CNT_A); - if (remainder) { - PDEBUG(0, "usb transfer remainder = %d\n", remainder); - len -= remainder; - } - if (usb_pipein(pipe) && len) - sl811_read_buf(0x10, buffer, len); - return len; - } - - if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK) - continue; - - PDEBUG(0, "usb transfer error %#x\n", (int)status); - err++; - } - - err = 0; - - if (status & SL811_USB_STS_ERROR) - err |= USB_ST_BUF_ERR; - if (status & SL811_USB_STS_TIMEOUT) - err |= USB_ST_CRC_ERR; - if (status & SL811_USB_STS_STALL) - err |= USB_ST_STALLED; - - return -err; -} - -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len) -{ - int dir_out = usb_pipeout(pipe); - int ep = usb_pipeendpoint(pipe); - int max = usb_maxpacket(dev, pipe); - int done = 0; - - PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n", - usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); - - dev->status = 0; - - sl811_write(SL811_DEV_A, usb_pipedevice(pipe)); - sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep)); - while (done < len) { - int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, - max > len - done ? len - done : max); - if (res < 0) { - dev->status = -res; - return res; - } - - if (!dir_out && res < max) /* short packet */ - break; - - done += res; - usb_dotoggle(dev, ep, dir_out); - } - - dev->act_len = done; - - return 0; -} - -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len,struct devrequest *setup) -{ - int done = 0; - int devnum = usb_pipedevice(pipe); - int ep = usb_pipeendpoint(pipe); - - dev->status = 0; - - if (devnum == root_hub_devnum) - return sl811_rh_submit_urb(dev, pipe, buffer, len, setup); - - PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n", - devnum, ep, buffer, len, (int)setup->requesttype, - (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64); - - sl811_write(SL811_DEV_A, devnum); - sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep)); - /* setup phase */ - usb_settoggle(dev, ep, 1, 0); - if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep), - (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) { - int dir_in = usb_pipein(pipe); - int max = usb_maxpacket(dev, pipe); - - /* data phase */ - sl811_write(SL811_PIDEP_A, - PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep)); - usb_settoggle(dev, ep, usb_pipeout(pipe), 1); - while (done < len) { - int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, - max > len - done ? len - done : max); - if (res < 0) { - PDEBUG(0, "status data failed!\n"); - dev->status = -res; - return 0; - } - done += res; - usb_dotoggle(dev, ep, usb_pipeout(pipe)); - if (dir_in && res < max) /* short packet */ - break; - } - - /* status phase */ - sl811_write(SL811_PIDEP_A, - PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep)); - usb_settoggle(dev, ep, !usb_pipeout(pipe), 1); - if (sl811_send_packet(dev, - !dir_in ? usb_rcvctrlpipe(dev, ep) : - usb_sndctrlpipe(dev, ep), - 0, 0) < 0) { - PDEBUG(0, "status phase failed!\n"); - dev->status = -1; - } - } else { - PDEBUG(0, "setup phase failed!\n"); - dev->status = -1; - } - - dev->act_len = done; - - return done; -} - -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len, int interval) -{ - PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe, - buffer, len, interval); - return -1; -} - -/* - * SL811 Virtual Root Hub - */ - -/* Device descriptor */ -static __u8 sl811_rh_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x10, /* __u16 bcdUSB; v1.1 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x02, /* __u8 iProduct; */ - 0x01, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 sl811_rh_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, - 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __u16 ep_wMaxPacketSize; */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -/* root hub class descriptor*/ -static __u8 sl811_rh_hub_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x01, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x50, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -/* - * helper routine for returning string descriptors in UTF-16LE - * input can actually be ISO-8859-1; ASCII is its 7-bit subset - */ -static int ascii2utf (char *s, u8 *utf, int utfmax) -{ - int retval; - - for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *s++; - *utf++ = 0; - } - return retval; -} - -/* - * root_hub_string is used by each host controller's root hub code, - * so that they're identified consistently throughout the system. - */ -static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) -{ - char buf [30]; - - /* assert (len > (2 * (sizeof (buf) + 1))); - assert (strlen (type) <= 8);*/ - - /* language ids */ - if (id == 0) { - *data++ = 4; *data++ = 3; /* 4 bytes data */ - *data++ = 0; *data++ = 0; /* some language id */ - return 4; - - /* serial number */ - } else if (id == 1) { - sprintf (buf, "%#x", serial); - - /* product description */ - } else if (id == 2) { - sprintf (buf, "USB %s Root Hub", type); - - /* id 3 == vendor description */ - - /* unsupported IDs --> "stall" */ - } else - return 0; - - ascii2utf (buf, data + 2, len - 2); - data [0] = 2 + strlen(buf) * 2; - data [1] = 3; - return data [0]; -} - -/* helper macro */ -#define OK(x) len = (x); break - -/* - * This function handles all USB request to the the virtual root hub - */ -static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, - void *data, int buf_len, struct devrequest *cmd) -{ - __u8 data_buf[16]; - __u8 *bufp = data_buf; - int len = 0; - int status = 0; - - __u16 bmRType_bReq; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - - if (usb_pipeint(pipe)) { - PDEBUG(0, "interrupt transfer unimplemented!\n"); - return 0; - } - - bmRType_bReq = cmd->requesttype | (cmd->request << 8); - wValue = le16_to_cpu (cmd->value); - wIndex = le16_to_cpu (cmd->index); - wLength = le16_to_cpu (cmd->length); - - PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n", - bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength); - - /* Request Destination: - without flags: Device, - USB_RECIP_INTERFACE: interface, - USB_RECIP_ENDPOINT: endpoint, - USB_TYPE_CLASS means HUB here, - USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here - */ - switch (bmRType_bReq) { - case RH_GET_STATUS: - *(__u16 *)bufp = cpu_to_le16(1); - OK(2); - - case RH_GET_STATUS | USB_RECIP_INTERFACE: - *(__u16 *)bufp = cpu_to_le16(0); - OK(2); - - case RH_GET_STATUS | USB_RECIP_ENDPOINT: - *(__u16 *)bufp = cpu_to_le16(0); - OK(2); - - case RH_GET_STATUS | USB_TYPE_CLASS: - *(__u32 *)bufp = cpu_to_le32(0); - OK(4); - - case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS: - *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus); - OK(4); - - case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT: - switch (wValue) { - case 1: - OK(0); - } - break; - - case RH_CLEAR_FEATURE | USB_TYPE_CLASS: - switch (wValue) { - case C_HUB_LOCAL_POWER: - OK(0); - - case C_HUB_OVER_CURRENT: - OK(0); - } - break; - - case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE; - OK(0); - - case USB_PORT_FEAT_SUSPEND: - rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND; - OK(0); - - case USB_PORT_FEAT_POWER: - rh_status.wPortStatus &= ~USB_PORT_STAT_POWER; - OK(0); - - case USB_PORT_FEAT_C_CONNECTION: - rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION; - OK(0); - - case USB_PORT_FEAT_C_ENABLE: - rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE; - OK(0); - - case USB_PORT_FEAT_C_SUSPEND: - rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND; - OK(0); - - case USB_PORT_FEAT_C_OVER_CURRENT: - rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT; - OK(0); - - case USB_PORT_FEAT_C_RESET: - rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET; - OK(0); - } - break; - - case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: - switch (wValue) { - case USB_PORT_FEAT_SUSPEND: - rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND; - OK(0); - - case USB_PORT_FEAT_RESET: - rh_status.wPortStatus |= USB_PORT_STAT_RESET; - rh_status.wPortChange = 0; - rh_status.wPortChange |= USB_PORT_STAT_C_RESET; - rh_status.wPortStatus &= ~USB_PORT_STAT_RESET; - rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; - OK(0); - - case USB_PORT_FEAT_POWER: - rh_status.wPortStatus |= USB_PORT_STAT_POWER; - OK(0); - - case USB_PORT_FEAT_ENABLE: - rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; - OK(0); - } - break; - - case RH_SET_ADDRESS: - root_hub_devnum = wValue; - OK(0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case USB_DT_DEVICE: - len = sizeof(sl811_rh_dev_des); - bufp = sl811_rh_dev_des; - OK(len); - - case USB_DT_CONFIG: - len = sizeof(sl811_rh_config_des); - bufp = sl811_rh_config_des; - OK(len); - - case USB_DT_STRING: - len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength); - if (len > 0) { - bufp = data; - OK(len); - } - - default: - status = -32; - } - break; - - case RH_GET_DESCRIPTOR | USB_TYPE_CLASS: - len = sizeof(sl811_rh_hub_des); - bufp = sl811_rh_hub_des; - OK(len); - - case RH_GET_CONFIGURATION: - bufp[0] = 0x01; - OK(1); - - case RH_SET_CONFIGURATION: - OK(0); - - default: - PDEBUG(1, "unsupported root hub command\n"); - status = -32; - } - - len = min(len, buf_len); - if (data != bufp) - memcpy(data, bufp, len); - - PDEBUG(5, "len = %d, status = %d\n", len, status); - - usb_dev->status = status; - usb_dev->act_len = len; - - return status == 0 ? len : status; -} - -#endif /* CONFIG_USB_SL811HS */ |