diff options
Diffstat (limited to 'dts/Bindings/arm/tegra')
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,nvec.txt | 21 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml | 50 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt | 132 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml | 216 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml | 40 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml | 97 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt | 17 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt | 18 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra20-pmc.txt | 300 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml | 74 | ||||
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt | 32 |
11 files changed, 477 insertions, 520 deletions
diff --git a/dts/Bindings/arm/tegra/nvidia,nvec.txt b/dts/Bindings/arm/tegra/nvidia,nvec.txt deleted file mode 100644 index 5ae601e7f5..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,nvec.txt +++ /dev/null @@ -1,21 +0,0 @@ -NVIDIA compliant embedded controller - -Required properties: -- compatible : should be "nvidia,nvec". -- reg : the iomem of the i2c slave controller -- interrupts : the interrupt line of the i2c slave controller -- clock-frequency : the frequency of the i2c bus -- gpios : the gpio used for ec request -- slave-addr: the i2c address of the slave controller -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - Tegra20/Tegra30: - - div-clk - - fast-clk - Tegra114: - - div-clk -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - i2c diff --git a/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml new file mode 100644 index 0000000000..36dbd0838f --- /dev/null +++ b/dts/Bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra CPU COMPLEX CLUSTER area + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + - Mikko Perttunen <mperttunen@nvidia.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + The Tegra CPU COMPLEX CLUSTER area contains memory-mapped + registers that initiate CPU frequency/voltage transitions. + +properties: + $nodename: + pattern: "ccplex@([0-9a-f]+)$" + + compatible: + enum: + - nvidia,tegra186-ccplex-cluster + - nvidia,tegra234-ccplex-cluster + + reg: + maxItems: 1 + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Specifies the BPMP node that needs to be queried to get + operating point data for all CPUs. + +additionalProperties: false + +required: + - compatible + - reg + - nvidia,bpmp + +examples: + - | + ccplex@e000000 { + compatible = "nvidia,tegra234-ccplex-cluster"; + reg = <0x0e000000 0x5ffff>; + nvidia,bpmp = <&bpmp>; + }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt deleted file mode 100644 index 2d89cdc39e..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt +++ /dev/null @@ -1,132 +0,0 @@ -NVIDIA Tegra Power Management Controller (PMC) - -Required properties: -- compatible: Should contain one of the following: - - "nvidia,tegra186-pmc": for Tegra186 - - "nvidia,tegra194-pmc": for Tegra194 -- reg: Must contain an (offset, length) pair of the register set for each - entry in reg-names. -- reg-names: Must include the following entries: - - "pmc" - - "wake" - - "aotag" - - "scratch" - - "misc" (Only for Tegra194) - -Optional properties: -- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal. -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value must be 2. - -Example: - -SoC DTSI: - - pmc@c3600000 { - compatible = "nvidia,tegra186-pmc"; - reg = <0 0x0c360000 0 0x10000>, - <0 0x0c370000 0 0x10000>, - <0 0x0c380000 0 0x10000>, - <0 0x0c390000 0 0x10000>; - reg-names = "pmc", "wake", "aotag", "scratch"; - }; - -Board DTS: - - pmc@c360000 { - nvidia,invert-interrupt; - }; - -== Pad Control == - -On Tegra SoCs a pad is a set of pins which are configured as a group. -The pin grouping is a fixed attribute of the hardware. The PMC can be -used to set pad power state and signaling voltage. A pad can be either -in active or power down mode. The support for power state and signaling -voltage configuration varies depending on the pad in question. 3.3 V and -1.8 V signaling voltages are supported on pins where software -controllable signaling voltage switching is available. - -Pad configurations are described with pin configuration nodes which -are placed under the pmc node and they are referred to by the pinctrl -client properties. For more information see -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. - -The following pads are present on Tegra186: -csia csib dsi mipi-bias -pex-clk-bias pex-clk3 pex-clk2 pex-clk1 -usb0 usb1 usb2 usb-bias -uart audio hsic dbg -hdmi-dp0 hdmi-dp1 pex-cntrl sdmmc2-hv -sdmmc4 cam dsib dsic -dsid csic csid csie -dsif spi ufs dmic-hv -edp sdmmc1-hv sdmmc3-hv conn -audio-hv ao-hv - -Required pin configuration properties: - - pins: A list of strings, each of which contains the name of a pad - to be configured. - -Optional pin configuration properties: - - low-power-enable: Configure the pad into power down mode - - low-power-disable: Configure the pad into active mode - - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or - TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. - The values are defined in - include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. - -Note: The power state can be configured on all of the above pads except - for ao-hv. Following pads have software configurable signaling - voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv, - ao-hv. - -Pad configuration state example: - pmc: pmc@7000e400 { - compatible = "nvidia,tegra186-pmc"; - reg = <0 0x0c360000 0 0x10000>, - <0 0x0c370000 0 0x10000>, - <0 0x0c380000 0 0x10000>, - <0 0x0c390000 0 0x10000>; - reg-names = "pmc", "wake", "aotag", "scratch"; - - ... - - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1-hv"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - - sdmmc1_1v8: sdmmc1-1v8 { - pins = "sdmmc1-hv"; - power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; - }; - - hdmi_off: hdmi-off { - pins = "hdmi"; - low-power-enable; - } - - hdmi_on: hdmi-on { - pins = "hdmi"; - low-power-disable; - } - }; - -Pinctrl client example: - sdmmc1: sdhci@3400000 { - ... - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; - pinctrl-0 = <&sdmmc1_3v3>; - pinctrl-1 = <&sdmmc1_1v8>; - }; - - ... - - sor0: sor@15540000 { - ... - pinctrl-0 = <&hdmi_off>; - pinctrl-1 = <&hdmi_on>; - pinctrl-names = "hdmi-on", "hdmi-off"; - }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml new file mode 100644 index 0000000000..ea4fbf6552 --- /dev/null +++ b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml @@ -0,0 +1,216 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra186-pmc + - nvidia,tegra194-pmc + - nvidia,tegra234-pmc + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + minItems: 4 + items: + - const: pmc + - const: wake + - const: aotag + - enum: [ scratch, misc ] + - const: misc + + interrupt-controller: true + + "#interrupt-cells": + description: Specifies the number of cells needed to encode an + interrupt source. The value must be 2. + const: 2 + + nvidia,invert-interrupt: + description: If present, inverts the PMU interrupt signal. + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-pmc + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + contains: + const: scratch + + - if: + properties: + compatible: + contains: + const: nvidia,tegra194-pmc + then: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 + + - if: + properties: + compatible: + contains: + const: nvidia,tegra234-pmc + then: + properties: + reg-names: + contains: + const: misc + +patternProperties: + "^[a-z0-9]+-[a-z0-9]+$": + if: + type: object + then: + description: | + These are pad configuration nodes. On Tegra SoCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power + state and signaling voltage. A pad can be either in active or + power down mode. The support for power state and signaling voltage + configuration varies depending on the pad in question. 3.3 V and + 1.8 V signaling voltages are supported on pins where software + controllable signaling voltage switching is available. + + Pad configurations are described with pin configuration nodes + which are placed under the pmc node and they are referred to by + the pinctrl client properties. For more information see + + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + + The following pads are present on Tegra186: + + csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2, + pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg, + hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib, + dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp, + sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv + + The following pads are present on Tegra194: + + csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2, + pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart, + pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12, + soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2, + hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst, + pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif, + spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn, + audio-hv, ao-hv + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain the name of the pad(s) to be + configured. + + low-power-enable: + description: Configure the pad into power down mode. + $ref: /schemas/types.yaml#/definitions/flag + + low-power-disable: + description: Configure the pad into active mode. + $ref: /schemas/types.yaml#/definitions/flag + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling + voltages. + + The values are defined in + + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h + + The power state can be configured on all of the above pads + except for ao-hv. Following pads have software configurable + signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, + audio-hv, ao-hv. + + phandle: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +dependencies: + interrupt-controller: ['#interrupt-cells'] + "#interrupt-cells": + required: + - interrupt-controller + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/reset/tegra186-reset.h> + + pmc@c3600000 { + compatible = "nvidia,tegra186-pmc"; + reg = <0x0c360000 0x10000>, + <0x0c370000 0x10000>, + <0x0c380000 0x10000>, + <0x0c390000 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + nvidia,invert-interrupt; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + }; + + sdmmc1: mmc@3400000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x03400000 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_SDMMC1>, + <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>; + clock-names = "sdhci", "tmclk"; + resets = <&bpmp TEGRA186_RESET_SDMMC1>; + reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_SDMMC1>; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/dts/Bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml new file mode 100644 index 0000000000..5e0f1dc542 --- /dev/null +++ b/dts/Bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 AXI2APB bridge + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + +properties: + $nodename: + pattern: "^axi2apb@([0-9a-f]+)$" + + compatible: + enum: + - nvidia,tegra194-axi2apb + + reg: + maxItems: 6 + description: Physical base address and length of registers for all bridges + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + axi2apb: axi2apb@2390000 { + compatible = "nvidia,tegra194-axi2apb"; + reg = <0x02390000 0x1000>, + <0x023a0000 0x1000>, + <0x023b0000 0x1000>, + <0x023c0000 0x1000>, + <0x023d0000 0x1000>, + <0x023e0000 0x1000>; + }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml new file mode 100644 index 0000000000..d9c54c32c6 --- /dev/null +++ b/dts/Bindings/arm/tegra/nvidia,tegra194-cbb.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 CBB 1.0 + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + +description: |+ + The Control Backbone (CBB) is comprised of the physical path from an + initiator to a target's register configuration space. CBB 1.0 has + multiple hierarchical sub-NOCs (Network-on-Chip) and connects various + initiators and targets using different bridges like AXIP2P, AXI2APB. + + This driver handles errors due to illegal register accesses reported + by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs + "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC" + which is the main NOC. + + By default, the access issuing initiator is informed about the error + using SError or Data Abort exception unless the ERD (Error Response + Disable) is enabled/set for that initiator. If the ERD is enabled, then + SError or Data Abort is masked and the error is reported with interrupt. + + - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the + errors due to illegal accesses from CCPLEX are reported by interrupts. + If ERD is not set, then error is reported by SError. + - For other initiators, the ERD is disabled. So, the access issuing + initiator is informed about the illegal access by Data Abort exception. + In addition, an interrupt is also generated to CCPLEX. These initiators + include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and + engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder + engine) etc which can initiate transactions. + + The driver prints relevant debug information like Error Code, Error + Description, Master, Address, AXI ID, Cache, Protection, Security Group + etc on receiving error notification. + +properties: + $nodename: + pattern: "^[a-z]+-noc@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra194-cbb-noc + - nvidia,tegra194-aon-noc + - nvidia,tegra194-bpmp-noc + - nvidia,tegra194-rce-noc + - nvidia,tegra194-sce-noc + + reg: + maxItems: 1 + + interrupts: + description: + CCPLEX receives secure or nonsecure interrupt depending on error type. + A secure interrupt is received for SEC(firewall) & SLV errors and a + non-secure interrupt is received for TMO & DEC errors. + items: + - description: non-secure interrupt + - description: secure interrupt + + nvidia,axi2apb: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies the node having all axi2apb bridges which need to be checked + for any error logged in their status register. + + nvidia,apbmisc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies the apbmisc node which need to be used for reading the ERD + register. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - nvidia,apbmisc + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cbb-noc@2300000 { + compatible = "nvidia,tegra194-cbb-noc"; + reg = <0x02300000 0x1000>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt deleted file mode 100644 index 9a4295b545..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-ahb.txt +++ /dev/null @@ -1,17 +0,0 @@ -NVIDIA Tegra AHB - -Required properties: -- compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For - Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain - '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124, - tegra132, or tegra210. -- reg : Should contain 1 register ranges(address and length). For - Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004 - 0x10c>. For Tegra124, Tegra132 and Tegra210 chips, the value should - be be <0x6000c000 0x150>. - -Example (for a Tegra20 chip): - ahb: ahb@6000c004 { - compatible = "nvidia,tegra20-ahb"; - reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ - }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt deleted file mode 100644 index a855c1bffc..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt +++ /dev/null @@ -1,18 +0,0 @@ -NVIDIA Tegra Flow Controller - -Required properties: -- compatible: Should contain one of the following: - - "nvidia,tegra20-flowctrl": for Tegra20 - - "nvidia,tegra30-flowctrl": for Tegra30 - - "nvidia,tegra114-flowctrl": for Tegra114 - - "nvidia,tegra124-flowctrl": for Tegra124 - - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132 - - "nvidia,tegra210-flowctrl": for Tegra210 -- reg: Should contain one register range (address and length) - -Example: - - flow-controller@60007000 { - compatible = "nvidia,tegra20-flowctrl"; - reg = <0x60007000 0x1000>; - }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.txt deleted file mode 100644 index cb12f33a24..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ /dev/null @@ -1,300 +0,0 @@ -NVIDIA Tegra Power Management Controller (PMC) - -== Power Management Controller Node == - -The PMC block interacts with an external Power Management Unit. The PMC -mostly controls the entry and exit of the system from different sleep -modes. It provides power-gating controllers for SoC and CPU power-islands. - -Required properties: -- name : Should be pmc -- compatible : Should contain one of the following: - For Tegra20 must contain "nvidia,tegra20-pmc". - For Tegra30 must contain "nvidia,tegra30-pmc". - For Tegra114 must contain "nvidia,tegra114-pmc" - For Tegra124 must contain "nvidia,tegra124-pmc" - For Tegra132 must contain "nvidia,tegra124-pmc" - For Tegra210 must contain "nvidia,tegra210-pmc" -- reg : Offset and length of the register set for the device -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - "pclk" (The Tegra clock of that name), - "clk32k_in" (The 32KHz clock input to Tegra). - -Optional properties: -- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. - The PMU is an external Power Management Unit, whose interrupt output - signal is fed into the PMC. This signal is optionally inverted, and then - fed into the ARM GIC. The PMC is not involved in the detection or - handling of this interrupt signal, merely its inversion. -- nvidia,suspend-mode : The suspend mode that the platform should use. - Valid values are 0, 1 and 2: - 0 (LP0): CPU + Core voltage off and DRAM in self-refresh - 1 (LP1): CPU voltage off and DRAM in self-refresh - 2 (LP2): CPU voltage off -- nvidia,core-power-req-active-high : Boolean, core power request active-high -- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high -- nvidia,combined-power-req : Boolean, combined power request for CPU & Core -- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC) - is enabled. - -Required properties when nvidia,suspend-mode is specified: -- nvidia,cpu-pwr-good-time : CPU power good time in uS. -- nvidia,cpu-pwr-off-time : CPU power off time in uS. -- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time> - Core power good time in uS. -- nvidia,core-pwr-off-time : Core power off time in uS. - -Required properties when nvidia,suspend-mode=<0>: -- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector - The LP0 vector contains the warm boot code that is executed by AVP when - resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7 - processor and always being the first boot processor when chip is power on - or resume from deep sleep mode. When the system is resumed from the deep - sleep mode, the warm boot code will restore some PLLs, clocks and then - bring up CPU0 for resuming the system. - -Hardware-triggered thermal reset: -On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists, -hardware-triggered thermal reset will be enabled. - -Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are - described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the - Tegra K1 Technical Reference Manual. -- nvidia,bus-addr : Bus address of the PMU on the I2C bus -- nvidia,reg-addr : I2C register address to write poweroff command to -- nvidia,reg-data : Poweroff command to write to PMU - -Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command. - Defaults to 0. Valid values are described in section 12.5.2 - "Pinmux Support" of the Tegra4 Technical Reference Manual. - -Optional nodes: -- powergates : This node contains a hierarchy of power domain nodes, which - should match the powergates on the Tegra SoC. See "Powergate - Nodes" below. - -Example: - -/ SoC dts including file -pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - clocks = <&tegra_car 110>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <100>; - nvidia,core-pwr-good-time = <3845 3845>; - nvidia,core-pwr-off-time = <458>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - nvidia,lp0-vec = <0xbdffd000 0x2000>; -}; - -/ Tegra board dts file -{ - ... - pmc@7000f400 { - i2c-thermtrip { - nvidia,i2c-controller-id = <4>; - nvidia,bus-addr = <0x40>; - nvidia,reg-addr = <0x36>; - nvidia,reg-data = <0x2>; - }; - }; - ... - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - ... -}; - - -== Powergate Nodes == - -Each of the powergate nodes represents a power-domain on the Tegra SoC -that can be power-gated by the Tegra PMC. The name of the powergate node -should be one of the below. Note that not every powergate is applicable -to all Tegra devices and the following list shows which powergates are -applicable to which devices. Please refer to the Tegra TRM for more -details on the various powergates. - - Name Description Devices Applicable - 3d 3D Graphics Tegra20/114/124/210 - 3d0 3D Graphics 0 Tegra30 - 3d1 3D Graphics 1 Tegra30 - aud Audio Tegra210 - dfd Debug Tegra210 - dis Display A Tegra114/124/210 - disb Display B Tegra114/124/210 - heg 2D Graphics Tegra30/114/124/210 - iram Internal RAM Tegra124/210 - mpe MPEG Encode All - nvdec NVIDIA Video Decode Engine Tegra210 - nvjpg NVIDIA JPEG Engine Tegra210 - pcie PCIE Tegra20/30/124/210 - sata SATA Tegra30/124/210 - sor Display interfaces Tegra124/210 - ve2 Video Encode Engine 2 Tegra210 - venc Video Encode Engine All - vdec Video Decode Engine Tegra20/30/114/124 - vic Video Imaging Compositor Tegra124/210 - xusba USB Partition A Tegra114/124/210 - xusbb USB Partition B Tegra114/124/210 - xusbc USB Partition C Tegra114/124/210 - -Required properties: - - clocks: Must contain an entry for each clock required by the PMC for - controlling a power-gate. See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each reset required by the PMC for - controlling a power-gate. See ../reset/reset.txt for details. - - #power-domain-cells: Must be 0. - -Example: - - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - powergates { - pd_audio: aud { - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - resets = <&tegra_car 198>; - #power-domain-cells = <0>; - }; - }; - }; - - -== Powergate Clients == - -Hardware blocks belonging to a power domain should contain a "power-domains" -property that is a phandle pointing to the corresponding powergate node. - -Example: - - adma: adma@702e2000 { - ... - power-domains = <&pd_audio>; - ... - }; - -== Pad Control == - -On Tegra SoCs a pad is a set of pins which are configured as a group. -The pin grouping is a fixed attribute of the hardware. The PMC can be -used to set pad power state and signaling voltage. A pad can be either -in active or power down mode. The support for power state and signaling -voltage configuration varies depending on the pad in question. 3.3 V and -1.8 V signaling voltages are supported on pins where software -controllable signaling voltage switching is available. - -The pad configuration state nodes are placed under the pmc node and they -are referred to by the pinctrl client properties. For more information -see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. -The pad name should be used as the value of the pins property in pin -configuration nodes. - -The following pads are present on Tegra124 and Tegra132: -audio bb cam comp -csia csb cse dsi -dsib dsic dsid hdmi -hsic hv lvds mipi-bias -nand pex-bias pex-clk1 pex-clk2 -pex-cntrl sdmmc1 sdmmc3 sdmmc4 -sys_ddc uart usb0 usb1 -usb2 usb_bias - -The following pads are present on Tegra210: -audio audio-hv cam csia -csib csic csid csie -csif dbg debug-nonao dmic -dp dsi dsib dsic -dsid emmc emmc2 gpio -hdmi hsic lvds mipi-bias -pex-bias pex-clk1 pex-clk2 pex-cntrl -sdmmc1 sdmmc3 spi spi-hv -uart usb0 usb1 usb2 -usb3 usb-bias - -Required pin configuration properties: - - pins: Must contain name of the pad(s) to be configured. - -Optional pin configuration properties: - - low-power-enable: Configure the pad into power down mode - - low-power-disable: Configure the pad into active mode - - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 - or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. - The values are defined in - include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. - -Note: The power state can be configured on all of the Tegra124 and - Tegra132 pads. None of the Tegra124 or Tegra132 pads support - signaling voltage switching. - -Note: All of the listed Tegra210 pads except pex-cntrl support power - state configuration. Signaling voltage switching is supported on - following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio, - pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart. - -Pad configuration state example: - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - ... - - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; - }; - - sdmmc1_1v8: sdmmc1-1v8 { - pins = "sdmmc1"; - power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; - }; - - hdmi_off: hdmi-off { - pins = "hdmi"; - low-power-enable; - } - - hdmi_on: hdmi-on { - pins = "hdmi"; - low-power-disable; - } - }; - -Pinctrl client example: - sdmmc1: sdhci@700b0000 { - ... - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; - pinctrl-0 = <&sdmmc1_3v3>; - pinctrl-1 = <&sdmmc1_1v8>; - }; - ... - sor@54540000 { - ... - pinctrl-0 = <&hdmi_off>; - pinctrl-1 = <&hdmi_on>; - pinctrl-names = "hdmi-on", "hdmi-off"; - }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml new file mode 100644 index 0000000000..fcdf031313 --- /dev/null +++ b/dts/Bindings/arm/tegra/nvidia,tegra234-cbb.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra CBB 2.0 + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + +description: |+ + The Control Backbone (CBB) is comprised of the physical path from an + initiator to a target's register configuration space. CBB 2.0 consists + of multiple sub-blocks connected to each other to create a topology. + The Tegra234 SoC has different fabrics based on CBB 2.0 architecture + which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and + "CBB central fabric". + + In CBB 2.0, each initiator which can issue transactions connects to a + Root Master Node (MN) before it connects to any other element of the + fabric. Each Root MN contains a Error Monitor (EM) which detects and + logs error. Interrupts from various EM blocks are collated by Error + Notifier (EN) which is per fabric and presents a single interrupt from + fabric to the SoC interrupt controller. + + The driver handles errors from CBB due to illegal register accesses + and prints debug information about failed transaction on receiving + the interrupt from EN. Debug information includes Error Code, Error + Description, MasterID, Fabric, SlaveID, Address, Cache, Protection, + Security Group etc on receiving error notification. + + If the Error Response Disable (ERD) is set/enabled for an initiator, + then SError or Data abort exception error response is masked and an + interrupt is used for reporting errors due to illegal accesses from + that initiator. The value returned on read failures is '0xFFFFFFFF' + for compatibility with PCIE. + +properties: + $nodename: + pattern: "^[a-z]+-fabric@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra234-aon-fabric + - nvidia,tegra234-bpmp-fabric + - nvidia,tegra234-cbb-fabric + - nvidia,tegra234-dce-fabric + - nvidia,tegra234-rce-fabric + - nvidia,tegra234-sce-fabric + + reg: + maxItems: 1 + + interrupts: + items: + - description: secure interrupt from error notifier + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cbb-fabric@1300000 { + compatible = "nvidia,tegra234-cbb-fabric"; + reg = <0x13a00000 0x400000>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt b/dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt deleted file mode 100644 index ea670a5d7e..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra30-actmon.txt +++ /dev/null @@ -1,32 +0,0 @@ -NVIDIA Tegra Activity Monitor - -The activity monitor block collects statistics about the behaviour of other -components in the system. This information can be used to derive the rate at -which the external memory needs to be clocked in order to serve all requests -from the monitored clients. - -Required properties: -- compatible: should be "nvidia,tegra<chip>-actmon" -- reg: offset and length of the register set for the device -- interrupts: standard interrupt property -- clocks: Must contain a phandle and clock specifier pair for each entry in -clock-names. See ../../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - actmon - - emc -- resets: Must contain an entry for each entry in reset-names. See -../../reset/reset.txt for details. -- reset-names: Must include the following entries: - - actmon - -Example: - actmon@6000c800 { - compatible = "nvidia,tegra124-actmon"; - reg = <0x0 0x6000c800 0x0 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_ACTMON>, - <&tegra_car TEGRA124_CLK_EMC>; - clock-names = "actmon", "emc"; - resets = <&tegra_car 119>; - reset-names = "actmon"; - }; |