diff options
Diffstat (limited to 'dts/Bindings/clock')
42 files changed, 860 insertions, 457 deletions
diff --git a/dts/Bindings/clock/arm,syscon-icst.yaml b/dts/Bindings/clock/arm,syscon-icst.yaml new file mode 100644 index 0000000000..444aeea27d --- /dev/null +++ b/dts/Bindings/clock/arm,syscon-icst.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM System Controller ICST Clocks + +maintainers: + - Linus Walleij <linusw@kernel.org> + +description: | + The ICS525 and ICS307 oscillators are produced by Integrated + Devices Technology (IDT). ARM integrated these oscillators deeply into their + reference designs by adding special control registers that manage such + oscillators to their system controllers. + + The various ARM system controllers contain logic to serialize and initialize + an ICST clock request after a write to the 32 bit register at an offset + into the system controller. Furthermore, to even be able to alter one of + these frequencies, the system controller must first be unlocked by + writing a special token to another offset in the system controller. + + Some ARM hardware contain special versions of the serial interface that only + connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to + different values and sometimes also hard-wires the output divider. They + therefore have special compatible strings as per this table (the OD value is + the value on the pins, not the resulting output divider). + + In the core modules and logic tiles, the ICST is a configurable clock fed + from a 24 MHz clock on the motherboard (usually the main crystal) used for + generating e.g. video clocks. It is located on the core module and there is + only one of these. This clock node must be a subnode of the core module. + + Hardware variant RDW OD VDW + + Integrator/AP 22 1 Bit 8 0, rest variable + integratorap-cm + + Integrator/AP 46 3 Bit 8 0, rest variable + integratorap-sys + + Integrator/AP 22 or 1 17 or (33 or 25 MHz) + integratorap-pci 14 1 14 + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-core + + Integrator/CP 22 variable Bit 8 0, rest variable + integratorcp-cm-mem + + The ICST oscillator must be provided inside a system controller node. + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - arm,syscon-icst525 + - arm,syscon-icst307 + - arm,syscon-icst525-integratorap-cm + - arm,syscon-icst525-integratorap-sys + - arm,syscon-icst525-integratorap-pci + - arm,syscon-icst525-integratorcp-cm-core + - arm,syscon-icst525-integratorcp-cm-mem + - arm,integrator-cm-auxosc + - arm,versatile-cm-auxosc + - arm,impd-vco1 + - arm,impd-vco2 + + clocks: + description: Parent clock for the ICST VCO + maxItems: 1 + + clock-output-names: + maxItems: 1 + + lock-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the unlocking register for the oscillator + + vco-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: Offset to the VCO register for the oscillator + +required: + - "#clock-cells" + - compatible + - clocks + +examples: + - | + vco1: clock { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + +... diff --git a/dts/Bindings/clock/arm-integrator.txt b/dts/Bindings/clock/arm-integrator.txt deleted file mode 100644 index 11f5f95f57..0000000000 --- a/dts/Bindings/clock/arm-integrator.txt +++ /dev/null @@ -1,34 +0,0 @@ -Clock bindings for ARM Integrator and Versatile Core Module clocks - -Auxiliary Oscillator Clock - -This is a configurable clock fed from a 24 MHz chrystal, -used for generating e.g. video clocks. It is located on the -core module and there is only one of these. - -This clock node *must* be a subnode of the core module, since -it obtains the base address for it's address range from its -parent node. - - -Required properties: -- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc" -- #clock-cells: must be <0> - -Optional properties: -- clocks: parent clock(s) - -Example: - -core-module@10000000 { - xtal24mhz: xtal24mhz@24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - auxosc: cm_aux_osc@25M { - #clock-cells = <0>; - compatible = "arm,integrator-cm-auxosc"; - clocks = <&xtal24mhz>; - }; -}; diff --git a/dts/Bindings/clock/arm-syscon-icst.txt b/dts/Bindings/clock/arm-syscon-icst.txt deleted file mode 100644 index 4cd8174203..0000000000 --- a/dts/Bindings/clock/arm-syscon-icst.txt +++ /dev/null @@ -1,70 +0,0 @@ -ARM System Controller ICST clocks - -The ICS525 and ICS307 oscillators are produced by Integrated Devices -Technology (IDT). ARM integrated these oscillators deeply into their -reference designs by adding special control registers that manage such -oscillators to their system controllers. - -The various ARM system controllers contain logic to serialize and initialize -an ICST clock request after a write to the 32 bit register at an offset -into the system controller. Furthermore, to even be able to alter one of -these frequencies, the system controller must first be unlocked by -writing a special token to another offset in the system controller. - -Some ARM hardware contain special versions of the serial interface that only -connects the low 8 bits of the VDW (missing one bit), hardwires RDW to -different values and sometimes also hardwire the output divider. They -therefore have special compatible strings as per this table (the OD value is -the value on the pins, not the resulting output divider): - -Hardware variant: RDW OD VDW - -Integrator/AP 22 1 Bit 8 0, rest variable -integratorap-cm - -Integrator/AP 46 3 Bit 8 0, rest variable -integratorap-sys - -Integrator/AP 22 or 1 17 or (33 or 25 MHz) -integratorap-pci 14 1 14 - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-core - -Integrator/CP 22 variable Bit 8 0, rest variable -integratorcp-cm-mem - -The ICST oscillator must be provided inside a system controller node. - -Required properties: -- compatible: must be one of - "arm,syscon-icst525" - "arm,syscon-icst307" - "arm,syscon-icst525-integratorap-cm" - "arm,syscon-icst525-integratorap-sys" - "arm,syscon-icst525-integratorap-pci" - "arm,syscon-icst525-integratorcp-cm-core" - "arm,syscon-icst525-integratorcp-cm-mem" -- lock-offset: the offset address into the system controller where the - unlocking register is located -- vco-offset: the offset address into the system controller where the - ICST control register is located (even 32 bit address) -- #clock-cells: must be <0> -- clocks: parent clock, since the ICST needs a parent clock to derive its - frequency from, this attribute is compulsory. - -Example: - -syscon: syscon@10000000 { - compatible = "syscon"; - reg = <0x10000000 0x1000>; - - oscclk0: osc0@c { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x0c>; - clocks = <&xtal24mhz>; - }; - (...) -}; diff --git a/dts/Bindings/clock/clock-bindings.txt b/dts/Bindings/clock/clock-bindings.txt index b646bbcf7f..8a55fdcf96 100644 --- a/dts/Bindings/clock/clock-bindings.txt +++ b/dts/Bindings/clock/clock-bindings.txt @@ -94,7 +94,7 @@ clock is connected to output 0 of the &ref. /* external oscillator */ osc: oscillator { compatible = "fixed-clock"; - #clock-cells = <1>; + #clock-cells = <0>; clock-frequency = <32678>; clock-output-names = "osc"; }; diff --git a/dts/Bindings/clock/fsl,plldig.yaml b/dts/Bindings/clock/fsl,plldig.yaml index c8350030b3..a203d5d498 100644 --- a/dts/Bindings/clock/fsl,plldig.yaml +++ b/dts/Bindings/clock/fsl,plldig.yaml @@ -21,6 +21,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + '#clock-cells': const: 0 @@ -41,6 +44,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + examples: # Display PIXEL Clock node: - | diff --git a/dts/Bindings/clock/imx8mm-clock.txt b/dts/Bindings/clock/imx8mm-clock.txt deleted file mode 100644 index 8e4ab9e619..0000000000 --- a/dts/Bindings/clock/imx8mm-clock.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Clock bindings for NXP i.MX8M Mini - -Required properties: -- compatible: Should be "fsl,imx8mm-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include the following entries: - - "osc_32k" - - "osc_24m" - - "clk_ext1" - - "clk_ext2" - - "clk_ext3" - - "clk_ext4" - -clk: clock-controller@30380000 { - compatible = "fsl,imx8mm-ccm"; - reg = <0x0 0x30380000 0x0 0x10000>; - #clock-cells = <1>; - clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, - <&clk_ext3>, <&clk_ext4>; - clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", - "clk_ext3", "clk_ext4"; -}; - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h -for the full list of i.MX8M Mini clock IDs. diff --git a/dts/Bindings/clock/imx8mm-clock.yaml b/dts/Bindings/clock/imx8mm-clock.yaml new file mode 100644 index 0000000000..ec830db136 --- /dev/null +++ b/dts/Bindings/clock/imx8mm-clock.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8mm-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Mini Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Mini clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: fsl,imx8mm-ccm + + reg: + maxItems: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: osc_32k + - const: osc_24m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h + for the full list of i.MX8M Mini clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + +... diff --git a/dts/Bindings/clock/imx8mn-clock.yaml b/dts/Bindings/clock/imx8mn-clock.yaml index cd0b8a3413..bdaa29616a 100644 --- a/dts/Bindings/clock/imx8mn-clock.yaml +++ b/dts/Bindings/clock/imx8mn-clock.yaml @@ -40,7 +40,7 @@ properties: '#clock-cells': const: 1 - description: | + description: The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h for the full list of i.MX8M Nano clock IDs. @@ -52,12 +52,14 @@ required: - clock-names - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | clk: clock-controller@30380000 { compatible = "fsl,imx8mn-ccm"; - reg = <0x0 0x30380000 0x0 0x10000>; + reg = <0x30380000 0x10000>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; @@ -65,48 +67,4 @@ examples: "clk_ext2", "clk_ext3", "clk_ext4"; }; - # Required external clocks for Clock Control Module node: - - | - osc_32k: clock-osc-32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "osc_32k"; - }; - - osc_24m: clock-osc-24m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc_24m"; - }; - - clk_ext1: clock-ext1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext1"; - }; - - clk_ext2: clock-ext2 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext2"; - }; - - clk_ext3: clock-ext3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext3"; - }; - - clk_ext4: clock-ext4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency= <133000000>; - clock-output-names = "clk_ext4"; - }; - ... diff --git a/dts/Bindings/clock/imx8mp-clock.yaml b/dts/Bindings/clock/imx8mp-clock.yaml index 89aee63c90..4351a1dbb4 100644 --- a/dts/Bindings/clock/imx8mp-clock.yaml +++ b/dts/Bindings/clock/imx8mp-clock.yaml @@ -52,6 +52,8 @@ required: - clock-names - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/dts/Bindings/clock/imx8mq-clock.txt b/dts/Bindings/clock/imx8mq-clock.txt deleted file mode 100644 index 52de8263e0..0000000000 --- a/dts/Bindings/clock/imx8mq-clock.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Clock bindings for NXP i.MX8M Quad - -Required properties: -- compatible: Should be "fsl,imx8mq-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include the following entries: - - "ckil" - - "osc_25m" - - "osc_27m" - - "clk_ext1" - - "clk_ext2" - - "clk_ext3" - - "clk_ext4" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h -for the full list of i.MX8M Quad clock IDs. diff --git a/dts/Bindings/clock/imx8mq-clock.yaml b/dts/Bindings/clock/imx8mq-clock.yaml new file mode 100644 index 0000000000..05d7d1471e --- /dev/null +++ b/dts/Bindings/clock/imx8mq-clock.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8mq-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Quad Clock Control Module Binding + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +description: | + NXP i.MX8M Quad clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + const: fsl,imx8mq-ccm + + reg: + maxItems: 1 + + clocks: + items: + - description: 32k osc + - description: 25m osc + - description: 27m osc + - description: ext1 clock input + - description: ext2 clock input + - description: ext3 clock input + - description: ext4 clock input + + clock-names: + items: + - const: ckil + - const: osc_25m + - const: osc_27m + - const: clk_ext1 + - const: clk_ext2 + - const: clk_ext3 + - const: clk_ext4 + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h + for the full list of i.MX8M Quad clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + clk: clock-controller@30380000 { + compatible = "fsl,imx8mq-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc_25m>, <&osc_27m>, + <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "ckil", "osc_25m", "osc_27m", + "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + +... diff --git a/dts/Bindings/clock/marvell,mmp2-clock.yaml b/dts/Bindings/clock/marvell,mmp2-clock.yaml new file mode 100644 index 0000000000..e2b6ac96bb --- /dev/null +++ b/dts/Bindings/clock/marvell,mmp2-clock.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 and MMP3 Clock Controller + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The clock subsystem on MMP2 or MMP3 generates and supplies clock to various + controllers within the SoC. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. + +properties: + compatible: + enum: + - marvell,mmp2-clock # controller compatible with MMP2 SoC + - marvell,mmp3-clock # controller compatible with MMP3 SoC + + reg: + items: + - description: MPMU register region + - description: APMU register region + - description: APBC register region + + reg-names: + items: + - const: mpmu + - const: apmu + - const: apbc + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/marvell,mmp2.txt b/dts/Bindings/clock/marvell,mmp2.txt deleted file mode 100644 index 23b52dc022..0000000000 --- a/dts/Bindings/clock/marvell,mmp2.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Marvell MMP2 Clock Controller - -The MMP2 clock subsystem generates and supplies clock to various -controllers within the MMP2 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "marvell,mmp2-clock" - controller compatible with MMP2 SoC. - -- reg: physical base address of the clock subsystem and length of memory mapped - region. There are 3 places in SOC has clock control logic: - "mpmu", "apmu", "apbc". So three reg spaces need to be defined. - -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. diff --git a/dts/Bindings/clock/milbeaut-clock.yaml b/dts/Bindings/clock/milbeaut-clock.yaml index f0b804a7f0..0e8b077104 100644 --- a/dts/Bindings/clock/milbeaut-clock.yaml +++ b/dts/Bindings/clock/milbeaut-clock.yaml @@ -35,6 +35,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + examples: # Clock controller node: - | diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml index 3647007f82..eacccc88bb 100644 --- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml +++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml @@ -68,6 +68,8 @@ required: - nvmem-cell-names - '#thermal-sensor-cells' +additionalProperties: false + examples: - | clock-controller@900000 { diff --git a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml index 89c6e070e7..98572b4a9b 100644 --- a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml +++ b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml @@ -40,6 +40,8 @@ required: - '#clock-cells' - '#reset-cells' +additionalProperties: false + examples: - | clock-controller@1800000 { diff --git a/dts/Bindings/clock/qcom,gcc-msm8996.yaml b/dts/Bindings/clock/qcom,gcc-msm8996.yaml index 18e4e77b8c..5a5b2214f0 100644 --- a/dts/Bindings/clock/qcom,gcc-msm8996.yaml +++ b/dts/Bindings/clock/qcom,gcc-msm8996.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | clock-controller@300000 { diff --git a/dts/Bindings/clock/qcom,gcc-msm8998.yaml b/dts/Bindings/clock/qcom,gcc-msm8998.yaml index 1d3cae9804..a0bb713929 100644 --- a/dts/Bindings/clock/qcom,gcc-msm8998.yaml +++ b/dts/Bindings/clock/qcom,gcc-msm8998.yaml @@ -66,6 +66,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> diff --git a/dts/Bindings/clock/qcom,gcc-qcs404.yaml b/dts/Bindings/clock/qcom,gcc-qcs404.yaml index 8cdece395e..ce06f3f8c3 100644 --- a/dts/Bindings/clock/qcom,gcc-qcs404.yaml +++ b/dts/Bindings/clock/qcom,gcc-qcs404.yaml @@ -40,6 +40,8 @@ required: - '#clock-cells' - '#reset-cells' +additionalProperties: false + examples: - | clock-controller@1800000 { diff --git a/dts/Bindings/clock/qcom,gcc-sc7180.yaml b/dts/Bindings/clock/qcom,gcc-sc7180.yaml index ee4f968e29..a345320e0e 100644 --- a/dts/Bindings/clock/qcom,gcc-sc7180.yaml +++ b/dts/Bindings/clock/qcom,gcc-sc7180.yaml @@ -58,6 +58,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/dts/Bindings/clock/qcom,gcc-sm8150.yaml b/dts/Bindings/clock/qcom,gcc-sm8150.yaml index 888e9a7083..36f3b3668c 100644 --- a/dts/Bindings/clock/qcom,gcc-sm8150.yaml +++ b/dts/Bindings/clock/qcom,gcc-sm8150.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/dts/Bindings/clock/qcom,gcc-sm8250.yaml b/dts/Bindings/clock/qcom,gcc-sm8250.yaml new file mode 100644 index 0000000000..2c40a8aa98 --- /dev/null +++ b/dts/Bindings/clock/qcom,gcc-sm8250.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SM8250 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SM8250. + + See also: + - dt-bindings/clock/qcom,gcc-sm8250.h + +properties: + compatible: + const: qcom,gcc-sm8250 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm8250"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,gcc.yaml b/dts/Bindings/clock/qcom,gcc.yaml index d18f8ab9ee..e533bb0cfd 100644 --- a/dts/Bindings/clock/qcom,gcc.yaml +++ b/dts/Bindings/clock/qcom,gcc.yaml @@ -74,6 +74,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: # Example for GCC for MSM8960: - | diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml index 85518494ce..f684fe67db 100644 --- a/dts/Bindings/clock/qcom,mmcc.yaml +++ b/dts/Bindings/clock/qcom,mmcc.yaml @@ -74,6 +74,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + if: properties: compatible: diff --git a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml index 7d853c1a85..d747bb58f0 100644 --- a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml +++ b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml @@ -50,6 +50,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-msm8998.h> diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt index 944719bd58..90a1349bc7 100644 --- a/dts/Bindings/clock/qcom,rpmcc.txt +++ b/dts/Bindings/clock/qcom,rpmcc.txt @@ -14,7 +14,9 @@ Required properties : "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" + "qcom,rpmcc-msm8976", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-ipq806x", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" "qcom,rpmcc-msm8998", "qcom,rpmcc" "qcom,rpmcc-qcs404", "qcom,rpmcc" diff --git a/dts/Bindings/clock/qcom,rpmhcc.yaml b/dts/Bindings/clock/qcom,rpmhcc.yaml index 2cd158f13b..a46a3a799a 100644 --- a/dts/Bindings/clock/qcom,rpmhcc.yaml +++ b/dts/Bindings/clock/qcom,rpmhcc.yaml @@ -20,6 +20,7 @@ properties: - qcom,sc7180-rpmh-clk - qcom,sdm845-rpmh-clk - qcom,sm8150-rpmh-clk + - qcom,sm8250-rpmh-clk clocks: maxItems: 1 @@ -35,6 +36,8 @@ required: - compatible - '#clock-cells' +additionalProperties: false + examples: # Example for GCC for SDM845: The below node should be defined inside # &apps_rsc node. diff --git a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml index 0429062f15..58cdfd5924 100644 --- a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml @@ -58,6 +58,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sc7180.h> diff --git a/dts/Bindings/clock/qcom,sc7180-gpucc.yaml b/dts/Bindings/clock/qcom,sc7180-gpucc.yaml index 5785192cc4..8635e35fd3 100644 --- a/dts/Bindings/clock/qcom,sc7180-gpucc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-gpucc.yaml @@ -52,6 +52,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sc7180.h> diff --git a/dts/Bindings/clock/qcom,sc7180-mss.yaml b/dts/Bindings/clock/qcom,sc7180-mss.yaml new file mode 100644 index 0000000000..0dd5d25ae7 --- /dev/null +++ b/dts/Bindings/clock/qcom,sc7180-mss.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Modem Clock Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm modem clock control module which supports the clocks on SC7180. + + See also: + - dt-bindings/clock/qcom,mss-sc7180.h + +properties: + compatible: + const: qcom,sc7180-mss + + clocks: + items: + - description: gcc_mss_mfab_axi clock from GCC + - description: gcc_mss_nav_axi clock from GCC + - description: gcc_mss_cfg_ahb clock from GCC + + clock-names: + items: + - const: gcc_mss_mfab_axis + - const: gcc_mss_nav_axi + - const: cfg_ahb + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + clock-controller@41a8000 { + compatible = "qcom,sc7180-mss"; + reg = <0 0x041a8000 0 0x8000>; + clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>; + clock-names = "gcc_mss_mfab_axis", + "gcc_mss_nav_axi", + "cfg_ahb"; + #clock-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,sc7180-videocc.yaml b/dts/Bindings/clock/qcom,sc7180-videocc.yaml index 31df901884..0071b97019 100644 --- a/dts/Bindings/clock/qcom,sc7180-videocc.yaml +++ b/dts/Bindings/clock/qcom,sc7180-videocc.yaml @@ -48,6 +48,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml index 89269ddfbd..ad47d747a3 100644 --- a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml @@ -67,6 +67,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/dts/Bindings/clock/qcom,sdm845-gpucc.yaml b/dts/Bindings/clock/qcom,sdm845-gpucc.yaml index bac04f1c5d..7a052ac5dc 100644 --- a/dts/Bindings/clock/qcom,sdm845-gpucc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-gpucc.yaml @@ -52,6 +52,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/dts/Bindings/clock/qcom,sdm845-videocc.yaml b/dts/Bindings/clock/qcom,sdm845-videocc.yaml index 9d216c0f11..2a6a81ab03 100644 --- a/dts/Bindings/clock/qcom,sdm845-videocc.yaml +++ b/dts/Bindings/clock/qcom,sdm845-videocc.yaml @@ -48,6 +48,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/dts/Bindings/clock/renesas,cpg-mssr.txt b/dts/Bindings/clock/renesas,cpg-mssr.txt deleted file mode 100644 index f4d153f24a..0000000000 --- a/dts/Bindings/clock/renesas,cpg-mssr.txt +++ /dev/null @@ -1,100 +0,0 @@ -* Renesas Clock Pulse Generator / Module Standby and Software Reset - -On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) -and MSSR (Module Standby and Software Reset) blocks are intimately connected, -and share the same register block. - -They provide the following functionalities: - - The CPG block generates various core clocks, - - The MSSR block provides two functions: - 1. Module Standby, providing a Clock Domain to control the clock supply - to individual SoC devices, - 2. Reset Control, to perform a software reset of individual SoC devices. - -Required Properties: - - compatible: Must be one of: - - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2) - - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) - - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N) - - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) - - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C) - - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M) - - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N) - - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E) - - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) - - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) - - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H) - - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N) - - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - - "renesas,r8a7796-cpg-mssr" for the r8a77960 SoC (R-Car M3-W) - - "renesas,r8a77961-cpg-mssr" for the r8a77961 SoC (R-Car M3-W+) - - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N) - - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H) - - "renesas,r8a77990-cpg-mssr" for the r8a77990 SoC (R-Car E3) - - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - - - reg: Base address and length of the memory resource used by the CPG/MSSR - block - - - clocks: References to external parent clocks, one entry for each entry in - clock-names - - clock-names: List of external parent clock names. Valid names are: - - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1, - r8a774b1, r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793, - r8a7794, r8a7795, r8a77960, r8a77961, r8a77965, r8a77970, - r8a77980, r8a77990, r8a77995) - - "extalr" (r8a774a1, r8a774b1, r8a7795, r8a77960, r8a77961, r8a77965, - r8a77970, r8a77980) - - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791, - r8a7793, r8a7794) - - - #clock-cells: Must be 2 - - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" - and a core clock reference, as defined in - <dt-bindings/clock/*-cpg-mssr.h>. - - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the datasheet. - - - #power-domain-cells: Must be 0 - - SoC devices that are part of the CPG/MSSR Clock Domain and can be - power-managed through Module Standby should refer to the CPG device - node in their "power-domains" property, as documented by the generic PM - Domain bindings in - Documentation/devicetree/bindings/power/power-domain.yaml. - - - #reset-cells: Must be 1 - - The single reset specifier cell must be the module number, as defined - in the datasheet. - - -Examples --------- - - - CPG device node: - - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7795-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&extalr_clk>; - clock-names = "extal", "extalr"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - - - CPG/MSSR Clock Domain member device node: - - scif2: serial@e6e88000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; - reg = <0 0xe6e88000 0 64>; - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "fck"; - dmas = <&dmac1 0x13>, <&dmac1 0x12>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - resets = <&cpg 310>; - }; diff --git a/dts/Bindings/clock/renesas,cpg-mssr.yaml b/dts/Bindings/clock/renesas,cpg-mssr.yaml new file mode 100644 index 0000000000..9cd102e5fe --- /dev/null +++ b/dts/Bindings/clock/renesas,cpg-mssr.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Clock Pulse Generator / Module Standby and Software Reset + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) + and MSSR (Module Standby and Software Reset) blocks are intimately connected, + and share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The MSSR block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + enum: + - renesas,r7s9210-cpg-mssr # RZ/A2 + - renesas,r8a7743-cpg-mssr # RZ/G1M + - renesas,r8a7744-cpg-mssr # RZ/G1N + - renesas,r8a7745-cpg-mssr # RZ/G1E + - renesas,r8a77470-cpg-mssr # RZ/G1C + - renesas,r8a774a1-cpg-mssr # RZ/G2M + - renesas,r8a774b1-cpg-mssr # RZ/G2N + - renesas,r8a774c0-cpg-mssr # RZ/G2E + - renesas,r8a7790-cpg-mssr # R-Car H2 + - renesas,r8a7791-cpg-mssr # R-Car M2-W + - renesas,r8a7792-cpg-mssr # R-Car V2H + - renesas,r8a7793-cpg-mssr # R-Car M2-N + - renesas,r8a7794-cpg-mssr # R-Car E2 + - renesas,r8a7795-cpg-mssr # R-Car H3 + - renesas,r8a7796-cpg-mssr # R-Car M3-W + - renesas,r8a77961-cpg-mssr # R-Car M3-W+ + - renesas,r8a77965-cpg-mssr # R-Car M3-N + - renesas,r8a77970-cpg-mssr # R-Car V3M + - renesas,r8a77980-cpg-mssr # R-Car V3H + - renesas,r8a77990-cpg-mssr # R-Car E3 + - renesas,r8a77995-cpg-mssr # R-Car D3 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - extal # All + - extalr # Most R-Car Gen3 and RZ/G2 + - usb_extal # Most R-Car Gen2 and RZ/G1 + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/*-cpg-mssr.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the datasheet. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/MSSR Clock Domain and can be + power-managed through Module Standby should refer to the CPG device node + in their "power-domains" property, as documented by the generic PM Domain + bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the datasheet. + const: 1 + +if: + not: + properties: + compatible: + items: + enum: + - renesas,r7s9210-cpg-mssr +then: + required: + - '#reset-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0xe6150000 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt b/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt index 83f6c6a7c4..4bf6f53bd9 100644 --- a/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt +++ b/dts/Bindings/clock/renesas,rcar-usb2-clock-sel.txt @@ -38,10 +38,17 @@ Required properties: - reg: offset and length of the USB 2.0 clock selector register block. - clocks: A list of phandles and specifier pairs. - clock-names: Name of the clocks. - - The functional clock must be "ehci_ohci" + - The functional clock of USB 2.0 host side must be "ehci_ohci" + - The functional clock of HS-USB side must be "hs-usb-if" - The USB_EXTAL clock pin must be "usb_extal" - The USB_XTAL clock pin must be "usb_xtal" - #clock-cells: Must be 0 +- power-domains: A phandle and symbolic PM domain specifier. + See power/renesas,rcar-sysc.yaml. +- resets: A list of phandles and specifier pairs. +- reset-names: Name of the resets. + - The reset of USB 2.0 host side must be "ehci_ohci" + - The reset of HS-USB side must be "hs-usb-if" Example (R-Car H3): @@ -49,7 +56,11 @@ Example (R-Car H3): compatible = "renesas,r8a7795-rcar-usb2-clock-sel", "renesas,rcar-gen3-usb2-clock-sel"; reg = <0 0xe6590630 0 0x02>; - clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>; - clock-names = "ehci_ohci", "usb_extal", "usb_xtal"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal>, <&usb_xtal>; + clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; #clock-cells = <0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; }; diff --git a/dts/Bindings/clock/socionext,uniphier-clock.yaml b/dts/Bindings/clock/socionext,uniphier-clock.yaml new file mode 100644 index 0000000000..c3930edc41 --- /dev/null +++ b/dts/Bindings/clock/socionext,uniphier-clock.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier clock controller + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + oneOf: + - description: System clock + enum: + - socionext,uniphier-ld4-clock + - socionext,uniphier-pro4-clock + - socionext,uniphier-sld8-clock + - socionext,uniphier-pro5-clock + - socionext,uniphier-pxs2-clock + - socionext,uniphier-ld6b-clock + - socionext,uniphier-ld11-clock + - socionext,uniphier-ld20-clock + - socionext,uniphier-pxs3-clock + - description: Media I/O (MIO) clock, SD clock + enum: + - socionext,uniphier-ld4-mio-clock + - socionext,uniphier-pro4-mio-clock + - socionext,uniphier-sld8-mio-clock + - socionext,uniphier-pro5-sd-clock + - socionext,uniphier-pxs2-sd-clock + - socionext,uniphier-ld11-mio-clock + - socionext,uniphier-ld20-sd-clock + - socionext,uniphier-pxs3-sd-clock + - description: Peripheral clock + enum: + - socionext,uniphier-ld4-peri-clock + - socionext,uniphier-pro4-peri-clock + - socionext,uniphier-sld8-peri-clock + - socionext,uniphier-pro5-peri-clock + - socionext,uniphier-pxs2-peri-clock + - socionext,uniphier-ld11-peri-clock + - socionext,uniphier-ld20-peri-clock + - socionext,uniphier-pxs3-peri-clock + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + +examples: + - | + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + clock { + compatible = "socionext,uniphier-ld11-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + clock { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + clock { + compatible = "socionext,uniphier-ld11-peri-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; diff --git a/dts/Bindings/clock/sprd.txt b/dts/Bindings/clock/sprd,sc9860-clk.txt index e9d179e882..aaaf02ca2a 100644 --- a/dts/Bindings/clock/sprd.txt +++ b/dts/Bindings/clock/sprd,sc9860-clk.txt @@ -1,4 +1,4 @@ -Spreadtrum Clock Binding +Spreadtrum SC9860 Clock Binding ------------------------ Required properties: diff --git a/dts/Bindings/clock/sprd,sc9863a-clk.yaml b/dts/Bindings/clock/sprd,sc9863a-clk.yaml new file mode 100644 index 0000000000..bb3a78d810 --- /dev/null +++ b/dts/Bindings/clock/sprd,sc9863a-clk.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Unisoc Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: SC9863A Clock Control Unit Device Tree Bindings + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + "#clock-cells": + const: 1 + + compatible : + enum: + - sprd,sc9863a-ap-clk + - sprd,sc9863a-aon-clk + - sprd,sc9863a-apahb-gate + - sprd,sc9863a-pmu-gate + - sprd,sc9863a-aonapb-gate + - sprd,sc9863a-pll + - sprd,sc9863a-mpll + - sprd,sc9863a-rpll + - sprd,sc9863a-dpll + - sprd,sc9863a-mm-gate + - sprd,sc9863a-apapb-gate + + clocks: + minItems: 1 + maxItems: 4 + description: | + The input parent clock(s) phandle for this clock, only list fixed + clocks which are declared in devicetree. + + clock-names: + minItems: 1 + maxItems: 4 + items: + - const: ext-26m + - const: ext-32k + - const: ext-4m + - const: rco-100m + + reg: + maxItems: 1 + +required: + - compatible + - '#clock-cells' + +if: + properties: + compatible: + enum: + - sprd,sc9863a-ap-clk + - sprd,sc9863a-aon-clk +then: + required: + - reg + +else: + description: | + Other SC9863a clock nodes should be the child of a syscon node in + which compatible string shoule be: + "sprd,sc9863a-glbregs", "syscon", "simple-mfd" + + The 'reg' property for the clock node is also required if there is a sub + range of registers for the clocks. + +examples: + - | + ap_clk: clock-controller@21500000 { + compatible = "sprd,sc9863a-ap-clk"; + reg = <0 0x21500000 0 0x1000>; + clocks = <&ext_26m>, <&ext_32k>; + clock-names = "ext-26m", "ext-32k"; + #clock-cells = <1>; + }; + + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + ap_ahb_regs: syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0 0x20e00000 0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20e00000 0x4000>; + + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; + }; + }; + }; + +... diff --git a/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml new file mode 100644 index 0000000000..869b18ac88 --- /dev/null +++ b/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI EHRPWM Time Base Clock + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +properties: + compatible: + items: + - const: ti,am654-ehrpwm-tbclk + - const: syscon + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +examples: + - | + ehrpwm_tbclk: syscon@4140 { + compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + reg = <0x4140 0x18>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/uniphier-clock.txt b/dts/Bindings/clock/uniphier-clock.txt deleted file mode 100644 index 7b5f602765..0000000000 --- a/dts/Bindings/clock/uniphier-clock.txt +++ /dev/null @@ -1,132 +0,0 @@ -UniPhier clock controller - - -System clock ------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-clock" - for LD4 SoC. - "socionext,uniphier-pro4-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-clock" - for LD11 SoC. - "socionext,uniphier-ld20-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - clock { - compatible = "socionext,uniphier-ld11-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 8: ST DMAC -12: GIO (Giga bit stream I/O) -14: USB3 ch0 host -15: USB3 ch1 host -16: USB3 ch0 PHY0 -17: USB3 ch0 PHY1 -20: USB3 ch1 PHY0 -21: USB3 ch1 PHY1 - - -Media I/O (MIO) clock, SD clock -------------------------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-mio-clock" - for LD4 SoC. - "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-mio-clock" - for LD11 SoC. - "socionext,uniphier-ld20-sd-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-sd-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - clock { - compatible = "socionext,uniphier-ld11-mio-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 0: SD ch0 host - 1: eMMC host - 2: SD ch1 host - 7: MIO DMAC - 8: USB2 ch0 host - 9: USB2 ch1 host -10: USB2 ch2 host -12: USB2 ch0 PHY -13: USB2 ch1 PHY -14: USB2 ch2 PHY - - -Peripheral clock ----------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-peri-clock" - for LD4 SoC. - "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-peri-clock" - for LD11 SoC. - "socionext,uniphier-ld20-peri-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", - "simple-mfd", "syscon"; - reg = <0x59820000 0x200>; - - clock { - compatible = "socionext,uniphier-ld11-peri-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 0: UART ch0 - 1: UART ch1 - 2: UART ch2 - 3: UART ch3 - 4: I2C ch0 - 5: I2C ch1 - 6: I2C ch2 - 7: I2C ch3 - 8: I2C ch4 - 9: I2C ch5 -10: I2C ch6 |