diff options
Diffstat (limited to 'dts/Bindings/display/msm')
| -rw-r--r-- | dts/Bindings/display/msm/dp-controller.yaml | 16 | ||||
| -rw-r--r-- | dts/Bindings/display/msm/dpu-sc7280.yaml | 232 | ||||
| -rw-r--r-- | dts/Bindings/display/msm/dsi-phy-14nm.yaml | 1 | ||||
| -rw-r--r-- | dts/Bindings/display/msm/gpu.txt | 157 | ||||
| -rw-r--r-- | dts/Bindings/display/msm/gpu.yaml | 288 |
5 files changed, 534 insertions, 160 deletions
diff --git a/dts/Bindings/display/msm/dp-controller.yaml b/dts/Bindings/display/msm/dp-controller.yaml index 64d8d9e5e4..63e585f487 100644 --- a/dts/Bindings/display/msm/dp-controller.yaml +++ b/dts/Bindings/display/msm/dp-controller.yaml @@ -17,9 +17,16 @@ properties: compatible: enum: - qcom,sc7180-dp + - qcom,sc8180x-dp + - qcom,sc8180x-edp reg: - maxItems: 1 + items: + - description: ahb register block + - description: aux register block + - description: link register block + - description: p0 register block + - description: p1 register block interrupts: maxItems: 1 @@ -95,12 +102,15 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,dispcc-sc7180.h> - #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> displayport-controller@ae90000 { compatible = "qcom,sc7180-dp"; - reg = <0xae90000 0x1400>; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, diff --git a/dts/Bindings/display/msm/dpu-sc7280.yaml b/dts/Bindings/display/msm/dpu-sc7280.yaml new file mode 100644 index 0000000000..fbeb931a02 --- /dev/null +++ b/dts/Bindings/display/msm/dpu-sc7280.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7280 + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SC7280. + +properties: + compatible: + const: qcom,sc7280-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF5 (EDP) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-14nm.yaml b/dts/Bindings/display/msm/dsi-phy-14nm.yaml index 064df50e21..81dbee4803 100644 --- a/dts/Bindings/display/msm/dsi-phy-14nm.yaml +++ b/dts/Bindings/display/msm/dsi-phy-14nm.yaml @@ -17,6 +17,7 @@ properties: enum: - qcom,dsi-phy-14nm - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 reg: items: diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt deleted file mode 100644 index 090dcb3fc3..0000000000 --- a/dts/Bindings/display/msm/gpu.txt +++ /dev/null @@ -1,157 +0,0 @@ -Qualcomm adreno/snapdragon GPU - -Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or - "amd,imageon-XYZ.W", "amd,imageon" - for example: "qcom,adreno-306.0", "qcom,adreno" - Note that you need to list the less specific "qcom,adreno" (since this - is what the device is matched on), in addition to the more specific - with the chip-id. - If "amd,imageon" is used, there should be no top level msm device. -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the gpu. -- clocks: device clocks (if applicable) - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required by a3xx, a4xx and a5xx - cores: - * "core" - * "iface" - * "mem_iface" - For GMU attached devices the GPU clocks are not used and are not required. The - following devices should not list clocks: - - qcom,adreno-630.2 -- iommus: optional phandle to an adreno iommu instance -- operating-points-v2: optional phandle to the OPP operating points -- interconnects: optional phandle to an interconnect provider. See - ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms - will have two paths; all others will have one path. -- interconnect-names: The names of the interconnect paths that correspond to the - interconnects property. Values must be gfx-mem and ocmem. -- qcom,gmu: For GMU attached devices a phandle to the GMU device that will - control the power for the GPU. Applicable targets: - - qcom,adreno-630.2 -- zap-shader: For a5xx and a6xx devices this node contains a memory-region that - points to reserved memory to store the zap shader that can be used to help - bring the GPU out of secure mode. -- firmware-name: optional property of the 'zap-shader' node, listing the - relative path of the device specific zap firmware. -- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and - a4xx Snapdragon SoCs. See - Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Optional properties: -- #cooling-cells: The value must be 2. For details, please refer - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml. - -Example 3xx/4xx: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gpu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - #cooling-cells = <2>; - }; - - gpu_sram: ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gpu_sram: gpu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; - -Example a6xx (with GMU): - -/ { - ... - - gpu@5000000 { - compatible = "qcom,adreno-630.2", "qcom,adreno"; - #stream-id-cells = <16>; - - reg = <0x5000000 0x40000>, <0x509e000 0x10>; - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; - - #cooling-cells = <2>; - - /* - * Look ma, no clocks! The GPU clocks and power are - * controlled entirely by the GMU - */ - - interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - - iommus = <&adreno_smmu 0>; - - operating-points-v2 = <&gpu_opp_table>; - - interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; - interconnect-names = "gfx-mem"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-430000000 { - opp-hz = /bits/ 64 <430000000>; - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; - opp-peak-kBps = <5412000>; - }; - - opp-355000000 { - opp-hz = /bits/ 64 <355000000>; - opp-level = <RPMH_REGULATOR_LEVEL_SVS>; - opp-peak-kBps = <3072000>; - }; - - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; - opp-peak-kBps = <3072000>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; - opp-peak-kBps = <1804000>; - }; - }; - - qcom,gmu = <&gmu>; - - zap-shader { - memory-region = <&zap_shader_region>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" - }; - }; -}; diff --git a/dts/Bindings/display/msm/gpu.yaml b/dts/Bindings/display/msm/gpu.yaml new file mode 100644 index 0000000000..99a1ba3ada --- /dev/null +++ b/dts/Bindings/display/msm/gpu.yaml @@ -0,0 +1,288 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the Adreno or Snapdragon GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + oneOf: + - description: | + The driver is parsing the compat string for Adreno to + figure out the gpu-id and patch level. + items: + - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Imageon to + figure out the gpu-id and patch level. + items: + - pattern: '^amd,imageon-200\.[0-1]$' + - const: amd,imageon + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 2 + + interconnect-names: + minItems: 1 + items: + - const: gfx-mem + - const: ocmem + + iommus: + maxItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: | + phandles to one or more reserved on-chip SRAM regions. + phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml + + operating-points-v2: true + opp-table: + type: object + + power-domains: + maxItems: 1 + + zap-shader: + type: object + description: | + For a5xx and a6xx devices this node contains a memory-region that + points to reserved memory to store the zap shader that can be used to + help bring the GPU out of secure mode. + properties: + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + + "#cooling-cells": + const: 2 + + nvmem-cell-names: + maxItems: 1 + + nvmem-cells: + description: efuse registers + maxItems: 1 + + qcom,gmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. + + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + + then: + properties: + clocks: + minItems: 2 + maxItems: 7 + + clock-names: + items: + anyOf: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem + description: GPU Memory clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gfx3d + description: GPU 3D engine clock + - const: rbbmtimer + description: GPU RBBM Timer for Adreno 5xx series + minItems: 2 + maxItems: 7 + + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' + + then: # Since Adreno 6xx series clocks should be defined in GMU + properties: + clocks: false + clock-names: false + +examples: + - | + + // Example a3xx/4xx: + + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu: gpu@fdb00000 { + compatible = "qcom,adreno-330.2", "qcom,adreno"; + + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + clock-names = "core", "iface", "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + #cooling-cells = <2>; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + - | + + // Example a6xx (with GMU): + + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + #cooling-cells = <2>; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; + }; |