diff options
Diffstat (limited to 'dts/Bindings/display/panel')
-rw-r--r-- | dts/Bindings/display/panel/boe,tv101wum-nl6.yaml | 7 | ||||
-rw-r--r-- | dts/Bindings/display/panel/orisetech,otm8009a.yaml | 2 | ||||
-rw-r--r-- | dts/Bindings/display/panel/panel-edp.yaml | 188 | ||||
-rw-r--r-- | dts/Bindings/display/panel/panel-simple.yaml | 5 | ||||
-rw-r--r-- | dts/Bindings/display/panel/raydium,rm68200.yaml | 2 | ||||
-rw-r--r-- | dts/Bindings/display/panel/samsung,s6d27a1.yaml | 98 | ||||
-rw-r--r-- | dts/Bindings/display/panel/sharp,ls060t1sx01.yaml | 56 |
7 files changed, 356 insertions, 2 deletions
diff --git a/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml b/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml index b87a2e28c8..a2384bd74c 100644 --- a/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml @@ -26,6 +26,10 @@ properties: - auo,b101uan08.3 # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel - boe,tv105wum-nw0 + # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel + - boe,tv110c9m-ll3 + # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel + - innolux,hj110iz-01a reg: description: the virtual channel number of a DSI peripheral @@ -36,6 +40,9 @@ properties: pp1800-supply: description: core voltage supply + pp3300-supply: + description: core voltage supply + avdd-supply: description: phandle of the regulator that provides positive voltage diff --git a/dts/Bindings/display/panel/orisetech,otm8009a.yaml b/dts/Bindings/display/panel/orisetech,otm8009a.yaml index 4b6dda6dbc..17cbd0ad32 100644 --- a/dts/Bindings/display/panel/orisetech,otm8009a.yaml +++ b/dts/Bindings/display/panel/orisetech,otm8009a.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using diff --git a/dts/Bindings/display/panel/panel-edp.yaml b/dts/Bindings/display/panel/panel-edp.yaml new file mode 100644 index 0000000000..bb0cf6827e --- /dev/null +++ b/dts/Bindings/display/panel/panel-edp.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: | + This binding file can be used to indicate that an eDP panel is connected + to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without + actually specifying exactly what panel is connected. This is useful for + the case that more than one different panel could be connected to the + board, either for second-sourcing purposes or to support multiple SKUs + with different LCDs that hook up to a common board. + + As per above, a requirement for using this binding is that the panel is + represented under the DP AUX bus. This means that we can use any + information provided by the DP AUX bus (including the EDID) to identify + the panel. We can use this to identify display size, resolution, and + timings among other things. + + One piece of information about eDP panels that is typically _not_ + provided anywhere on the DP AUX bus is the power sequencing timings. + This is the reason why, historically, we've always had to explicitly + list eDP panels. We solve that here with two tricks. The "worst case" + power on timings for any panels expected to be connected to a board are + specified in these bindings. Once we've powered on, it's expected that + the operating system will lookup the panel in a table (based on EDID + information) to figure out other power sequencing timings. + + eDP panels in general can have somewhat arbitrary power sequencing + requirements. However, even though it's arbitrary in general, the + vast majority of panel datasheets have a power sequence diagram that + looks the exactly the same as every other panel. Each panel datasheet + cares about different timings in this diagram but the fact that the + diagram is so similar means we can come up with a single driver to + handle it. + + These diagrams all look roughly like this, sometimes labeled with + slightly different numbers / lines but all pretty much the same + sequence. This is because much of this diagram comes straight from + the eDP Standard. + + __________________________________________________ + Vdd ___/: :\____ / + _/ : : \_____/ + :<T1>:<T2>: :<--T10-->:<T11>:<T12>: + : +-----------------------+---------+---------+ + eDP -----------+ Black video | Src vid | Blk vid + + Display : +-----------------------+---------+---------+ + : _______________________:_________:_________: + HPD :<T3>| : : | + ___________| : : |_____________ + : : : : + Sink +-----------------------:---------:---------+ + AUX CH -----------+ AUX Ch operational : : +------------- + +-----------------------:---------:---------+ + : : : : + :<T4>: :<T7>: : : + Src main +------+------+--------------+---------+ + lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+------------- + +------+------+--------------+---------+ + : <T5> :<-T6->:<-T8->: : + :__:<T9>: + LED_EN | | + _____________________________________| |____________________________ + : : + __________:__:_ + PWM | : : | + __________________________| : : |__________________________ + : : : : + _____________:__________:__:_:______ + Bklight ____/: : : : : :\____ + power _______/ :<---T13---->: : : :<T16>: \______________ + (Vbl) :<T17>:<---------T14--------->: :<-T15->:<T18>: + + The above looks fairly complex but, as per above, each panel only cares + about a subset of those timings. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: edp-panel + + hpd-reliable-delay-ms: + description: + A fixed amount of time that must be waited after powering on the + panel's power-supply before the HPD signal is a reliable way to know + when the AUX channel is ready. This is useful for panels that glitch + the HPD at the start of power-on. This value is not needed if HPD is + always reliable for all panels that might be connected. + + hpd-absent-delay-ms: + description: + The panel specifies that HPD will be asserted this many milliseconds + from power on (timing T3 in the diagram above). If we have no way to + measure HPD then a fixed delay of this many milliseconds can be used. + This can also be used as a timeout when waiting for HPD. Does not + include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms + and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and + then we know HPD would assert in the next 120 ms. This value is not + needed if HPD hooked up, either through a GPIO in the panel node or + hooked up directly to the eDP controller. + + backlight: true + enable-gpios: true + port: true + power-supply: true + no-hpd: true + hpd-gpios: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + hpd-reliable-delay-ms = <15>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml index 335776c454..f3c9395d23 100644 --- a/dts/Bindings/display/panel/panel-simple.yaml +++ b/dts/Bindings/display/panel/panel-simple.yaml @@ -166,6 +166,8 @@ properties: - innolux,at070tn92 # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - innolux,g070y2-l01 + # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel + - innolux,g070y2-t02 # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel - innolux,g101ice-l01 # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel @@ -309,6 +311,8 @@ properties: - urt,umsh-8596md-11t - urt,umsh-8596md-19t - urt,umsh-8596md-20t + # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel + - vivax,tpc9150-panel # VXT 800x480 color TFT LCD panel - vxt,vl050-8048nt-c01 # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel @@ -317,6 +321,7 @@ properties: - yes-optoelectronics,ytc700tlag-05-201c backlight: true + ddc-i2c-bus: true enable-gpios: true port: true power-supply: true diff --git a/dts/Bindings/display/panel/raydium,rm68200.yaml b/dts/Bindings/display/panel/raydium,rm68200.yaml index 39477793d2..e8ce231563 100644 --- a/dts/Bindings/display/panel/raydium,rm68200.yaml +++ b/dts/Bindings/display/panel/raydium,rm68200.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD diff --git a/dts/Bindings/display/panel/samsung,s6d27a1.yaml b/dts/Bindings/display/panel/samsung,s6d27a1.yaml new file mode 100644 index 0000000000..26e3c820a2 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6d27a1.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D27A1 display panel + +description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile + Displays (SMD). The panel must obey the rules for a SPI slave device + as specified in spi/spi-controller.yaml + +maintainers: + - Markuss Broks <markuss.broks@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6d27a1 + + reg: true + + interrupts: + description: provides an optional ESD (electrostatic discharge) + interrupt that signals abnormalities in the display hardware. + This can also be raised for other reasons like erroneous + configuration. + maxItems: 1 + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 1200000 + + port: true + +required: + - compatible + - reg + - vci-supply + - vccio-supply + - spi-cpha + - spi-cpol + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + compatible = "spi-gpio"; + sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + spi-cpha; + spi-cpol; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml b/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml new file mode 100644 index 0000000000..271c097cc9 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 6.0" FullHD TFT LCD panel + +maintainers: + - Dmitry Baryskov <dmitry.baryshkov@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls060t1sx01 + + reg: true + backlight: true + reset-gpios: true + port: true + + avdd-supply: + description: handle of the regulator that provides the positive supply voltage + avee-supply: + description: handle of the regulator that provides the negative supply voltage + vddi-supply: + description: handle of the regulator that provides the I/O supply voltage + vddh-supply: + description: handle of the regulator that provides the analog supply voltage + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls060t1sx01"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&backlight>; + reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>; + }; + }; + +... |