diff options
Diffstat (limited to 'dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml')
-rw-r--r-- | dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml new file mode 100644 index 0000000000..9ab123cd23 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra DisplayPort AUX Interface + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra Display Port Auxiliary (DPAUX) pad controller manages two + pins which can be assigned to either the DPAUX channel or to an I2C + controller. + + When configured for DisplayPort AUX operation, the DPAUX controller + can also be used to communicate with a DisplayPort device using the + AUX channel. + +properties: + $nodename: + pattern: "^dpaux@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - nvidia,tegra124-dpaux + - nvidia,tegra210-dpaux + - nvidia,tegra186-dpaux + - nvidia,tegra194-dpaux + + - items: + - const: nvidia,tegra132-dpaux + - const: nvidia,tegra124-dpaux + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock input for the DPAUX hardware + - description: reference clock + + clock-names: + items: + - const: dpaux + - const: parent + + resets: + items: + - description: module reset + + reset-names: + items: + - const: dpaux + + power-domains: + maxItems: 1 + + i2c-bus: + description: Subnode where I2C slave devices are listed. This + subnode must be always present. If there are no I2C slave + devices, an empty node should be added. See ../../i2c/i2c.yaml + for more information. + type: object + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + vdd-supply: + description: phandle of a supply that powers the DisplayPort + link + +patternProperties: + "^pinmux-[a-z0-9]+$": + description: + Since only three configurations are possible, only three child + nodes are needed to describe the pin mux'ing options for the + DPAUX pads. Furthermore, given that the pad functions are only + applicable to a single set of pads, the child nodes only need + to describe the pad group the functions are being applied to + rather than the individual pads. + type: object + properties: + groups: + const: dpaux-io + + function: + enum: + - aux + - i2c + - off + + additionalProperties: false + + required: + - groups + - function + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dpaux: dpaux@545c0000 { + compatible = "nvidia,tegra210-dpaux"; + reg = <0x545c0000 0x00040000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DPAUX>, + <&tegra_car TEGRA210_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 181>; + reset-names = "dpaux"; + power-domains = <&pd_sor>; + status = "disabled"; + + state_dpaux_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; |