diff options
Diffstat (limited to 'dts/Bindings/firmware/arm,scpi.yaml')
| -rw-r--r-- | dts/Bindings/firmware/arm,scpi.yaml | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/dts/Bindings/firmware/arm,scpi.yaml b/dts/Bindings/firmware/arm,scpi.yaml new file mode 100644 index 0000000000..d7113b0645 --- /dev/null +++ b/dts/Bindings/firmware/arm,scpi.yaml @@ -0,0 +1,247 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2021 ARM Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/arm,scpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Control and Power Interface (SCPI) Message Protocol bindings + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + +description: | + Firmware implementing the SCPI described in ARM document number ARM DUI + 0922B ("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be + used by Linux to initiate various system control and power operations. + + This binding is intended to define the interface the firmware implementing + the SCPI provide for OSPM in the device tree. + + [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html + +properties: + $nodename: + const: scpi + + compatible: + description: + SCPI compliant firmware complying to SCPI v1.0 and above OR + SCPI compliant firmware complying to all unversioned releases + prior to SCPI v1.0 + oneOf: + - const: arm,scpi # SCPI v1.0 and above + - const: arm,scpi-pre-1.0 # Unversioned SCPI before v1.0 + - items: + - enum: + - amlogic,meson-gxbb-scpi + - const: arm,scpi-pre-1.0 + + mboxes: + description: + List of phandle and mailbox channel specifiers. All the channels reserved + by remote SCP firmware for use by SCPI message protocol should be + specified in any order. + minItems: 1 + + shmem: + description: + List of phandle pointing to the shared memory(SHM) area between the + processors using these mailboxes for IPC, one for each mailbox SHM can + be any memory reserved for the purpose of this communication between the + processors. + minItems: 1 + + power-controller: + type: object + description: + This sub-node represents SCPI power domain controller. + + properties: + compatible: + const: arm,scpi-power-domains + + '#power-domain-cells': + const: 1 + + num-domains: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Total number of power domains provided by SCPI. This is needed as + the SCPI message protocol lacks a mechanism to query this + information at runtime. + + required: + - compatible + - '#power-domain-cells' + - num-domains + + additionalProperties: false + + sensors: + type: object + description: | + This sub-node represents SCPI sensors controller. + + properties: + compatible: + oneOf: + - const: arm,scpi-sensors + - items: + - enum: + - amlogic,meson-gxbb-scpi-sensors + - const: arm,scpi-sensors + + '#thermal-sensor-cells': + const: 1 + + required: + - compatible + - '#thermal-sensor-cells' + + additionalProperties: false + + clocks: + type: object + description: + This is the container node. Each sub-node represents one of the types + of clock controller - indexed or full range. + + properties: + compatible: + const: arm,scpi-clocks + + patternProperties: + "^clocks-[0-9a-f]+$": + type: object + description: | + This sub-node represents one of the types of clock controller + - indexed or full range. + + "arm,scpi-dvfs-clocks" - all the clocks that are variable and index + based. These clocks don't provide an entire range of values between + the limits but only discrete points within the range. The firmware + provides the mapping for each such operating frequency and the index + associated with it. The firmware also manages the voltage scaling + appropriately with the clock scaling. + + "arm,scpi-variable-clocks" - all the clocks that are variable and + provide full range within the specified range. The firmware provides + the range of values within a specified range. + + properties: + compatible: + oneOf: + - const: arm,scpi-dvfs-clocks + - const: arm,scpi-variable-clocks + + '#clock-cells': + const: 1 + + clock-output-names: true + + clock-indices: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + The identifying number for the clocks(i.e.clock_id) in the node. + It can be non linear and hence provide the mapping of identifiers + into the clock-output-names array. + + required: + - compatible + - '#clock-cells' + - clock-output-names + - clock-indices + + additionalProperties: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - mboxes + - shmem + +examples: + - | + firmware { + scpi { + compatible = "arm,scpi"; + mboxes = <&mhuA 1>; + shmem = <&cpu_scp_hpri>; /* HP-NonSecure */ + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: clocks-0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + + scpi_clk: clocks-1 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; + + scpi_sensors: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + sram@50000000 { + compatible = "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri: scp-sram-section@0 { + compatible = "arm,scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-sram-section@200 { + compatible = "arm,scp-shmem"; + reg = <0x200 0x200>; + }; + }; + }; + + - | + firmware { + scpi { + compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + scpi_sensors1: sensors { + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + }; +... |