diff options
Diffstat (limited to 'dts/Bindings/iio/magnetometer')
-rw-r--r-- | dts/Bindings/iio/magnetometer/ti,tmag5273.yaml | 75 | ||||
-rw-r--r-- | dts/Bindings/iio/magnetometer/yamaha,yas530.yaml | 18 |
2 files changed, 84 insertions, 9 deletions
diff --git a/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml b/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml new file mode 100644 index 0000000000..121d540b7b --- /dev/null +++ b/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor + +maintainers: + - Gerald Loacker <gerald.loacker@wolfvision.net> + +description: + The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device + integrates three independent Hall-effect sensors in the X, Y, and Z axes. + The device has an integrated temperature sensor available. The TMAG5273 + can be configured through the I2C interface to enable any combination of + magnetic axes and temperature measurements. An integrated angle calculation + engine (CORDIC) provides full 360° angular position information for both + on-axis and off-axis angle measurement topologies. The angle calculation is + performed using two user-selected magnetic axes. + +properties: + compatible: + const: ti,tmag5273 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + ti,angle-measurement: + $ref: /schemas/types.yaml#/definitions/string + description: + Enables angle measurement in the selected plane. + If not specified, "x-y" will be anables as default. + enum: + - off + - x-y + - y-z + - x-z + + vcc-supply: + description: + A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin, + typically 3.3 V. + + interrupts: + description: + The low active interrupt can be configured to be fixed width or latched. + Interrupt events can be configured to be generated from magnetic + thresholds or when a conversion is completed. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@35 { + compatible = "ti,tmag5273"; + reg = <0x35>; + #io-channel-cells = <1>; + ti,angle-measurement = "x-z"; + vcc-supply = <&vcc3v3>; + }; + }; +... diff --git a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml index 9438fffaf0..877226e921 100644 --- a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml +++ b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml @@ -91,12 +91,12 @@ examples: #size-cells = <0>; magnetometer@2e { - compatible = "yamaha,yas530"; - reg = <0x2e>; - vdd-supply = <&ldo1_reg>; - iovdd-supply = <&ldo2_reg>; - reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; }; }; @@ -105,8 +105,8 @@ examples: #size-cells = <0>; magnetometer@2e { - compatible = "yamaha,yas539"; - reg = <0x2e>; - vdd-supply = <&ldo1_reg>; + compatible = "yamaha,yas539"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; }; }; |