1 files changed, 158 insertions, 0 deletions
diff --git a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
new file mode 100644
index 0000000000..6994b30015
--- /dev/null
+++ b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell mprls0025pa pressure sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+description: |
+  Honeywell pressure sensor of model mprls0025pa.
+
+  This sensor has an I2C and SPI interface.
+
+  There are many models with different pressure ranges available. The vendor
+  calls them "mpr series". All of them have the identical programming model and
+  differ in the pressure range, unit and transfer function.
+
+  To support different models one need to specify its pressure triplet as well
+  as the transfer function.
+
+  For custom silicon chips not covered by the Honeywell MPR series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+  The minimal range value stands for the minimum pressure and the maximum value
+  also for the maximum pressure with linear relation inside the range.
+
+  The transfer function defines the ranges of numerical values delivered by the
+  sensor.
+
+  Specifications about the devices can be found at:
+    https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+      products/sensors/pressure-sensors/board-mount-pressure-sensors/
+      micropressure-mpr-series/documents/
+      sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+
+properties:
+  compatible:
+    const: honeywell,mprls0025pa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Optional interrupt for indicating End-of-conversion.
+      If not present, the driver loops for a while until the received status
+      byte indicates correct measurement.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Optional GPIO for resetting the device.
+      If not present the device is not reset during the probe.
+    maxItems: 1
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by the
+      sensor.
+      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    enum: [1, 2, 3]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+
+  spi-max-frequency:
+    maximum: 800000
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+  - honeywell,transfer-function
+  - vdd-supply
+
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@18 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0x18>;
+            reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0025PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+...