diff options
Diffstat (limited to 'dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml')
-rw-r--r-- | dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml new file mode 100644 index 0000000000..6994b30015 --- /dev/null +++ b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell mprls0025pa pressure sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + - Petre Rodan <petre.rodan@subdimension.ro> + +description: | + Honeywell pressure sensor of model mprls0025pa. + + This sensor has an I2C and SPI interface. + + There are many models with different pressure ranges available. The vendor + calls them "mpr series". All of them have the identical programming model and + differ in the pressure range, unit and transfer function. + + To support different models one need to specify its pressure triplet as well + as the transfer function. + + For custom silicon chips not covered by the Honeywell MPR series datasheet, + the pressure values can be specified manually via honeywell,pmin-pascal and + honeywell,pmax-pascal. + The minimal range value stands for the minimum pressure and the maximum value + also for the maximum pressure with linear relation inside the range. + + The transfer function defines the ranges of numerical values delivered by the + sensor. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ + products/sensors/pressure-sensors/board-mount-pressure-sensors/ + micropressure-mpr-series/documents/ + sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + +properties: + compatible: + const: honeywell,mprls0025pa + + reg: + maxItems: 1 + + interrupts: + description: + Optional interrupt for indicating End-of-conversion. + If not present, the driver loops for a while until the received status + byte indicates correct measurement. + maxItems: 1 + + reset-gpios: + description: + Optional GPIO for resetting the device. + If not present the device is not reset during the probe. + maxItems: 1 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by the + sensor. + 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) + 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) + 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + enum: [1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, unset and provide pmin-pascal and pmax-pascal instead. + enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG, + 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG, + 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG, + 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + spi-max-frequency: + maximum: 800000 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + - honeywell,transfer-function + - vdd-supply + +oneOf: + - required: + - honeywell,pressure-triplet + - required: + - honeywell,pmin-pascal + - honeywell,pmax-pascal + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + required: + - honeywell,pressure-triplet + then: + properties: + honeywell,pmin-pascal: false + honeywell,pmax-pascal: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@18 { + compatible = "honeywell,mprls0025pa"; + reg = <0x18>; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0025PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,mprls0025pa"; + reg = <0>; + spi-max-frequency = <800000>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0015PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; +... |