diff options
Diffstat (limited to 'dts/Bindings/iio/st,st-sensors.yaml')
| -rw-r--r-- | dts/Bindings/iio/st,st-sensors.yaml | 262 |
1 files changed, 185 insertions, 77 deletions
diff --git a/dts/Bindings/iio/st,st-sensors.yaml b/dts/Bindings/iio/st,st-sensors.yaml index 7e98f47987..b2a1e42c56 100644 --- a/dts/Bindings/iio/st,st-sensors.yaml +++ b/dts/Bindings/iio/st,st-sensors.yaml @@ -6,7 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics MEMS sensors -description: | +description: The STMicroelectronics sensor devices are pretty straight-forward + I2C or SPI devices, all sharing the same device tree descriptions no matter + what type of sensor it is. Note that whilst this covers many STMicro MEMs sensors, some more complex IMUs need their own bindings. The STMicroelectronics sensor devices are pretty straight-forward I2C or @@ -15,90 +17,181 @@ description: | maintainers: - Denis Ciocca <denis.ciocca@st.com> + - Linus Walleij <linus.walleij@linaro.org> properties: compatible: - description: | - Some values are deprecated. - st,lis3lv02d (deprecated, use st,lis3lv02dl-accel) - st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel) - enum: - # Accelerometers - - st,lis3lv02d - - st,lis302dl-spi - - st,lis3lv02dl-accel - - st,lsm303dlh-accel - - st,lsm303dlhc-accel - - st,lis3dh-accel - - st,lsm330d-accel - - st,lsm330dl-accel - - st,lsm330dlc-accel - - st,lis331dl-accel - - st,lis331dlh-accel - - st,lsm303dl-accel - - st,lsm303dlm-accel - - st,lsm330-accel - - st,lsm303agr-accel - - st,lis2dh12-accel - - st,h3lis331dl-accel - - st,lng2dm-accel - - st,lis3l02dq - - st,lis2dw12 - - st,lis3dhh - - st,lis3de - - st,lis2de12 - - st,lis2hh12 - # Gyroscopes - - st,l3g4200d-gyro - - st,lsm330d-gyro - - st,lsm330dl-gyro - - st,lsm330dlc-gyro - - st,l3gd20-gyro - - st,l3gd20h-gyro - - st,l3g4is-gyro - - st,lsm330-gyro - - st,lsm9ds0-gyro - # Magnetometers - - st,lsm303agr-magn - - st,lsm303dlh-magn - - st,lsm303dlhc-magn - - st,lsm303dlm-magn - - st,lis3mdl-magn - - st,lis2mdl - - st,lsm9ds1-magn - - st,iis2mdc - # Pressure sensors - - st,lps001wp-press - - st,lps25h-press - - st,lps331ap-press - - st,lps22hb-press - - st,lps33hw - - st,lps35hw - - st,lps22hh + oneOf: + - description: STMicroelectronics Accelerometers + enum: + - st,h3lis331dl-accel + - st,lis2de12 + - st,lis2dw12 + - st,lis2hh12 + - st,lis2dh12-accel + - st,lis331dl-accel + - st,lis331dlh-accel + - st,lis3de + - st,lis3dh-accel + - st,lis3dhh + - st,lis3l02dq + - st,lis3lv02dl-accel + - st,lng2dm-accel + - st,lsm303agr-accel + - st,lsm303dl-accel + - st,lsm303dlh-accel + - st,lsm303dlhc-accel + - st,lsm303dlm-accel + - st,lsm330-accel + - st,lsm330d-accel + - st,lsm330dl-accel + - st,lsm330dlc-accel + - description: STMicroelectronics Gyroscopes + enum: + - st,l3g4200d-gyro + - st,l3g4is-gyro + - st,l3gd20-gyro + - st,l3gd20h-gyro + - st,lsm330-gyro + - st,lsm330d-gyro + - st,lsm330dl-gyro + - st,lsm330dlc-gyro + - st,lsm9ds0-gyro + - description: STMicroelectronics Magnetometers + enum: + - st,lis2mdl + - st,lis3mdl-magn + - st,lsm303agr-magn + - st,lsm303dlh-magn + - st,lsm303dlhc-magn + - st,lsm303dlm-magn + - st,lsm9ds1-magn + - description: STMicroelectronics Pressure Sensors + enum: + - st,lps001wp-press + - st,lps22hb-press + - st,lps22hh + - st,lps25h-press + - st,lps331ap-press + - st,lps33hw + - st,lps35hw + - description: IMUs + enum: + - st,lsm9ds0-imu + - description: Deprecated bindings + enum: + - st,lis302dl-spi + - st,lis3lv02d + deprecated: true reg: maxItems: 1 interrupts: + description: interrupt line(s) connected to the DRDY line(s) and/or the + Intertial interrupt lines INT1 and INT2 if these exist. This means up to + three interrupts, and the DRDY must be the first one if it exists on + the package. The trigger edge of the interrupts is sometimes software + configurable in the hardware so the operating system should parse this + flag and set up the trigger edge as indicated in the device tree. minItems: 1 + maxItems: 2 vdd-supply: true vddio-supply: true st,drdy-int-pin: + description: the pin on the package that will be used to signal + "data ready" (valid values 1 or 2). This property is not configurable + on all sensors. $ref: /schemas/types.yaml#/definitions/uint32 - description: - Some sensors have multiple possible pins via which they can provide - a data ready interrupt. This selects which one. - enum: - - 1 - - 2 + enum: [1, 2] drive-open-drain: $ref: /schemas/types.yaml#/definitions/flag - description: | - The interrupt/data ready line will be configured as open drain, which - is useful if several sensors share the same interrupt line. + description: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. (This binding is taken from pinctrl.) + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + +allOf: + - if: + properties: + compatible: + enum: + # These have no interrupts + - st,lps001wp + then: + properties: + interrupts: false + st,drdy-int-pin: false + drive-open-drain: false + + - if: + properties: + compatible: + enum: + # These have only DRDY + - st,lis2mdl + - st,lis3l02dq + - st,lis3lv02dl-accel + - st,lps22hb-press + - st,lps22hh + - st,lps25h-press + - st,lps33hw + - st,lps35hw + - st,lsm303agr-magn + - st,lsm303dlh-magn + - st,lsm303dlhc-magn + - st,lsm303dlm-magn + then: + properties: + interrupts: + maxItems: 1 + st,drdy-int-pin: false + + - if: + properties: + compatible: + enum: + # Two intertial interrupts i.e. accelerometer/gyro interrupts + - st,h3lis331dl-accel + - st,l3g4200d-gyro + - st,l3g4is-gyro + - st,l3gd20-gyro + - st,l3gd20h-gyro + - st,lis2de12 + - st,lis2dw12 + - st,lis2hh12 + - st,lis2dh12-accel + - st,lis331dl-accel + - st,lis331dlh-accel + - st,lis3de + - st,lis3dh-accel + - st,lis3dhh + - st,lis3mdl-magn + - st,lng2dm-accel + - st,lps331ap-press + - st,lsm303agr-accel + - st,lsm303dlh-accel + - st,lsm303dlhc-accel + - st,lsm303dlm-accel + - st,lsm330-accel + - st,lsm330-gyro + - st,lsm330d-accel + - st,lsm330d-gyro + - st,lsm330dl-accel + - st,lsm330dl-gyro + - st,lsm330dlc-accel + - st,lsm330dlc-gyro + - st,lsm9ds0-gyro + - st,lsm9ds1-magn + then: + properties: + interrupts: + maxItems: 2 required: - compatible @@ -110,15 +203,30 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - accelerometer@1d { - compatible = "st,lis3lv02dl-accel"; - reg = <0x1d>; - interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>; - pinctrl-0 = <&lis3lv02dl_nhk_mode>; - pinctrl-names = "default"; - }; + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@1c { + compatible = "st,lis331dl-accel"; + reg = <0x1c>; + st,drdy-int-pin = <1>; + vdd-supply = <&ldo1>; + vddio-supply = <&ldo2>; + interrupt-parent = <&gpio>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; + }; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + + l3g4200d: gyroscope@0 { + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0>; + vdd-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + }; }; ... |