summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/iio
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/iio')
-rw-r--r--dts/Bindings/iio/adc/at91_adc.txt12
-rw-r--r--dts/Bindings/iio/adc/brcm,iproc-static-adc.txt41
-rw-r--r--dts/Bindings/iio/adc/max1363.txt63
-rw-r--r--dts/Bindings/iio/chemical/atlas,ec-sm.txt22
-rw-r--r--dts/Bindings/iio/dac/ad5755.txt124
-rw-r--r--dts/Bindings/iio/pressure/bmp085.txt15
-rw-r--r--dts/Bindings/iio/st-sensors.txt1
7 files changed, 268 insertions, 10 deletions
diff --git a/dts/Bindings/iio/adc/at91_adc.txt b/dts/Bindings/iio/adc/at91_adc.txt
index 0f813dec5e..f65b04fb79 100644
--- a/dts/Bindings/iio/adc/at91_adc.txt
+++ b/dts/Bindings/iio/adc/at91_adc.txt
@@ -59,28 +59,24 @@ adc0: adc@fffb0000 {
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "lowres";
- trigger@0 {
- reg = <0>;
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
- reg = <1>;
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
- reg = <2>;
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
- reg = <3>;
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
diff --git a/dts/Bindings/iio/adc/brcm,iproc-static-adc.txt b/dts/Bindings/iio/adc/brcm,iproc-static-adc.txt
new file mode 100644
index 0000000000..caaaed765c
--- /dev/null
+++ b/dts/Bindings/iio/adc/brcm,iproc-static-adc.txt
@@ -0,0 +1,41 @@
+* Broadcom's IPROC Static ADC controller
+
+Broadcom iProc ADC controller has 8 channels 10bit ADC.
+Allows user to convert analog input voltage values to digital.
+
+Required properties:
+
+- compatible: Must be "brcm,iproc-static-adc"
+
+- adc-syscon: Handler of syscon node defining physical base address of the
+ controller and length of memory mapped region.
+
+- #io-channel-cells = <1>; As ADC has multiple outputs
+ refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- io-channel-ranges:
+ refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- clocks: Clock used for this block.
+
+- clock-names: Clock name should be given as tsc_clk.
+
+- interrupts: interrupt line number.
+
+For example:
+
+ ts_adc_syscon: ts_adc_syscon@180a6000 {
+ compatible = "brcm,iproc-ts-adc-syscon","syscon";
+ reg = <0x180a6000 0xc30>;
+ };
+
+ adc: adc@180a6000 {
+ compatible = "brcm,iproc-static-adc";
+ adc-syscon = <&ts_adc_syscon>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
diff --git a/dts/Bindings/iio/adc/max1363.txt b/dts/Bindings/iio/adc/max1363.txt
new file mode 100644
index 0000000000..94a9011dd8
--- /dev/null
+++ b/dts/Bindings/iio/adc/max1363.txt
@@ -0,0 +1,63 @@
+* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC)
+
+The node for this driver must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+ Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+ - compatible: Should be one of
+ "maxim,max1361"
+ "maxim,max1362"
+ "maxim,max1363"
+ "maxim,max1364"
+ "maxim,max1036"
+ "maxim,max1037"
+ "maxim,max1038"
+ "maxim,max1039"
+ "maxim,max1136"
+ "maxim,max1137"
+ "maxim,max1138"
+ "maxim,max1139"
+ "maxim,max1236"
+ "maxim,max1237"
+ "maxim,max1238"
+ "maxim,max1239"
+ "maxim,max11600"
+ "maxim,max11601"
+ "maxim,max11602"
+ "maxim,max11603"
+ "maxim,max11604"
+ "maxim,max11605"
+ "maxim,max11606"
+ "maxim,max11607"
+ "maxim,max11608"
+ "maxim,max11609"
+ "maxim,max11610"
+ "maxim,max11611"
+ "maxim,max11612"
+ "maxim,max11613"
+ "maxim,max11614"
+ "maxim,max11615"
+ "maxim,max11616"
+ "maxim,max11617"
+ "maxim,max11644"
+ "maxim,max11645"
+ "maxim,max11646"
+ "maxim,max11647"
+ - reg: Should contain the ADC I2C address
+
+Optional properties:
+ - vcc-supply: phandle to the regulator that provides power to the ADC.
+ - vref-supply: phandle to the regulator for ADC reference voltage.
+ - interrupts: IRQ line for the ADC. If not used the driver will use
+ polling.
+
+Example:
+adc: max11644@36 {
+ compatible = "maxim,max11644";
+ reg = <0x36>;
+ vref-supply = <&adc_vref>;
+};
diff --git a/dts/Bindings/iio/chemical/atlas,ec-sm.txt b/dts/Bindings/iio/chemical/atlas,ec-sm.txt
new file mode 100644
index 0000000000..2962bd9a2b
--- /dev/null
+++ b/dts/Bindings/iio/chemical/atlas,ec-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific EC-SM OEM sensor
+
+http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf
+
+Required properties:
+
+ - compatible: must be "atlas,ec-sm"
+ - reg: the I2C address of the sensor
+ - interrupt-parent: should be the phandle for the interrupt controller
+ - interrupts: the sole interrupt generated by the device
+
+ Refer to interrupt-controller/interrupts.txt for generic interrupt client
+ node bindings.
+
+Example:
+
+atlas@64 {
+ compatible = "atlas,ec-sm";
+ reg = <0x64>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 2>;
+};
diff --git a/dts/Bindings/iio/dac/ad5755.txt b/dts/Bindings/iio/dac/ad5755.txt
new file mode 100644
index 0000000000..f0bbd7e102
--- /dev/null
+++ b/dts/Bindings/iio/dac/ad5755.txt
@@ -0,0 +1,124 @@
+* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+
+Required properties:
+ - compatible: Has to contain one of the following:
+ adi,ad5755
+ adi,ad5755-1
+ adi,ad5757
+ adi,ad5735
+ adi,ad5737
+
+ - reg: spi chip select number for the device
+ - spi-cpha or spi-cpol: is the only modes that is supported
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+See include/dt-bindings/iio/ad5755.h
+ - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
+ external resistor and thereby bypasses
+ the internal compensation resistor.
+ - adi,dc-dc-phase:
+ Valid values for DC DC Phase control is:
+ 0: All dc-to-dc converters clock on the same edge.
+ 1: Channel A and Channel B clock on the same edge,
+ Channel C and Channel D clock on opposite edges.
+ 2: Channel A and Channel C clock on the same edge,
+ Channel B and Channel D clock on opposite edges.
+ 3: Channel A, Channel B, Channel C, and Channel D
+ clock 90 degrees out of phase from each other.
+ - adi,dc-dc-freq-hz:
+ Valid values for DC DC frequency is [Hz]:
+ 250000
+ 410000
+ 650000
+ - adi,dc-dc-max-microvolt:
+ Valid values for the maximum allowed Vboost voltage supplied by
+ the dc-to-dc converter is:
+ 23000000
+ 24500000
+ 27000000
+ 29500000
+
+Optional for every channel:
+ - adi,mode:
+ Valid values for DAC modes is:
+ 0: 0 V to 5 V voltage range.
+ 1: 0 V to 10 V voltage range.
+ 2: Plus minus 5 V voltage range.
+ 3: Plus minus 10 V voltage range.
+ 4: 4 mA to 20 mA current range.
+ 5: 0 mA to 20 mA current range.
+ 6: 0 mA to 24 mA current range.
+ - adi,ext-current-sense-resistor: boolean set if the hardware a external
+ current sense resistor.
+ - adi,enable-voltage-overrange: boolean enable voltage overrange
+ - adi,slew: Array of slewrate settings should contain 3 fields:
+ 1: Should be either 0 or 1 in order to enable or disable slewrate.
+ 2: Slew rate settings:
+ Valid values for the slew rate update frequency:
+ 64000
+ 32000
+ 16000
+ 8000
+ 4000
+ 2000
+ 1000
+ 500
+ 250
+ 125
+ 64
+ 32
+ 16
+ 8
+ 4
+ 0
+ 3: Slew step size:
+ Valid values for the step size LSBs:
+ 1
+ 2
+ 4
+ 16
+ 32
+ 64
+ 128
+ 256
+
+Example:
+dac@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "adi,ad5755";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ adi,dc-dc-phase = <0>;
+ adi,dc-dc-freq-hz = <410000>;
+ adi,dc-dc-max-microvolt = <23000000>;
+ channel@0 {
+ reg = <0>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+ channel@1 {
+ reg = <1>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+ channel@2 {
+ reg = <2>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+ channel@3 {
+ reg = <3>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+};
diff --git a/dts/Bindings/iio/pressure/bmp085.txt b/dts/Bindings/iio/pressure/bmp085.txt
index d7a6deb6b2..c7198a03c9 100644
--- a/dts/Bindings/iio/pressure/bmp085.txt
+++ b/dts/Bindings/iio/pressure/bmp085.txt
@@ -1,7 +1,11 @@
-BMP085/BMP18x digital pressure sensors
+BMP085/BMP18x/BMP28x digital pressure sensors
Required properties:
-- compatible: bosch,bmp085
+- compatible: must be one of:
+ "bosch,bmp085"
+ "bosch,bmp180"
+ "bosch,bmp280"
+ "bosch,bme280"
Optional properties:
- chip-id: configurable chip id for non-default chip revisions
@@ -10,6 +14,10 @@ Optional properties:
value range is 0-3 with rising sensitivity.
- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ
+- reset-gpios: a GPIO line handling reset of the sensor: as the line is
+ active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
+- vddd-supply: digital voltage regulator (see regulator/regulator.txt)
+- vdda-supply: analog voltage regulator (see regulator/regulator.txt)
Example:
@@ -21,4 +29,7 @@ pressure@77 {
default-oversampling = <2>;
interrupt-parent = <&gpio0>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ vddd-supply = <&foo>;
+ vdda-supply = <&bar>;
};
diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt
index 5844cf7286..e41fe34016 100644
--- a/dts/Bindings/iio/st-sensors.txt
+++ b/dts/Bindings/iio/st-sensors.txt
@@ -64,3 +64,4 @@ Pressure sensors:
- st,lps001wp-press
- st,lps25h-press
- st,lps331ap-press
+- st,lps22hb-press
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 03:36:25 +0000