diff options
Diffstat (limited to 'dts/Bindings/media/renesas,drif.txt')
| -rw-r--r-- | dts/Bindings/media/renesas,drif.txt | 177 |
1 files changed, 0 insertions, 177 deletions
diff --git a/dts/Bindings/media/renesas,drif.txt b/dts/Bindings/media/renesas,drif.txt deleted file mode 100644 index 0d8974aa8b..0000000000 --- a/dts/Bindings/media/renesas,drif.txt +++ /dev/null @@ -1,177 +0,0 @@ -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF) ------------------------------------------------------------- - -R-Car Gen3 DRIF is a SPI like receive only slave device. A general -representation of DRIF interfacing with a master device is shown below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - -As per datasheet, each DRIF channel (drifn) is made up of two internal -channels (drifn0 & drifn1). These two internal channels share the common -CLK & SYNC. Each internal channel has its own dedicated resources like -irq, dma channels, address space & clock. This internal split is not -visible to the external master device. - -The device tree model represents each internal channel as a separate node. -The internal channels sharing the CLK & SYNC are tied together by their -phandles using a property called "renesas,bonding". For the rest of -the documentation, unless explicitly stated, the word channel implies an -internal channel. - -When both internal channels are enabled they need to be managed together -as one (i.e.) they cannot operate alone as independent devices. Out of the -two, one of them needs to act as a primary device that accepts common -properties of both the internal channels. This channel is identified by a -property called "renesas,primary-bond". - -To summarize, - - When both the internal channels that are bonded together are enabled, - the zeroth channel is selected as primary-bond. This channels accepts - properties common to all the members of the bond. - - When only one of the bonded channels need to be enabled, the property - "renesas,bonding" or "renesas,primary-bond" will have no effect. That - enabled channel can act alone as any other independent device. - -Required properties of an internal channel: -------------------------------------------- -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of that channel. -- interrupts: associated with that channel. -- clocks: phandle and clock specifier of that channel. -- clock-names: clock input name string: "fck". -- dmas: phandles to the DMA channels. -- dma-names: names of the DMA channel: "rx". -- renesas,bonding: phandle to the other channel. - -Optional properties of an internal channel: -------------------------------------------- -- power-domains: phandle to the respective power domain. - -Required properties of an internal channel when: - - It is the only enabled channel of the bond (or) - - If it acts as primary among enabled bonds --------------------------------------------------------- -- pinctrl-0: pin control group to be used for this channel. -- pinctrl-names: must be "default". -- renesas,primary-bond: empty property indicating the channel acts as primary - among the bonded channels. -- port: child port node corresponding to the data input, in accordance with - the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The port - node must contain at least one endpoint. - -Optional endpoint property: ---------------------------- -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively. - This property maps to SYNCAC bit in the hardware manual. The - default is 1 (active high). - -Example: --------- - -(1) Both internal channels enabled: ------------------------------------ - -When interfacing with a third party tuner device with two data pins as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - renesas,primary-bond; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - }; - }; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - }; - - -(2) Internal channel 1 alone is enabled: ----------------------------------------- - -When interfacing with a third party tuner device with one data pin as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| | |D0 (unused) | -| |-----SD-------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - sync-active = <0>; - }; - }; - }; |