1 files changed, 0 insertions, 85 deletions
diff --git a/dts/Bindings/mfd/cirrus,lochnagar.txt b/dts/Bindings/mfd/cirrus,lochnagar.txt
deleted file mode 100644
index 3bf92ad37f..0000000000
--- a/dts/Bindings/mfd/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-Also see these documents for generic binding information:
-  [1] GPIO : ../gpio/gpio.txt
-
-And these for relevant defines:
-  [2] include/dt-bindings/pinctrl/lochnagar.h
-  [3] include/dt-bindings/clock/lochnagar.h
-
-And these documents for the required sub-node binding details:
-  [4] Clock: ../clock/cirrus,lochnagar.txt
-  [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
-  [6] Regulator: ../regulator/cirrus,lochnagar.txt
-  [7] Sound: ../sound/cirrus,lochnagar.txt
-  [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar1"
-                 "cirrus,lochnagar2"
-
-  - reg : I2C slave address
-
-  - reset-gpios : Reset line to the Lochnagar, see [1].
-
-Required sub-nodes:
-
-  - lochnagar-clk : Binding for the clocking components, see [4].
-
-  - lochnagar-pinctrl : Binding for the pin control components, see [5].
-
-Optional sub-nodes:
-
-  - Bindings for the regulator components, see [6]. Only available on
-    Lochnagar 2.
-
-  - lochnagar-sc : Binding for the sound card components, see [7].
-                   Only available on Lochnagar 2.
-  - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
-                      Only available on Lochnagar 2.
-
-Optional properties:
-
-  - present-gpios : Host present line, indicating the presence of a
-    host system, see [1]. This can be omitted if the present line is
-    tied in hardware.
-
-Example:
-
-lochnagar: lochnagar@22 {
-	compatible = "cirrus,lochnagar2";
-	reg = <0x22>;
-
-	reset-gpios = <&gpio0 55 0>;
-	present-gpios = <&gpio0 60 0>;
-
-	lochnagar-clk {
-		compatible = "cirrus,lochnagar2-clk";
-		...
-	};
-
-	lochnagar-pinctrl {
-		compatible = "cirrus,lochnagar-pinctrl";
-		...
-	};
-
-	lochnagar-sc {
-		compatible = "cirrus,lochnagar2-soundcard";
-		...
-	};
-
-	lochnagar-hwmon {
-		compatible = "cirrus,lochnagar2-hwmon";
-		...
-	};
-};