diff options
Diffstat (limited to 'dts/Bindings/mfd/qcom,spmi-pmic.yaml')
| -rw-r--r-- | dts/Bindings/mfd/qcom,spmi-pmic.yaml | 114 |
1 files changed, 110 insertions, 4 deletions
diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/Bindings/mfd/qcom,spmi-pmic.yaml index 65cbc6dee5..6a3e3ede1e 100644 --- a/dts/Bindings/mfd/qcom,spmi-pmic.yaml +++ b/dts/Bindings/mfd/qcom,spmi-pmic.yaml @@ -33,19 +33,22 @@ properties: compatible: items: - enum: - - qcom,pm660 - - qcom,pm660l - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 + - qcom,pm660 + - qcom,pm660l + - qcom,pm7250b - qcom,pm7325 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 - qcom,pm8019 + - qcom,pm8028 - qcom,pm8110 - qcom,pm8150 - qcom,pm8150b + - qcom,pm8150c - qcom,pm8150l - qcom,pm8226 - qcom,pm8350 @@ -56,6 +59,7 @@ properties: - qcom,pm8916 - qcom,pm8941 - qcom,pm8950 + - qcom,pm8953 - qcom,pm8994 - qcom,pm8998 - qcom,pma8084 @@ -64,8 +68,10 @@ properties: - qcom,pmi8962 - qcom,pmi8994 - qcom,pmi8998 + - qcom,pmk8002 - qcom,pmk8350 - qcom,pmm8155au + - qcom,pmp8074 - qcom,pmr735a - qcom,pmr735b - qcom,pms405 @@ -90,7 +96,7 @@ properties: regulators: type: object - $ref: /schemas/regulator/regulator.yaml# + $ref: /schemas/regulator/qcom,spmi-regulator.yaml# patternProperties: "^adc@[0-9a-f]+$": @@ -99,7 +105,7 @@ patternProperties: "^adc-tm@[0-9a-f]+$": type: object - $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + # ref depends on compatible, see allOf below "^audio-codec@[0-9a-f]+$": type: object @@ -146,6 +152,22 @@ required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998 + then: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml# + else: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + additionalProperties: false examples: @@ -188,3 +210,87 @@ examples: }; }; }; + + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/iio/qcom,spmi-vadc.h> + #include <dt-bindings/spmi/spmi.h> + + pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + + adc-chan@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + + pm6150_gpio: gpios@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; |